[Fri Oct 28 22:02:56 2011] Detection parameters:
  Position = (717.3, 615.9) = 4 41 22.70 -2 53 59.2
  Extent = 0.6" x 0.5", rotation angle = 62 degrees
  Source counts = 569.6 +/- 24.0
  Background counts = 4.4
  Rate = 0.02 +/- 0.0009

[Fri Oct 28 22:02:56 2011] Off-axis axis estimate = 3.07'
[Fri Oct 28 22:03:39 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 22:03:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 22:03:39 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Oct 28 22:03:39 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.029
[Fri Oct 28 22:03:39 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.59"
[Fri Oct 28 22:03:40 2011] fullrun_ccd7_acisf01968_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 22:03:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01968_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 22:03:40 2011] fullrun_ccd7_acisf01968_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 22:03:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01968_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 22:03:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01968_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01968_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 22:03:40 2011] fullrun_ccd7_acisf01968_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 22:03:40 2011] fullrun_ccd7_acisf01968_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 22:03:40 2011] Fit fullrun_ccd7_acisf01968_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 22:03:49 2011] Spatial fit model total counts = 572.071000, observed total counts = 575.000000
[Fri Oct 28 22:03:49 2011] Offset between fit and detection position for source 24 = 0.718932 pixels
[Fri Oct 28 22:03:49 2011] 573.129000 total counts/ 13.009000 bgd. counts: snr = 155.295590
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.718932 pixels
  Position = (717.8, 616.4) = 4 41 22.70 -2 53 59.2
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 560.1 +/- 23.9
  Background counts = 13.0
  Rate = 0.02 +/- 0.0009
[Fri Oct 28 22:03:49 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 22:03:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 22:03:49 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 22:03:49 2011] Source does appear to be extended
[Fri Oct 28 22:03:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 22:04:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 22:04:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 22:04:09 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Fri Oct 28 22:04:09 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.854
[Fri Oct 28 22:04:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.68"
[Fri Oct 28 22:04:09 2011] fullrun_ccd7_acisf01968_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 22:04:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01968_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 22:04:09 2011] fullrun_ccd7_acisf01968_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 22:04:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01968_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 22:04:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01968_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01968_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 22:04:09 2011] fullrun_ccd7_acisf01968_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 22:04:09 2011] fullrun_ccd7_acisf01968_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 22:04:09 2011] Fit fullrun_ccd7_acisf01968_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 22:04:18 2011] Spatial fit model total counts = 575.793000, observed total counts = 576.000000
[Fri Oct 28 22:04:18 2011] Offset between fit and detection position for source 24 = 0.006987 pixels
[Fri Oct 28 22:04:18 2011] 576.727400 total counts/ 13.602400 bgd. counts: snr = 152.685233
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.006987 pixels
  Position = (717.8, 616.4) = 4 41 22.70 -2 53 59.2
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 563.1 +/- 24.0
  Background counts = 13.6
  Rate = 0.02 +/- 0.0009
[Fri Oct 28 22:04:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 22:04:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 22:04:18 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 22:04:18 2011] Source does appear to be extended
[Fri Oct 28 22:04:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 22:06:19 2011] Not overwriting source region fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_src.reg
[Fri Oct 28 22:06:19 2011] Extracting stamp from image fullrun_ccd7_acisf01968_pi14-548_cl_sm2.00.img.gz, (687, 586) - (749, 647)
[Fri Oct 28 22:06:19 2011] Writing fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24.gif
[Fri Oct 28 22:06:20 2011] ../../acisf01968/products/events/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_src.evt and ../../acisf01968/products/events/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_bgd.evt exist, delete to re-create
[Fri Oct 28 22:06:20 2011] Size of ../../acisf01968/products/events/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_src.evt.gz[events] = 570 counts
[Fri Oct 28 22:06:20 2011] Mean chipx,y = (589.79, 504.24)
[Fri Oct 28 22:06:20 2011] Mean tdetx,y = (4506.79, 2206.24)
[Fri Oct 28 22:06:20 2011] chipx,y range = (571.00-609.00, 484.00-525.00)
[Fri Oct 28 22:06:20 2011] Size of ../../acisf01968/products/events/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 23 counts
[Fri Oct 28 22:06:20 2011] ../../acisf01968/products/images/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_src.img and ../../acisf01968/products/images/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_bgd.img exist, delete to re-create
[Fri Oct 28 22:06:20 2011] ../../acisf01968/products/spectra/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_src.pi and ../../acisf01968/products/spectra/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_bgd.pi exist, delete to re-create
[Fri Oct 28 22:06:23 2011] ../../acisf01968/products/lightcurves/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_src.lc and ../../acisf01968/products/lightcurves/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_bgd.lc exist, delete to re-create
[Fri Oct 28 22:07:13 2011] Keeping rmf generated by specextract
[Fri Oct 28 22:07:13 2011] 234.827
[Fri Oct 28 22:07:18 2011] Updating aperture counts using extracted products
[Fri Oct 28 22:07:18 2011] Error reading totcts from fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_src.pi.gz
[Fri Oct 28 22:07:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 22:07:18 2011] Using photon index=1.80, rate=0.0213, arf fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24.arf
[Fri Oct 28 22:07:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 22:07:18 2011] Updating source flux to 1.3e-13
[Fri Oct 28 22:07:46 2011] Reading fit data from acisf01968/analysis//spectral/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_pl.csv
[Fri Oct 28 22:07:46 2011] Spectral fit parameter nH value = 2.41319e+20
[Fri Oct 28 22:07:46 2011] Spectral fit parameter PhoIndex value = 1.80347
[Fri Oct 28 22:07:46 2011] Failed to get F(0.3-8.0) from acisf01968/analysis//spectral/fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 22:07:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 22:07:46 2011] Using Nh = 2.4e+20, photon index=1.80, rate=0.0213, arf fullrun_ccd7_acisf01968_pi14-548_pass1_cl_src24.arf
[Fri Oct 28 22:07:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 22:07:46 2011] Updating source flux to 1.3e-13