[Fri Oct 14 22:28:32 2011] Detection parameters:
  Position = (594.5, 572.4) = 5 47 47.22 -70 24 47.5
  Extent = 0.6" x 0.5", rotation angle = 45 degrees
  Source counts = 43.7 +/- 10.3
  Background counts = 63.3
  Rate = 0.0007 +/- 0.0002

[Fri Oct 14 22:28:34 2011] Off-axis axis estimate = 2.30'
[Fri Oct 14 22:30:00 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:00 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Oct 14 22:30:00 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.078
[Fri Oct 14 22:30:00 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.46"
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src26.ximg exists
[Fri Oct 14 22:30:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src26.csv
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src26_1.ximg exists
[Fri Oct 14 22:30:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src26.csv
[Fri Oct 14 22:30:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:03 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Fri Oct 14 22:30:03 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Oct 14 22:30:03 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Fri Oct 14 22:30:20 2011] Spatial fit model total counts = 427.970000, observed total counts = 446.000000
[Fri Oct 14 22:30:20 2011] Offset between fit and detection position for source 38 = 1.039502 pixels
[Fri Oct 14 22:30:20 2011] 432.733300 total counts/ 393.791000 bgd. counts: snr = 1.962405
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 1.039502 pixels
  Position = (595.2, 571.7) = 5 47 47.19 -70 24 48.1
  Extent = 0.9 (0.3-1.5)", rotation angle = 0
  Source counts = 38.9 +/- 20.8
  Background counts = 393.8
  Rate = 0.0007 +/- 0.0004
[Fri Oct 14 22:30:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:30:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:30:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:30:20 2011] Source does appear to be extended
[Fri Oct 14 22:30:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:30:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:45 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Oct 14 22:30:45 2011] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.658
[Fri Oct 14 22:30:45 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.93"
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src25.ximg exists
[Fri Oct 14 22:30:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src25.csv
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src25_1.ximg exists
[Fri Oct 14 22:30:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src25.csv
[Fri Oct 14 22:30:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:49 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Fri Oct 14 22:30:49 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Oct 14 22:30:49 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Oct 14 22:31:07 2011] Spatial fit model total counts = 430.674000, observed total counts = 445.000000
[Fri Oct 14 22:31:07 2011] Offset between fit and detection position for source 38 = 0.083059 pixels
[Fri Oct 14 22:31:07 2011] 436.154600 total counts/ 399.830000 bgd. counts: snr = 1.816616
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.083059 pixels
  Position = (595.2, 571.7) = 5 47 47.20 -70 24 48.1
  Extent = 0.9 (0.3-1.7)", rotation angle = 0
  Source counts = 36.3 +/- 20.9
  Background counts = 399.8
  Rate = 0.0006 +/- 0.0004
[Fri Oct 14 22:31:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:31:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:31:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:31:07 2011] Source does appear to be extended
[Fri Oct 14 22:31:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:33:28 2011] Not overwriting source region fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_src.reg
[Fri Oct 14 22:33:28 2011] Extracting stamp from image fullrun_ccd7_acisf01992_pi14-548_cl_sm2.00.img.gz, (554, 530) - (637, 613)
[Fri Oct 14 22:33:28 2011] Writing fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38.gif
[Fri Oct 14 22:35:13 2011] ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_src.evt and ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_bgd.evt exist, delete to re-create
[Fri Oct 14 22:35:13 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_src.evt.gz[events] = 308 counts
[Fri Oct 14 22:35:13 2011] Mean chipx,y = (491.48, 473.98)
[Fri Oct 14 22:35:13 2011] Mean tdetx,y = (4408.48, 2175.98)
[Fri Oct 14 22:35:13 2011] chipx,y range = (472.00-518.00, 451.00-498.00)
[Fri Oct 14 22:35:13 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 2000 counts
[Fri Oct 14 22:35:13 2011] ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_src.img and ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_bgd.img exist, delete to re-create
[Fri Oct 14 22:35:13 2011] ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_src.pi and ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_bgd.pi exist, delete to re-create
[Fri Oct 14 22:35:13 2011] Not generating rmf since there are only 36 counts
[Fri Oct 14 22:35:17 2011] ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_src.lc and ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_bgd.lc exist, delete to re-create
[Fri Oct 14 22:37:06 2011] 234.134
[Fri Oct 14 22:37:12 2011] Updating aperture counts using extracted products
[Fri Oct 14 22:37:12 2011] Error reading totcts from fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38_src.pi.gz
[Fri Oct 14 22:37:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:37:12 2011] Using photon index=1.80, rate=0.000623, arf fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src38.arf
[Fri Oct 14 22:37:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:37:12 2011] Updating source flux to 5e-15
[Fri Oct 14 22:37:45 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting