[Tue Nov  1 06:24:08 2011] Detection parameters:
  Position = (949.4, 689.2) = 11 46 56.66 47 27 54.3
  Extent = 2.7" x 2.0", rotation angle = 160 degrees
  Source counts = 575.4 +/- 24.7
  Background counts = 36.6
  Rate = 0.02 +/- 0.0008

[Tue Nov  1 06:24:08 2011] Off-axis axis estimate = 8.67'
[Tue Nov  1 06:25:14 2011] Using EEF radius (= 3.32 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 06:25:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 06:25:14 2011] Initial guess for spatial extent in simple fitting = 3.32"
[Tue Nov  1 06:25:14 2011] source mask rpix=6.7, npix_max = 210, mask sum = 210, frac = 1.000
[Tue Nov  1 06:25:14 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.32"
[Tue Nov  1 06:25:15 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src1.ximg exists
[Tue Nov  1 06:25:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src1.csv
[Tue Nov  1 06:25:15 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Nov  1 06:25:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src1.csv
[Tue Nov  1 06:25:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:25:15 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Nov  1 06:25:15 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Nov  1 06:25:15 2011] Fit fullrun_ccd3_acisf01971_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Nov  1 06:25:23 2011] Spatial fit model total counts = 634.562000, observed total counts = 636.000000
[Tue Nov  1 06:25:23 2011] Offset between fit and detection position for source 7 = 0.645748 pixels
[Tue Nov  1 06:25:23 2011] 634.722200 total counts/ 35.996200 bgd. counts: snr = 99.792934
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.645748 pixels
  Position = (949.4, 689.9) = 11 46 56.68 47 27 54.4
  Extent = 3.1 (2.9-3.3)", rotation angle = 0
  Source counts = 598.7 +/- 25.2
  Background counts = 36.0
  Rate = 0.02 +/- 0.0009
[Tue Nov  1 06:25:23 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:25:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:25:23 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:25:23 2011] Source does appear to be extended
[Tue Nov  1 06:25:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 06:25:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 06:25:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 06:25:46 2011] Initial guess for spatial extent in simple fitting = 3.09"
[Tue Nov  1 06:25:46 2011] source mask rpix=6.3, npix_max = 184, mask sum = 182, frac = 0.987
[Tue Nov  1 06:25:46 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.09"
[Tue Nov  1 06:25:46 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src1.ximg exists
[Tue Nov  1 06:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src1.csv
[Tue Nov  1 06:25:46 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Nov  1 06:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src1.csv
[Tue Nov  1 06:25:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:25:46 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Nov  1 06:25:46 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Nov  1 06:25:46 2011] Fit fullrun_ccd3_acisf01971_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Nov  1 06:25:54 2011] Spatial fit model total counts = 632.512000, observed total counts = 634.000000
[Tue Nov  1 06:25:54 2011] Offset between fit and detection position for source 7 = 0.024545 pixels
[Tue Nov  1 06:25:54 2011] 632.532800 total counts/ 38.193800 bgd. counts: snr = 96.169597
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.024545 pixels
  Position = (949.5, 689.9) = 11 46 56.68 47 27 54.4
  Extent = 3.1 (2.9-3.2)", rotation angle = 0
  Source counts = 594.3 +/- 25.2
  Background counts = 38.2
  Rate = 0.02 +/- 0.0009
[Tue Nov  1 06:25:54 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:25:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:25:54 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:25:54 2011] Source does appear to be extended
[Tue Nov  1 06:25:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 06:26:30 2011] Not overwriting source region fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_src.reg
[Tue Nov  1 06:26:30 2011] Extracting stamp from image fullrun_ccd3_acisf01971_pi14-548_cl_sm2.00.img.gz, (810, 550) - (1089, 830)
[Tue Nov  1 06:26:30 2011] Writing fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7.gif
[Tue Nov  1 06:26:31 2011] ../../acisf01971/products/events/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_src.evt and ../../acisf01971/products/events/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Tue Nov  1 06:26:31 2011] Size of ../../acisf01971/products/events/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_src.evt.gz[events] = 627 counts
[Tue Nov  1 06:26:31 2011] Mean chipx,y = (166.44, 674.04)
[Tue Nov  1 06:26:31 2011] Mean tdetx,y = (4457.96, 3227.44)
[Tue Nov  1 06:26:31 2011] chipx,y range = (129.00-205.00, 644.00-705.00)
[Tue Nov  1 06:26:31 2011] Size of ../../acisf01971/products/events/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 173 counts
[Tue Nov  1 06:26:31 2011] ../../acisf01971/products/images/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_src.img and ../../acisf01971/products/images/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Tue Nov  1 06:26:31 2011] ../../acisf01971/products/spectra/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_src.pi and ../../acisf01971/products/spectra/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Tue Nov  1 06:26:34 2011] ../../acisf01971/products/lightcurves/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_src.lc and ../../acisf01971/products/lightcurves/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Tue Nov  1 06:26:54 2011] Keeping rmf generated by specextract
[Tue Nov  1 06:26:54 2011] 172.325
[Tue Nov  1 06:30:46 2011] Updating aperture counts using extracted products
[Tue Nov  1 06:30:46 2011] Error reading totcts from fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_src.pi.gz
[Tue Nov  1 06:30:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 06:30:46 2011] Using photon index=1.80, rate=0.0204, arf fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7.arf
[Tue Nov  1 06:30:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 06:30:46 2011] Updating source flux to 2.5e-13
[Tue Nov  1 06:31:07 2011] Reading fit data from acisf01971/analysis//spectral/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_pl.csv
[Tue Nov  1 06:31:07 2011] Spectral fit parameter nH value = 7.54546e+12
[Tue Nov  1 06:31:07 2011] Spectral fit parameter PhoIndex value = 2.2372
[Tue Nov  1 06:31:07 2011] Failed to get F(0.3-8.0) from acisf01971/analysis//spectral/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Tue Nov  1 06:31:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 06:31:07 2011] Using Nh = 7.5e+12, photon index=2.24, rate=0.0204, arf fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src7.arf
[Tue Nov  1 06:31:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 06:31:07 2011] Updating source flux to 2.5e-13