[Fri Sep 23 19:01:51 2011] Detection parameters:
  Position = (1347.8, 640.3) = 18 52 38.58 0 40 19.7
  Extent = 0.5" x 0.5", rotation angle = 123 degrees
  Source counts = 720.9 +/- 27.2
  Background counts = 19.1
  Rate = 0.02 +/- 0.0009

[Fri Sep 23 19:01:54 2011] Off-axis axis estimate = 0.49'
[Fri Sep 23 19:03:06 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:03:06 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Sep 23 19:03:06 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.889
[Fri Sep 23 19:03:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Fri Sep 23 19:03:07 2011] fullrun_ccd3_acisf01982_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 19:03:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01982_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 19:03:07 2011] fullrun_ccd3_acisf01982_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 19:03:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01982_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 19:03:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01982_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01982_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:03:08 2011] fullrun_ccd3_acisf01982_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 19:03:08 2011] fullrun_ccd3_acisf01982_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 19:03:08 2011] Fit fullrun_ccd3_acisf01982_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 19:03:24 2011] Spatial fit model total counts = 748.004000, observed total counts = 748.000000
[Fri Sep 23 19:03:24 2011] Offset between fit and detection position for source 30 = 0.725676 pixels
[Fri Sep 23 19:03:24 2011] 748.014900 total counts/ 57.836900 bgd. counts: snr = 90.752502
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.725676 pixels
  Position = (1348.3, 640.8) = 18 52 38.58 0 40 19.7
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 690.2 +/- 27.3
  Background counts = 57.8
  Rate = 0.02 +/- 0.0009
[Fri Sep 23 19:03:24 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:03:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:03:24 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:03:24 2011] Source does appear to be extended
[Fri Sep 23 19:03:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:03:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:03:49 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Sep 23 19:03:49 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.223
[Fri Sep 23 19:03:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.42"
[Fri Sep 23 19:03:49 2011] fullrun_ccd3_acisf01982_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 19:03:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01982_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 19:03:49 2011] fullrun_ccd3_acisf01982_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 19:03:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01982_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 19:03:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01982_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01982_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:03:51 2011] fullrun_ccd3_acisf01982_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 19:03:51 2011] fullrun_ccd3_acisf01982_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 19:03:51 2011] Fit fullrun_ccd3_acisf01982_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 19:04:01 2011] Warning, spatial fit 1 centroid is now closest to src. 15
[Fri Sep 23 19:04:01 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:04:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:04:01 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:04:01 2011] Source does appear to be extended
[Fri Sep 23 19:04:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:07:15 2011] Not overwriting source region fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_src.reg
[Fri Sep 23 19:07:15 2011] Extracting stamp from image fullrun_ccd3_acisf01982_pi14-548_cl_sm2.00.img.gz, (1329, 622) - (1368, 660)
[Fri Sep 23 19:07:15 2011] Writing fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30.gif
[Fri Sep 23 19:07:16 2011] ../../acisf01982/products/events/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_src.evt and ../../acisf01982/products/events/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri Sep 23 19:07:16 2011] Size of ../../acisf01982/products/events/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_src.evt.gz[events] = 706 counts
[Fri Sep 23 19:07:16 2011] Mean chipx,y = (991.69, 941.45)
[Fri Sep 23 19:07:16 2011] Mean tdetx,y = (4190.55, 4052.69)
[Fri Sep 23 19:07:16 2011] chipx,y range = (974.00-1010.00, 923.00-959.00)
[Fri Sep 23 19:07:16 2011] Size of ../../acisf01982/products/events/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 59 counts
[Fri Sep 23 19:07:16 2011] ../../acisf01982/products/images/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_src.img and ../../acisf01982/products/images/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri Sep 23 19:07:16 2011] rmf not found, will run specextract
[Fri Sep 23 19:07:16 2011] arf not found, will run specextract
[Fri Sep 23 19:07:18 2011] ../../acisf01982/products/spectra/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_bkg.pi not found
[Fri Sep 23 19:07:18 2011] ../../acisf01982/products/spectra/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30.warf not found
[Fri Sep 23 19:07:18 2011] ../../acisf01982/products/spectra/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30.wrmf not found
[Fri Sep 23 19:07:18 2011] Removal of ../../acisf01982/products/spectra/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30.soff failed
[Fri Sep 23 19:07:18 2011] Failed to rename ../../acisf01982/products/spectra/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_grp.pi to ../../acisf01982/products/spectra/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_src.pi
[Fri Sep 23 19:07:23 2011] ../../acisf01982/products/lightcurves/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_src.lc and ../../acisf01982/products/lightcurves/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri Sep 23 19:09:59 2011] No arf file found
[Fri Sep 23 19:10:28 2011] Updating aperture counts using extracted products
[Fri Sep 23 19:10:28 2011] Error reading totcts from fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_src.pi
[Fri Sep 23 19:10:28 2011] No arf file for this source, not re-computing flux
[Fri Sep 23 19:10:37 2011] Source 30 has no response, skipping
[Fri Sep 23 19:10:38 2011] acisf01982/analysis//spectral/fullrun_ccd3_acisf01982_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete