[Tue Nov  1 06:24:07 2011] Detection parameters:
  Position = (1061.9, 970.7) = 11 46 51.24 47 30 12.9
  Extent = 2.1" x 0.9", rotation angle = 140 degrees
  Source counts = 49.2 +/- 7.3
  Background counts = 4.8
  Rate = 0.002 +/- 0.0003

[Tue Nov  1 06:24:08 2011] Off-axis axis estimate = 7.63'
[Tue Nov  1 06:25:14 2011] Using EEF radius (= 2.58 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 06:25:14 2011] Initial guess for spatial extent in simple fitting = 2.58"
[Tue Nov  1 06:25:14 2011] source mask rpix=5.2, npix_max = 131, mask sum = 132, frac = 1.003
[Tue Nov  1 06:25:14 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.58"
[Tue Nov  1 06:25:15 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src2.ximg exists
[Tue Nov  1 06:25:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src2.csv
[Tue Nov  1 06:25:15 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Nov  1 06:25:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src2.csv
[Tue Nov  1 06:25:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01971_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:25:15 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Nov  1 06:25:15 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Nov  1 06:25:15 2011] Fit fullrun_ccd3_acisf01971_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Nov  1 06:25:23 2011] Spatial fit model total counts = 63.577400, observed total counts = 64.000000
[Tue Nov  1 06:25:23 2011] Offset between fit and detection position for source 2 = 0.837043 pixels
[Tue Nov  1 06:25:23 2011] 63.542500 total counts/ 14.192600 bgd. counts: snr = 13.099517
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.837043 pixels
  Position = (1061.6, 971.5) = 11 46 51.27 47 30 13.1
  Extent = 2.0 (1.3-2.7)", rotation angle = 0
  Source counts = 49.3 +/- 8.0
  Background counts = 14.2
  Rate = 0.002 +/- 0.0003
[Tue Nov  1 06:25:23 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:25:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:25:23 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:25:23 2011] Source does appear to be extended
[Tue Nov  1 06:25:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 06:25:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 06:25:46 2011] Initial guess for spatial extent in simple fitting = 2.03"
[Tue Nov  1 06:25:46 2011] source mask rpix=4.1, npix_max = 85, mask sum = 81, frac = 0.950
[Tue Nov  1 06:25:46 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.03"
[Tue Nov  1 06:25:46 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src2.ximg exists
[Tue Nov  1 06:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src2.csv
[Tue Nov  1 06:25:46 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Nov  1 06:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src2.csv
[Tue Nov  1 06:25:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01971_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:25:46 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Nov  1 06:25:46 2011] fullrun_ccd3_acisf01971_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Nov  1 06:25:46 2011] Fit fullrun_ccd3_acisf01971_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Nov  1 06:25:54 2011] Spatial fit model total counts = 59.961100, observed total counts = 60.000000
[Tue Nov  1 06:25:54 2011] Offset between fit and detection position for source 2 = 0.970358 pixels
[Tue Nov  1 06:25:54 2011] 59.854900 total counts/ 23.138600 bgd. counts: snr = 7.632914
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.970358 pixels
  Position = (1060.9, 972.2) = 11 46 51.31 47 30 13.4
  Extent = 1.5 (1.1-1.9)", rotation angle = 0
  Source counts = 36.7 +/- 7.7
  Background counts = 23.1
  Rate = 0.001 +/- 0.0003
[Tue Nov  1 06:25:54 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:25:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:25:54 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:25:54 2011] Source does appear to be extended
[Tue Nov  1 06:25:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 06:26:30 2011] Not overwriting source region fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_src.reg
[Tue Nov  1 06:26:30 2011] Extracting stamp from image fullrun_ccd3_acisf01971_pi14-548_cl_sm2.00.img.gz, (991, 902) - (1131, 1042)
[Tue Nov  1 06:26:30 2011] Writing fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2.gif
[Tue Nov  1 06:26:34 2011] ../../acisf01971/products/events/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_src.evt and ../../acisf01971/products/events/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Nov  1 06:26:35 2011] Size of ../../acisf01971/products/events/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_src.evt.gz[events] = 56 counts
[Tue Nov  1 06:26:35 2011] Mean chipx,y = (92.07, 966.05)
[Tue Nov  1 06:26:35 2011] Mean tdetx,y = (4165.95, 3153.07)
[Tue Nov  1 06:26:35 2011] chipx,y range = (67.00-110.00, 947.00-989.00)
[Tue Nov  1 06:26:35 2011] Size of ../../acisf01971/products/events/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 43 counts
[Tue Nov  1 06:26:35 2011] ../../acisf01971/products/images/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_src.img and ../../acisf01971/products/images/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Nov  1 06:26:35 2011] ../../acisf01971/products/spectra/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_src.pi and ../../acisf01971/products/spectra/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Nov  1 06:26:35 2011] Not generating rmf since there are only 36 counts
[Tue Nov  1 06:26:38 2011] ../../acisf01971/products/lightcurves/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_src.lc and ../../acisf01971/products/lightcurves/fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Nov  1 06:26:54 2011] 176.464
[Tue Nov  1 06:30:46 2011] Updating aperture counts using extracted products
[Tue Nov  1 06:30:46 2011] Error reading totcts from fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Nov  1 06:30:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 06:30:46 2011] Using photon index=1.80, rate=0.00126, arf fullrun_ccd3_acisf01971_pi14-548_pass1_cl_src2.arf
[Tue Nov  1 06:30:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 06:30:47 2011] Updating source flux to 1.5e-14
[Tue Nov  1 06:30:55 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting