[Fri Oct 14 22:28:29 2011] Detection parameters:
  Position = (652.0, 609.1) = 5 47 41.59 -70 24 29.4
  Extent = 1.0" x 0.9", rotation angle = 138 degrees
  Source counts = 218.5 +/- 18.5
  Background counts = 122.5
  Rate = 0.004 +/- 0.0003

[Fri Oct 14 22:28:34 2011] Off-axis axis estimate = 2.10'
[Fri Oct 14 22:30:00 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:00 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Oct 14 22:30:00 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.771
[Fri Oct 14 22:30:00 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.44"
[Fri Oct 14 22:30:01 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 14 22:30:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src3.csv
[Fri Oct 14 22:30:01 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 14 22:30:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src3.csv
[Fri Oct 14 22:30:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 14 22:30:02 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 14 22:30:20 2011] Spatial fit model total counts = 536.134000, observed total counts = 536.000000
[Fri Oct 14 22:30:20 2011] Offset between fit and detection position for source 2 = 2.021843 pixels
[Fri Oct 14 22:30:20 2011] 524.075000 total counts/ 364.312000 bgd. counts: snr = 8.370270
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.021843 pixels
  Position = (652.4, 607.2) = 5 47 41.60 -70 24 30.6
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 159.8 +/- 22.9
  Background counts = 364.3
  Rate = 0.003 +/- 0.0004
[Fri Oct 14 22:30:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:30:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:30:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:30:20 2011] Source does appear to be extended
[Fri Oct 14 22:30:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:30:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 22:30:45 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct 14 22:30:45 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Fri Oct 14 22:30:45 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.50"
[Fri Oct 14 22:30:46 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 14 22:30:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src3.csv
[Fri Oct 14 22:30:47 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 14 22:30:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src3.csv
[Fri Oct 14 22:30:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 14 22:30:48 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 14 22:31:07 2011] Warning, spatial fit 3 centroid is now closest to src. 62
[Fri Oct 14 22:31:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:31:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:31:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:31:07 2011] Source does appear to be extended
[Fri Oct 14 22:31:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:33:27 2011] Not overwriting source region fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 14 22:33:27 2011] Extracting stamp from image fullrun_ccd7_acisf01992_pi14-548_cl_sm2.00.img.gz, (584, 539) - (721, 676)
[Fri Oct 14 22:33:27 2011] Writing fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2.gif
[Fri Oct 14 22:33:40 2011] ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_src.evt and ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 14 22:33:40 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_src.evt.gz[events] = 806 counts
[Fri Oct 14 22:33:40 2011] Mean chipx,y = (455.09, 420.13)
[Fri Oct 14 22:33:40 2011] Mean tdetx,y = (4372.09, 2122.13)
[Fri Oct 14 22:33:40 2011] chipx,y range = (428.00-483.00, 390.00-446.00)
[Fri Oct 14 22:33:40 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 3878 counts
[Fri Oct 14 22:33:40 2011] ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_src.img and ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 14 22:33:40 2011] ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_src.pi and ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 14 22:33:46 2011] ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_src.lc and ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 14 22:37:05 2011] Keeping rmf generated by specextract
[Fri Oct 14 22:37:05 2011] 236.544
[Fri Oct 14 22:37:11 2011] Updating aperture counts using extracted products
[Fri Oct 14 22:37:11 2011] Error reading totcts from fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 14 22:37:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:37:12 2011] Using photon index=1.80, rate=0.00274, arf fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src2.arf
[Fri Oct 14 22:37:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:37:12 2011] Updating source flux to 2.2e-14