[Thu Oct 20 18:49:08 2011] Detection parameters:
  Position = (864.2, 341.4) = 11 46 54.99 47 18 33.5
  Extent = 7.6" x 6.2", rotation angle = 156 degrees
  Source counts = 158.5 +/- 16.6
  Background counts = 117.5
  Rate = 0.006 +/- 0.0006

[Thu Oct 20 18:49:08 2011] Off-axis axis estimate = 13.07'
[Thu Oct 20 18:50:00 2011] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 18:50:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 18:50:00 2011] Initial guess for spatial extent in simple fitting = 7.67"
[Thu Oct 20 18:50:00 2011] source mask rpix=15.6, npix_max = 1034, mask sum = 1024, frac = 0.989
[Thu Oct 20 18:50:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.67"
[Thu Oct 20 18:50:00 2011] fullrun_ccd2_acisf01972_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 18:50:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01972_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 18:50:01 2011] fullrun_ccd2_acisf01972_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 18:50:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01972_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 18:50:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01972_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01972_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 18:50:01 2011] fullrun_ccd2_acisf01972_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 18:50:01 2011] fullrun_ccd2_acisf01972_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 18:50:01 2011] Fit fullrun_ccd2_acisf01972_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 18:50:10 2011] Spatial fit model total counts = 356.859000, observed total counts = 362.000000
[Thu Oct 20 18:50:10 2011] Offset between fit and detection position for source 3 = 1.087791 pixels
[Thu Oct 20 18:50:10 2011] 356.491000 total counts/ 132.192000 bgd. counts: snr = 19.508539
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.087791 pixels
  Position = (864.1, 342.4) = 11 46 55.02 47 18 33.8
  Extent = 8.5 (7.3-9.8)", rotation angle = 0
  Source counts = 224.3 +/- 18.9
  Background counts = 132.2
  Rate = 0.008 +/- 0.0007
[Thu Oct 20 18:50:10 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 18:50:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 18:50:10 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 18:50:10 2011] Source does appear to be extended
[Thu Oct 20 18:50:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 18:50:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 18:50:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 18:50:31 2011] Initial guess for spatial extent in simple fitting = 8.51"
[Thu Oct 20 18:50:31 2011] source mask rpix=17.3, npix_max = 1266, mask sum = 1260, frac = 0.995
[Thu Oct 20 18:50:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.51"
[Thu Oct 20 18:50:32 2011] fullrun_ccd2_acisf01972_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 18:50:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01972_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 18:50:32 2011] fullrun_ccd2_acisf01972_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 18:50:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01972_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 18:50:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01972_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01972_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 18:50:32 2011] fullrun_ccd2_acisf01972_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 18:50:32 2011] fullrun_ccd2_acisf01972_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 18:50:32 2011] Fit fullrun_ccd2_acisf01972_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 18:50:38 2011] Spatial fit model total counts = 383.083000, observed total counts = 388.000000
[Thu Oct 20 18:50:38 2011] Offset between fit and detection position for source 3 = 0.773906 pixels
[Thu Oct 20 18:50:38 2011] 383.071000 total counts/ 151.830000 bgd. counts: snr = 18.766619
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.773906 pixels
  Position = (863.7, 341.8) = 11 46 55.04 47 18 33.5
  Extent = 8.7 (7.6-10.0)", rotation angle = 0
  Source counts = 231.2 +/- 19.6
  Background counts = 151.8
  Rate = 0.008 +/- 0.0007
[Thu Oct 20 18:50:38 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 18:50:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 18:50:38 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 18:50:38 2011] Source does appear to be extended
[Thu Oct 20 18:50:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 18:51:00 2011] Not overwriting source region fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_src.reg
[Thu Oct 20 18:51:00 2011] Extracting stamp from image fullrun_ccd2_acisf01972_pi14-548_cl_sm2.00.img.gz, (465, 0) - (1263, 741)
[Thu Oct 20 18:51:00 2011] Writing fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3.gif
[Thu Oct 20 18:51:00 2011] ../../acisf01972/products/events/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_src.evt and ../../acisf01972/products/events/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Oct 20 18:51:01 2011] Size of ../../acisf01972/products/events/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_src.evt.gz[events] = 361 counts
[Thu Oct 20 18:51:01 2011] Mean chipx,y = (289.33, 835.12)
[Thu Oct 20 18:51:01 2011] Mean tdetx,y = (3896.12, 3796.67)
[Thu Oct 20 18:51:01 2011] chipx,y range = (214.00-365.00, 756.00-903.00)
[Thu Oct 20 18:51:01 2011] Size of ../../acisf01972/products/events/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1124 counts
[Thu Oct 20 18:51:01 2011] ../../acisf01972/products/images/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_src.img and ../../acisf01972/products/images/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Oct 20 18:51:01 2011] ../../acisf01972/products/spectra/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_src.pi and ../../acisf01972/products/spectra/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Oct 20 18:51:04 2011] ../../acisf01972/products/lightcurves/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_src.lc and ../../acisf01972/products/lightcurves/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Oct 20 18:51:11 2011] Keeping rmf generated by specextract
[Thu Oct 20 18:51:11 2011] 151.585
[Thu Oct 20 18:54:57 2011] Updating aperture counts using extracted products
[Thu Oct 20 18:54:57 2011] Error reading totcts from fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Oct 20 18:54:57 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 18:54:57 2011] Using photon index=1.80, rate=0.00805, arf fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3.arf
[Thu Oct 20 18:54:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 18:54:57 2011] Updating source flux to 1.1e-13
[Thu Oct 20 18:55:09 2011] Reading fit data from acisf01972/analysis//spectral/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_pl.csv
[Thu Oct 20 18:55:09 2011] Spectral fit parameter nH value = 2.06663e+21
[Thu Oct 20 18:55:09 2011] Spectral fit parameter PhoIndex value = 1.71295
[Thu Oct 20 18:55:09 2011] Failed to get F(0.3-8.0) from acisf01972/analysis//spectral/fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Oct 20 18:55:09 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 18:55:09 2011] Using Nh = 2.1e+21, photon index=1.71, rate=0.00805, arf fullrun_ccd2_acisf01972_pi14-548_pass1_cl_src3.arf
[Thu Oct 20 18:55:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 18:55:09 2011] Updating source flux to 1.1e-13