[Fri Oct 14 22:28:31 2011] Detection parameters:
  Position = (426.8, 340.6) = 5 48 3.65 -70 26 41.5
  Extent = 0.6" x 0.5", rotation angle = 102 degrees
  Source counts = 11.6 +/- 3.7
  Background counts = 2.4
  Rate = 0.0002 +/- 6e-05

[Fri Oct 14 22:28:34 2011] Off-axis axis estimate = 4.36'
[Fri Oct 14 22:30:00 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:00 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Fri Oct 14 22:30:00 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Fri Oct 14 22:30:00 2011] Giving source the simple spatial ID 60 for pass 0, mean size = 0.94"
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src60.ximg exists
[Fri Oct 14 22:30:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src60.csv
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src60_1.ximg exists
[Fri Oct 14 22:30:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src60.csv
[Fri Oct 14 22:30:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:04 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src60.ximg exists
[Fri Oct 14 22:30:04 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src60_1.ximg exists
[Fri Oct 14 22:30:04 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src60 appears to have run properly
[Fri Oct 14 22:30:20 2011] Spatial fit model total counts = 34.984400, observed total counts = 35.000000
[Fri Oct 14 22:30:20 2011] Offset between fit and detection position for source 26 = 3.175559 pixels
[Fri Oct 14 22:30:20 2011] 34.364650 total counts/ 6.739650 bgd. counts: snr = 10.641029
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 3.175559 pixels
  Position = (429.7, 341.9) = 5 48 3.41 -70 26 41.1
  Extent = 1.1 (0.8-1.6)", rotation angle = 0
  Source counts = 27.6 +/- 5.9
  Background counts = 6.7
  Rate = 0.0005 +/- 0.0001
[Fri Oct 14 22:30:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:30:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:30:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:30:20 2011] Source does appear to be extended
[Fri Oct 14 22:30:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:30:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:45 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Fri Oct 14 22:30:45 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.960
[Fri Oct 14 22:30:45 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 1.13"
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src49.ximg exists
[Fri Oct 14 22:30:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src49.csv
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src49_1.ximg exists
[Fri Oct 14 22:30:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src49.csv
[Fri Oct 14 22:30:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:50 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Fri Oct 14 22:30:50 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Oct 14 22:30:50 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Oct 14 22:31:07 2011] Spatial fit model total counts = 31.486600, observed total counts = 35.000000
[Fri Oct 14 22:31:07 2011] Offset between fit and detection position for source 26 = 0.336127 pixels
[Fri Oct 14 22:31:07 2011] 28.819960 total counts/ 1.710060 bgd. counts: snr = 20.731095
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.336127 pixels
  Position = (429.7, 342.3) = 5 48 3.41 -70 26 40.9
  Extent = 1.4 (1.1-2.0)" x 0.7 (0.5-1.0)", rotation angle = 333 (316-350) degrees
  Source counts = 27.1 +/- 5.4
  Background counts = 1.7
  Rate = 0.0005 +/- 9e-05
[Fri Oct 14 22:31:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:31:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:31:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:31:07 2011] Source does appear to be extended
[Fri Oct 14 22:31:07 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Fri Oct 14 22:33:31 2011] Not overwriting source region fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_src.reg
[Fri Oct 14 22:33:31 2011] Extracting stamp from image fullrun_ccd7_acisf01992_pi14-548_cl_sm2.00.img.gz, (365, 277) - (495, 407)
[Fri Oct 14 22:33:31 2011] Writing fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26.gif
[Fri Oct 14 22:36:47 2011] ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_src.evt and ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Fri Oct 14 22:36:47 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_src.evt.gz[events] = 32 counts
[Fri Oct 14 22:36:47 2011] Mean chipx,y = (735.72, 623.19)
[Fri Oct 14 22:36:47 2011] Mean tdetx,y = (4652.72, 2325.19)
[Fri Oct 14 22:36:47 2011] chipx,y range = (718.00-753.00, 605.00-646.00)
[Fri Oct 14 22:36:48 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 156 counts
[Fri Oct 14 22:36:48 2011] ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_src.img and ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Fri Oct 14 22:36:48 2011] ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_src.pi and ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Fri Oct 14 22:36:48 2011] Not generating rmf since there are only 27 counts
[Fri Oct 14 22:36:56 2011] ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_src.lc and ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Fri Oct 14 22:37:07 2011] 226.299
[Fri Oct 14 22:37:12 2011] Updating aperture counts using extracted products
[Fri Oct 14 22:37:12 2011] Error reading totcts from fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26_src.pi.gz
[Fri Oct 14 22:37:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:37:12 2011] Using photon index=1.80, rate=0.000465, arf fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src26.arf
[Fri Oct 14 22:37:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:37:12 2011] Updating source flux to 3.8e-15
[Fri Oct 14 22:37:45 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting