[Thu Sep 29 07:30:48 2011] Detection parameters:
  Position = (626.4, 1272.0) = 19 4 8.33 5 31 45.4
  Extent = 0.5" x 0.5", rotation angle = 48 degrees
  Source counts = 10.0 +/- 3.6
  Background counts = 3.0
  Rate = 0.0001 +/- 4e-05

[Thu Sep 29 07:30:49 2011] Off-axis axis estimate = 2.96'
[Thu Sep 29 07:32:33 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 07:32:33 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Thu Sep 29 07:32:33 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.084
[Thu Sep 29 07:32:33 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 0.57"
[Thu Sep 29 07:32:35 2011] fullrun_ccd7_acisf01988_pi14-548_cl_pass0_src32.ximg exists
[Thu Sep 29 07:32:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01988_pi14-548_cl_pass0_src32.csv
[Thu Sep 29 07:32:35 2011] fullrun_ccd7_acisf01988_pi14-548_cl_pass0_src32_1.ximg exists
[Thu Sep 29 07:32:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01988_pi14-548_cl_pass0_src32.csv
[Thu Sep 29 07:32:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01988_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01988_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 07:32:35 2011] fullrun_ccd7_acisf01988_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Thu Sep 29 07:32:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01988_pi14-548_cl_pass0_tfrozen_src32.csv
[Thu Sep 29 07:32:35 2011] fullrun_ccd7_acisf01988_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Thu Sep 29 07:32:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01988_pi14-548_cl_pass0_tfrozen_src32.csv
[Thu Sep 29 07:32:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01988_pi14-548_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01988_pi14-548_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 07:32:50 2011] Spatial fit model total counts = 24.978700, observed total counts = 27.000000
[Thu Sep 29 07:32:50 2011] Offset between fit and detection position for source 30 = 6.379588 pixels
[Thu Sep 29 07:32:50 2011] 25.436310 total counts/ 19.581700 bgd. counts: snr = 1.323039
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 6.379588 pixels
  Position = (622.2, 1276.8) = 19 4 8.48 5 31 47.5
  Extent = 1.5" x 1.5", rotation angle = -0
  Source counts = 5.9 +/- 5.0
  Background counts = 19.6
  Rate = 6e-05 +/- 5e-05
  Deleting source due to low Poisson probability