[Wed Oct 26 10:29:08 2011] Detection parameters:
  Position = (958.2, 481.3) = 5 35 39.45 -69 54 57.1
  Extent = 3.4" x 2.5", rotation angle = 64 degrees
  Source counts = 34.1 +/- 7.3
  Background counts = 18.9
  Rate = 0.0006 +/- 0.0001

[Wed Oct 26 10:29:08 2011] Off-axis axis estimate = 9.27'
[Wed Oct 26 10:30:16 2011] Using EEF radius (= 3.80 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 10:30:16 2011] Initial guess for spatial extent in simple fitting = 3.80"
[Wed Oct 26 10:30:16 2011] source mask rpix=7.7, npix_max = 270, mask sum = 272, frac = 1.005
[Wed Oct 26 10:30:16 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.80"
[Wed Oct 26 10:30:16 2011] fullrun_ccd3_acisf01991_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 26 10:30:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01991_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 10:30:16 2011] fullrun_ccd3_acisf01991_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 26 10:30:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01991_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 10:30:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01991_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01991_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 10:30:16 2011] fullrun_ccd3_acisf01991_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 26 10:30:16 2011] fullrun_ccd3_acisf01991_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 26 10:30:16 2011] Fit fullrun_ccd3_acisf01991_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 26 10:30:26 2011] Spatial fit model total counts = 62.338000, observed total counts = 62.000000
[Wed Oct 26 10:30:26 2011] Offset between fit and detection position for source 3 = 3.265912 pixels
[Wed Oct 26 10:30:26 2011] 61.733100 total counts/ 23.457000 bgd. counts: snr = 7.902990
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.265912 pixels
  Position = (959.5, 484.3) = 5 35 39.37 -69 54 55.9
  Extent = 3.3 (2.6-4.8)", rotation angle = 0
  Source counts = 38.3 +/- 7.9
  Background counts = 23.5
  Rate = 0.0006 +/- 0.0001
[Wed Oct 26 10:30:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 10:30:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 10:30:26 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 10:30:26 2011] Source does appear to be extended
[Wed Oct 26 10:30:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 10:30:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 10:30:51 2011] Initial guess for spatial extent in simple fitting = 3.35"
[Wed Oct 26 10:30:51 2011] source mask rpix=6.8, npix_max = 213, mask sum = 225, frac = 1.055
[Wed Oct 26 10:30:51 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 3.35"
[Wed Oct 26 10:30:52 2011] fullrun_ccd3_acisf01991_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct 26 10:30:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01991_pi14-548_cl_pass1_src2.csv
[Wed Oct 26 10:30:52 2011] fullrun_ccd3_acisf01991_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct 26 10:30:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01991_pi14-548_cl_pass1_src2.csv
[Wed Oct 26 10:30:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01991_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01991_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 10:30:52 2011] fullrun_ccd3_acisf01991_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct 26 10:30:52 2011] fullrun_ccd3_acisf01991_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct 26 10:30:52 2011] Fit fullrun_ccd3_acisf01991_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct 26 10:31:00 2011] Warning, spatial fit 2 centroid is now closest to src. 4
[Wed Oct 26 10:31:00 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 10:31:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 10:31:00 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 10:31:00 2011] Source does appear to be extended
[Wed Oct 26 10:31:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 10:32:12 2011] Not overwriting source region fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_src.reg
[Wed Oct 26 10:32:12 2011] Extracting stamp from image fullrun_ccd3_acisf01991_pi14-548_cl_sm2.00.img.gz, (806, 331) - (1113, 637)
[Wed Oct 26 10:32:12 2011] Writing fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3.gif
[Wed Oct 26 10:32:19 2011] ../../acisf01991/products/events/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_src.evt and ../../acisf01991/products/events/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct 26 10:32:19 2011] Size of ../../acisf01991/products/events/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_src.evt.gz[events] = 63 counts
[Wed Oct 26 10:32:19 2011] Mean chipx,y = (150.87, 459.05)
[Wed Oct 26 10:32:19 2011] Mean tdetx,y = (4672.95, 3211.87)
[Wed Oct 26 10:32:19 2011] chipx,y range = (112.00-175.00, 429.00-493.00)
[Wed Oct 26 10:32:19 2011] Size of ../../acisf01991/products/events/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 408 counts
[Wed Oct 26 10:32:19 2011] ../../acisf01991/products/images/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_src.img and ../../acisf01991/products/images/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct 26 10:32:19 2011] Not generating rmf since there are only 38 counts
[Wed Oct 26 10:32:19 2011] arf not found, will run specextract
[Wed Oct 26 10:32:21 2011] ../../acisf01991/products/spectra/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_bkg.pi not found
[Wed Oct 26 10:32:21 2011] ../../acisf01991/products/spectra/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3.warf not found
[Wed Oct 26 10:32:21 2011] ../../acisf01991/products/spectra/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3.wrmf not found
[Wed Oct 26 10:32:21 2011] Removal of ../../acisf01991/products/spectra/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3.soff failed
[Wed Oct 26 10:32:21 2011] Failed to rename ../../acisf01991/products/spectra/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_grp.pi to ../../acisf01991/products/spectra/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_src.pi
[Wed Oct 26 10:32:26 2011] ../../acisf01991/products/lightcurves/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_src.lc and ../../acisf01991/products/lightcurves/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct 26 10:32:41 2011] No arf file found
[Wed Oct 26 10:38:26 2011] Updating aperture counts using extracted products
[Wed Oct 26 10:38:26 2011] Error reading totcts from fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_src.pi
[Wed Oct 26 10:38:26 2011] No arf file for this source, not re-computing flux
[Wed Oct 26 10:38:31 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 10:38:32 2011] acisf01991/analysis//spectral/fullrun_ccd3_acisf01991_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete