[Mon Oct 24 01:11:33 2011] Detection parameters:
  Position = (769.5, 173.5) = 4 54 53.45 -68 35 0.1
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 113.0 +/- 11.3
  Background counts = 14.0
  Rate = 0.003 +/- 0.0003

[Mon Oct 24 01:11:34 2011] Off-axis axis estimate = 6.54'
[Mon Oct 24 01:12:25 2011] Using EEF radius (= 1.92 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 01:12:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 01:12:25 2011] Initial guess for spatial extent in simple fitting = 1.92"
[Mon Oct 24 01:12:25 2011] source mask rpix=3.9, npix_max = 77, mask sum = 72, frac = 0.933
[Mon Oct 24 01:12:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.92"
[Mon Oct 24 01:12:26 2011] fullrun_ccd6_acisf01990_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 01:12:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01990_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 01:12:26 2011] fullrun_ccd6_acisf01990_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 01:12:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01990_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 01:12:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01990_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01990_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 01:12:26 2011] fullrun_ccd6_acisf01990_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 01:12:26 2011] fullrun_ccd6_acisf01990_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 01:12:26 2011] Fit fullrun_ccd6_acisf01990_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 01:12:38 2011] Spatial fit model total counts = 148.296000, observed total counts = 145.000000
[Mon Oct 24 01:12:38 2011] Offset between fit and detection position for source 2 = 0.304601 pixels
[Mon Oct 24 01:12:38 2011] 146.901700 total counts/ 33.396700 bgd. counts: snr = 19.640983
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.304601 pixels
  Position = (769.7, 173.2) = 4 54 53.48 -68 35 0.4
  Extent = 2.1 (1.6-2.2)", rotation angle = 0
  Source counts = 113.5 +/- 12.1
  Background counts = 33.4
  Rate = 0.003 +/- 0.0003
[Mon Oct 24 01:12:38 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 01:12:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 01:12:38 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 01:12:38 2011] Source does appear to be extended
[Mon Oct 24 01:12:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 01:13:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 01:13:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 01:13:09 2011] Initial guess for spatial extent in simple fitting = 2.09"
[Mon Oct 24 01:13:09 2011] source mask rpix=4.2, npix_max = 90, mask sum = 80, frac = 0.888
[Mon Oct 24 01:13:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.09"
[Mon Oct 24 01:13:10 2011] fullrun_ccd6_acisf01990_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 01:13:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01990_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 01:13:10 2011] fullrun_ccd6_acisf01990_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 01:13:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01990_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 01:13:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01990_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01990_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 01:13:10 2011] fullrun_ccd6_acisf01990_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 01:13:10 2011] fullrun_ccd6_acisf01990_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 01:13:10 2011] Fit fullrun_ccd6_acisf01990_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 01:13:22 2011] Spatial fit model total counts = 149.409000, observed total counts = 148.000000
[Mon Oct 24 01:13:22 2011] Offset between fit and detection position for source 2 = 0.288185 pixels
[Mon Oct 24 01:13:22 2011] 148.602600 total counts/ 33.651600 bgd. counts: snr = 19.815722
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.288185 pixels
  Position = (769.5, 173.0) = 4 54 53.49 -68 35 0.6
  Extent = 2.1 (1.8-2.5)", rotation angle = 0
  Source counts = 115.0 +/- 12.2
  Background counts = 33.7
  Rate = 0.003 +/- 0.0003
[Mon Oct 24 01:13:22 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 01:13:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 01:13:22 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 01:13:22 2011] Source does appear to be extended
[Mon Oct 24 01:13:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 01:14:17 2011] Not overwriting source region fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 24 01:14:17 2011] Extracting stamp from image fullrun_ccd6_acisf01990_pi14-548_cl_sm2.00.img.gz, (672, 75) - (867, 271)
[Mon Oct 24 01:14:17 2011] Writing fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2.gif
[Mon Oct 24 01:14:18 2011] ../../acisf01990/products/events/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_src.evt and ../../acisf01990/products/events/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 24 01:14:18 2011] Size of ../../acisf01990/products/events/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_src.evt.gz[events] = 138 counts
[Mon Oct 24 01:14:18 2011] Mean chipx,y = (604.62, 969.65)
[Mon Oct 24 01:14:18 2011] Mean tdetx,y = (3479.62, 2671.65)
[Mon Oct 24 01:14:18 2011] chipx,y range = (582.00-628.00, 943.00-1001.00)
[Mon Oct 24 01:14:18 2011] Size of ../../acisf01990/products/events/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 104 counts
[Mon Oct 24 01:14:18 2011] ../../acisf01990/products/images/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_src.img and ../../acisf01990/products/images/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 24 01:14:18 2011] ../../acisf01990/products/spectra/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_src.pi and ../../acisf01990/products/spectra/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 24 01:14:21 2011] ../../acisf01990/products/lightcurves/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_src.lc and ../../acisf01990/products/lightcurves/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 24 01:15:11 2011] Keeping rmf generated by specextract
[Mon Oct 24 01:15:12 2011] 178.237
[Mon Oct 24 01:17:27 2011] Updating aperture counts using extracted products
[Mon Oct 24 01:17:27 2011] Error reading totcts from fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 24 01:17:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 01:17:27 2011] Using photon index=1.80, rate=0.00298, arf fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 01:17:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 01:17:27 2011] Updating source flux to 3.5e-14
[Mon Oct 24 01:17:38 2011] Reading fit data from acisf01990/analysis//spectral/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_pl.csv
[Mon Oct 24 01:17:38 2011] Spectral fit parameter nH value = 1.3539e+22
[Mon Oct 24 01:17:38 2011] Spectral fit parameter PhoIndex value = 2.69035
[Mon Oct 24 01:17:38 2011] Failed to get F(0.3-8.0) from acisf01990/analysis//spectral/fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 01:17:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 01:17:38 2011] Using Nh = 1.4e+22, photon index=2.69, rate=0.00298, arf fullrun_ccd6_acisf01990_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 01:17:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 01:17:38 2011] Updating source flux to 3.7e-14