[Tue Nov  1 06:24:09 2011] Detection parameters:
  Position = (730.3, 721.4) = 11 45 53.85 47 36 45.9
  Extent = 2.3" x 1.6", rotation angle = 120 degrees
  Source counts = 606.6 +/- 25.6
  Background counts = 47.4
  Rate = 0.02 +/- 0.0009

[Tue Nov  1 06:24:10 2011] Off-axis axis estimate = 7.54'
[Tue Nov  1 06:25:15 2011] Using EEF radius (= 2.52 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 06:25:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 06:25:15 2011] Initial guess for spatial extent in simple fitting = 2.52"
[Tue Nov  1 06:25:15 2011] source mask rpix=5.1, npix_max = 126, mask sum = 121, frac = 0.958
[Tue Nov  1 06:25:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.52"
[Tue Nov  1 06:25:16 2011] fullrun_ccd6_acisf01971_pi14-548_cl_pass0_src1.ximg exists
[Tue Nov  1 06:25:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01971_pi14-548_cl_pass0_src1.csv
[Tue Nov  1 06:25:16 2011] fullrun_ccd6_acisf01971_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Nov  1 06:25:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01971_pi14-548_cl_pass0_src1.csv
[Tue Nov  1 06:25:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01971_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01971_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:25:16 2011] fullrun_ccd6_acisf01971_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Nov  1 06:25:16 2011] fullrun_ccd6_acisf01971_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Nov  1 06:25:16 2011] Fit fullrun_ccd6_acisf01971_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Nov  1 06:25:25 2011] Spatial fit model total counts = 659.946000, observed total counts = 660.000000
[Tue Nov  1 06:25:25 2011] Offset between fit and detection position for source 1 = 0.613547 pixels
[Tue Nov  1 06:25:25 2011] 659.146500 total counts/ 45.719500 bgd. counts: snr = 90.721903
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.613547 pixels
  Position = (730.5, 722.0) = 11 45 53.86 47 36 46.0
  Extent = 3.1 (2.9-3.3)", rotation angle = 0
  Source counts = 613.4 +/- 25.7
  Background counts = 45.7
  Rate = 0.02 +/- 0.0009
[Tue Nov  1 06:25:25 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:25:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:25:25 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:25:25 2011] Source does appear to be extended
[Tue Nov  1 06:25:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 06:25:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 06:25:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 06:25:48 2011] Initial guess for spatial extent in simple fitting = 3.08"
[Tue Nov  1 06:25:48 2011] source mask rpix=6.3, npix_max = 183, mask sum = 182, frac = 0.993
[Tue Nov  1 06:25:48 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.08"
[Tue Nov  1 06:25:48 2011] fullrun_ccd6_acisf01971_pi14-548_cl_pass1_src1.ximg exists
[Tue Nov  1 06:25:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01971_pi14-548_cl_pass1_src1.csv
[Tue Nov  1 06:25:48 2011] fullrun_ccd6_acisf01971_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Nov  1 06:25:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01971_pi14-548_cl_pass1_src1.csv
[Tue Nov  1 06:25:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01971_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01971_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:25:48 2011] fullrun_ccd6_acisf01971_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Nov  1 06:25:48 2011] fullrun_ccd6_acisf01971_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Nov  1 06:25:48 2011] Fit fullrun_ccd6_acisf01971_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Nov  1 06:25:56 2011] Spatial fit model total counts = 667.991000, observed total counts = 668.000000
[Tue Nov  1 06:25:56 2011] Offset between fit and detection position for source 1 = 0.301131 pixels
[Tue Nov  1 06:25:56 2011] 667.754100 total counts/ 36.299100 bgd. counts: snr = 104.808011
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.301131 pixels
  Position = (730.6, 721.7) = 11 45 53.86 47 36 45.8
  Extent = 3.2 (3.0-3.4)", rotation angle = 0
  Source counts = 631.5 +/- 25.8
  Background counts = 36.3
  Rate = 0.02 +/- 0.0009
[Tue Nov  1 06:25:56 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:25:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:25:56 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:25:56 2011] Source does appear to be extended
[Tue Nov  1 06:25:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 06:27:02 2011] Not overwriting source region fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_src.reg
[Tue Nov  1 06:27:02 2011] Extracting stamp from image fullrun_ccd6_acisf01971_pi14-548_cl_sm2.00.img.gz, (586, 578) - (875, 866)
[Tue Nov  1 06:27:02 2011] Writing fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1.gif
[Tue Nov  1 06:27:03 2011] ../../acisf01971/products/events/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_src.evt and ../../acisf01971/products/events/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Nov  1 06:27:03 2011] Size of ../../acisf01971/products/events/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_src.evt.gz[events] = 662 counts
[Tue Nov  1 06:27:03 2011] Mean chipx,y = (349.17, 376.69)
[Tue Nov  1 06:27:03 2011] Mean tdetx,y = (3224.17, 2078.69)
[Tue Nov  1 06:27:03 2011] chipx,y range = (317.00-387.00, 342.00-408.00)
[Tue Nov  1 06:27:03 2011] Size of ../../acisf01971/products/events/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 159 counts
[Tue Nov  1 06:27:03 2011] ../../acisf01971/products/images/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_src.img and ../../acisf01971/products/images/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Nov  1 06:27:03 2011] ../../acisf01971/products/spectra/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_src.pi and ../../acisf01971/products/spectra/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Nov  1 06:27:06 2011] ../../acisf01971/products/lightcurves/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_src.lc and ../../acisf01971/products/lightcurves/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Nov  1 06:27:51 2011] Keeping rmf generated by specextract
[Tue Nov  1 06:27:51 2011] 189.473
[Tue Nov  1 06:30:47 2011] Updating aperture counts using extracted products
[Tue Nov  1 06:30:47 2011] Error reading totcts from fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Nov  1 06:30:47 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 06:30:47 2011] Using photon index=1.80, rate=0.0216, arf fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1.arf
[Tue Nov  1 06:30:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 06:30:47 2011] Updating source flux to 2.2e-13
[Tue Nov  1 06:31:12 2011] Reading fit data from acisf01971/analysis//spectral/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_pl.csv
[Tue Nov  1 06:31:12 2011] Spectral fit parameter nH value = 2.03981e+12
[Tue Nov  1 06:31:12 2011] Spectral fit parameter PhoIndex value = 1.87293
[Tue Nov  1 06:31:12 2011] Failed to get F(0.3-8.0) from acisf01971/analysis//spectral/fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Nov  1 06:31:12 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 06:31:12 2011] Using Nh = 2e+12, photon index=1.87, rate=0.0216, arf fullrun_ccd6_acisf01971_pi14-548_pass1_cl_src1.arf
[Tue Nov  1 06:31:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 06:31:13 2011] Updating source flux to 2.2e-13