[Fri Oct 14 22:28:24 2011] Detection parameters:
  Position = (514.4, 553.4) = 5 50 8.61 -70 25 40.7
  Extent = 6.9" x 4.7", rotation angle = 117 degrees
  Source counts = 144.9 +/- 15.0
  Background counts = 79.1
  Rate = 0.002 +/- 0.0003

[Fri Oct 14 22:28:25 2011] Off-axis axis estimate = 12.09'
[Fri Oct 14 22:29:58 2011] Using EEF radius (= 6.53 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:29:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 22:29:58 2011] Initial guess for spatial extent in simple fitting = 6.53"
[Fri Oct 14 22:29:58 2011] source mask rpix=13.3, npix_max = 758, mask sum = 729, frac = 0.961
[Fri Oct 14 22:29:58 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 6.53"
[Fri Oct 14 22:29:58 2011] fullrun_ccd3_acisf01992_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 22:29:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01992_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 22:29:58 2011] fullrun_ccd3_acisf01992_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 22:29:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01992_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 22:29:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01992_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01992_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:29:58 2011] fullrun_ccd3_acisf01992_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 22:29:58 2011] fullrun_ccd3_acisf01992_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 22:29:58 2011] Fit fullrun_ccd3_acisf01992_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 22:30:10 2011] Spatial fit model total counts = 316.364000, observed total counts = 314.000000
[Fri Oct 14 22:30:10 2011] Offset between fit and detection position for source 2 = 2.771766 pixels
[Fri Oct 14 22:30:10 2011] 316.012000 total counts/ 145.448000 bgd. counts: snr = 14.142738
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.771766 pixels
  Position = (516.6, 555.0) = 5 50 8.44 -70 25 40.2
  Extent = 6.1 (5.2-6.9)", rotation angle = 0
  Source counts = 170.6 +/- 17.8
  Background counts = 145.4
  Rate = 0.003 +/- 0.0003
[Fri Oct 14 22:30:10 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:30:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:30:10 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:30:10 2011] Source does appear to be extended
[Fri Oct 14 22:30:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:30:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 22:30:41 2011] Initial guess for spatial extent in simple fitting = 6.10"
[Fri Oct 14 22:30:41 2011] source mask rpix=12.4, npix_max = 666, mask sum = 676, frac = 1.014
[Fri Oct 14 22:30:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.10"
[Fri Oct 14 22:30:41 2011] fullrun_ccd3_acisf01992_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 22:30:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01992_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 22:30:41 2011] fullrun_ccd3_acisf01992_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 22:30:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01992_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 22:30:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01992_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01992_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:42 2011] fullrun_ccd3_acisf01992_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 22:30:42 2011] fullrun_ccd3_acisf01992_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 22:30:42 2011] Fit fullrun_ccd3_acisf01992_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 22:30:57 2011] Warning, spatial fit 1 centroid is now closest to src. 6
[Fri Oct 14 22:30:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:30:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:30:57 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:30:57 2011] Source does appear to be extended
[Fri Oct 14 22:30:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:31:32 2011] Not overwriting source region fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 14 22:31:32 2011] Extracting stamp from image fullrun_ccd3_acisf01992_pi14-548_cl_sm2.00.img.gz, (237, 276) - (796, 834)
[Fri Oct 14 22:31:32 2011] Writing fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2.gif
[Fri Oct 14 22:31:33 2011] ../../acisf01992/products/events/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_src.evt and ../../acisf01992/products/events/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 14 22:31:33 2011] Size of ../../acisf01992/products/events/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_src.evt.gz[events] = 263 counts
[Fri Oct 14 22:31:33 2011] Mean chipx,y = (548.25, 513.29)
[Fri Oct 14 22:31:33 2011] Mean tdetx,y = (4618.71, 3609.25)
[Fri Oct 14 22:31:33 2011] chipx,y range = (499.00-605.00, 449.00-572.00)
[Fri Oct 14 22:31:34 2011] Size of ../../acisf01992/products/events/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 1066 counts
[Fri Oct 14 22:31:34 2011] ../../acisf01992/products/images/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_src.img and ../../acisf01992/products/images/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 14 22:31:34 2011] ../../acisf01992/products/spectra/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_src.pi and ../../acisf01992/products/spectra/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 14 22:31:40 2011] ../../acisf01992/products/lightcurves/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_src.lc and ../../acisf01992/products/lightcurves/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 14 22:32:12 2011] Keeping rmf generated by specextract
[Fri Oct 14 22:32:12 2011] 155.781
[Fri Oct 14 22:37:11 2011] Updating aperture counts using extracted products
[Fri Oct 14 22:37:11 2011] Error reading totcts from fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 14 22:37:11 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:37:11 2011] Using photon index=1.80, rate=0.00287, arf fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2.arf
[Fri Oct 14 22:37:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:37:11 2011] Updating source flux to 3.8e-14
[Fri Oct 14 22:37:30 2011] Reading fit data from acisf01992/analysis//spectral/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_pl.csv
[Fri Oct 14 22:37:30 2011] Spectral fit parameter nH value = 1.38143e+21
[Fri Oct 14 22:37:30 2011] Spectral fit parameter PhoIndex value = 2.02161
[Fri Oct 14 22:37:30 2011] Failed to get F(0.3-8.0) from acisf01992/analysis//spectral/fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 22:37:30 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:37:30 2011] Using Nh = 1.4e+21, photon index=2.02, rate=0.00287, arf fullrun_ccd3_acisf01992_pi14-548_pass1_cl_src2.arf
[Fri Oct 14 22:37:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:37:30 2011] Updating source flux to 3.4e-14