[Fri Oct 14 22:28:32 2011] Detection parameters:
  Position = (485.3, 515.7) = 5 47 57.90 -70 25 15.4
  Extent = 0.6" x 0.5", rotation angle = 155 degrees
  Source counts = 32.3 +/- 6.7
  Background counts = 12.7
  Rate = 0.0005 +/- 0.0001

[Fri Oct 14 22:28:34 2011] Off-axis axis estimate = 2.85'
[Fri Oct 14 22:30:00 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:00 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct 14 22:30:00 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.859
[Fri Oct 14 22:30:00 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.55"
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src37.ximg exists
[Fri Oct 14 22:30:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src37.csv
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src37_1.ximg exists
[Fri Oct 14 22:30:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src37.csv
[Fri Oct 14 22:30:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:03 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Fri Oct 14 22:30:03 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Oct 14 22:30:03 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Oct 14 22:30:20 2011] Source 32 is offset by -4.167281 and -5.821090 pixels which is larger than
2 X fitted extent = 0.559362 x 0.559362, not incorporating fit results
[Fri Oct 14 22:30:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:30:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:30:20 2011] Assessing source extent using major
[Fri Oct 14 22:30:20 2011] Source does appear to be extended
[Fri Oct 14 22:30:20 2011] Computing asymmetry using major and minor axis, asym = 1.13
[Fri Oct 14 22:30:45 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:45 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct 14 22:30:45 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.859
[Fri Oct 14 22:30:45 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 0.55"
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src35.ximg exists
[Fri Oct 14 22:30:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src35.csv
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src35_1.ximg exists
[Fri Oct 14 22:30:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src35.csv
[Fri Oct 14 22:30:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:49 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Fri Oct 14 22:30:49 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Oct 14 22:30:49 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Fri Oct 14 22:31:07 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 17.705926 pixels away
[Fri Oct 14 22:31:07 2011] Spatial fit model total counts = 112.312000, observed total counts = 111.000000
[Fri Oct 14 22:31:07 2011] Offset between fit and detection position for source 32 = 4.449322 pixels
[Fri Oct 14 22:31:07 2011] 115.141200 total counts/ 60.487100 bgd. counts: snr = 7.027346
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 4.449322 pixels
  Position = (485.9, 520.1) = 5 47 57.89 -70 25 13.4
  Extent = 1.5 (1.2-3.0)", rotation angle = 0
  Source counts = 54.7 +/- 10.7
  Background counts = 60.5
  Rate = 0.0009 +/- 0.0002
[Fri Oct 14 22:31:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:31:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:31:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:31:07 2011] Source does appear to be extended
[Fri Oct 14 22:31:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:31:07 2011] Source is confused with source 33
[Fri Oct 14 22:33:28 2011] Not overwriting source region fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_src.reg
[Fri Oct 14 22:33:28 2011] Extracting stamp from image fullrun_ccd7_acisf01992_pi14-548_cl_sm2.00.img.gz, (417, 451) - (554, 589)
[Fri Oct 14 22:33:28 2011] Writing fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32.gif
[Fri Oct 14 22:35:52 2011] ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_src.evt and ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_bgd.evt exist, delete to re-create
[Fri Oct 14 22:35:52 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_src.evt.gz[events] = 224 counts
[Fri Oct 14 22:35:52 2011] Mean chipx,y = (549.67, 579.61)
[Fri Oct 14 22:35:52 2011] Mean tdetx,y = (4466.67, 2281.61)
[Fri Oct 14 22:35:52 2011] chipx,y range = (527.00-578.00, 554.00-603.00)
[Fri Oct 14 22:35:52 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_bgd.evt.gz[events] = 603 counts
[Fri Oct 14 22:35:52 2011] ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_src.img and ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_bgd.img exist, delete to re-create
[Fri Oct 14 22:35:52 2011] ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_src.pi and ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_bgd.pi exist, delete to re-create
[Fri Oct 14 22:35:52 2011] Not generating rmf since there are only 54 counts
[Fri Oct 14 22:35:55 2011] ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_src.lc and ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_bgd.lc exist, delete to re-create
[Fri Oct 14 22:37:06 2011] 233.327
[Fri Oct 14 22:37:12 2011] Updating aperture counts using extracted products
[Fri Oct 14 22:37:12 2011] Error reading totcts from fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32_src.pi.gz
[Fri Oct 14 22:37:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:37:12 2011] Using photon index=1.80, rate=0.000938, arf fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src32.arf
[Fri Oct 14 22:37:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:37:12 2011] Updating source flux to 7.5e-15
[Fri Oct 14 22:37:45 2011] Flag b found in src. 32 procflags, skipping spectral fitting
[Fri Oct 14 22:37:45 2011] Flag c found in src. 32 procflags, skipping spectral fitting
[Fri Oct 14 22:37:45 2011] Source 32 has fewer than 100.000000 counts, skipping spectral fitting