[Fri Oct 14 22:28:31 2011] Detection parameters:
  Position = (194.7, 1001.2) = 5 48 26.22 -70 21 16.3
  Extent = 0.6" x 0.5", rotation angle = 151 degrees
  Source counts = 39.1 +/- 6.6
  Background counts = 4.9
  Rate = 0.0007 +/- 0.0001

[Fri Oct 14 22:28:34 2011] Off-axis axis estimate = 3.32'
[Fri Oct 14 22:30:00 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:00 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Fri Oct 14 22:30:00 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.209
[Fri Oct 14 22:30:00 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.65"
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src28.ximg exists
[Fri Oct 14 22:30:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src28.csv
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src28_1.ximg exists
[Fri Oct 14 22:30:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src28.csv
[Fri Oct 14 22:30:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:03 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Fri Oct 14 22:30:03 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Oct 14 22:30:03 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Oct 14 22:30:20 2011] Source 20 is offset by -4.553808 and -6.053808 pixels which is larger than
2 X fitted extent = 0.659500 x 0.659500, not incorporating fit results
[Fri Oct 14 22:30:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:30:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:30:20 2011] Assessing source extent using major
[Fri Oct 14 22:30:20 2011] Source does appear to be extended
[Fri Oct 14 22:30:20 2011] Computing asymmetry using major and minor axis, asym = 1.26
[Fri Oct 14 22:30:45 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:45 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Fri Oct 14 22:30:45 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.209
[Fri Oct 14 22:30:45 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 0.65"
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src27.ximg exists
[Fri Oct 14 22:30:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src27.csv
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src27_1.ximg exists
[Fri Oct 14 22:30:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src27.csv
[Fri Oct 14 22:30:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:49 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Fri Oct 14 22:30:49 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Oct 14 22:30:49 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Oct 14 22:31:07 2011] Spatial fit model total counts = 50.999000, observed total counts = 51.000000
[Fri Oct 14 22:31:07 2011] Offset between fit and detection position for source 20 = 0.878684 pixels
[Fri Oct 14 22:31:07 2011] 51.149400 total counts/ 15.710000 bgd. counts: snr = 8.941251
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.878684 pixels
  Position = (195.5, 1001.6) = 5 48 26.20 -70 21 16.3
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 35.4 +/- 7.2
  Background counts = 15.7
  Rate = 0.0006 +/- 0.0001
[Fri Oct 14 22:31:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:31:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:31:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:31:07 2011] Source does appear to be extended
[Fri Oct 14 22:31:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:33:28 2011] Not overwriting source region fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_src.reg
[Fri Oct 14 22:33:28 2011] Extracting stamp from image fullrun_ccd7_acisf01992_pi14-548_cl_sm2.00.img.gz, (162, 968) - (229, 1035)
[Fri Oct 14 22:33:28 2011] Writing fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20.gif
[Fri Oct 14 22:35:20 2011] ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_src.evt and ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Fri Oct 14 22:35:20 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_src.evt.gz[events] = 45 counts
[Fri Oct 14 22:35:20 2011] Mean chipx,y = (91.11, 899.04)
[Fri Oct 14 22:35:20 2011] Mean tdetx,y = (4008.11, 2601.04)
[Fri Oct 14 22:35:20 2011] chipx,y range = (72.00-110.00, 881.00-921.00)
[Fri Oct 14 22:35:20 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 29 counts
[Fri Oct 14 22:35:20 2011] ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_src.img and ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Fri Oct 14 22:35:20 2011] ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_src.pi and ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Fri Oct 14 22:35:20 2011] Not generating rmf since there are only 35 counts
[Fri Oct 14 22:35:24 2011] ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_src.lc and ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Fri Oct 14 22:37:06 2011] 230.683
[Fri Oct 14 22:37:12 2011] Updating aperture counts using extracted products
[Fri Oct 14 22:37:12 2011] Error reading totcts from fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20_src.pi.gz
[Fri Oct 14 22:37:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:37:12 2011] Using photon index=1.80, rate=0.000608, arf fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src20.arf
[Fri Oct 14 22:37:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:37:12 2011] Updating source flux to 4.9e-15
[Fri Oct 14 22:37:45 2011] Flag b found in src. 20 procflags, skipping spectral fitting
[Fri Oct 14 22:37:45 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting