[Fri Oct 28 22:02:52 2011] Detection parameters:
  Position = (924.5, 465.8) = 4 41 31.16 -2 47 26.7
  Extent = 0.7" x 0.5", rotation angle = 110 degrees
  Source counts = 11.5 +/- 3.5
  Background counts = 0.5
  Rate = 0.0004 +/- 0.0001

[Fri Oct 28 22:02:53 2011] Off-axis axis estimate = 3.89'
[Fri Oct 28 22:03:38 2011] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 22:03:38 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Fri Oct 28 22:03:38 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.109
[Fri Oct 28 22:03:38 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.80"
[Fri Oct 28 22:03:39 2011] fullrun_ccd6_acisf01968_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct 28 22:03:39 2011] fullrun_ccd6_acisf01968_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct 28 22:03:39 2011] Fit fullrun_ccd6_acisf01968_pi14-548_cl_pass0_src10 appears to have run properly
[Fri Oct 28 22:03:39 2011] fullrun_ccd6_acisf01968_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct 28 22:03:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01968_pi14-548_cl_pass0_tfrozen_src10.csv
[Fri Oct 28 22:03:39 2011] fullrun_ccd6_acisf01968_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct 28 22:03:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01968_pi14-548_cl_pass0_tfrozen_src10.csv
[Fri Oct 28 22:03:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01968_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01968_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 22:03:47 2011] Spatial fit model total counts = 12.805500, observed total counts = 14.000000
[Fri Oct 28 22:03:47 2011] Offset between fit and detection position for source 11 = 0.825815 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.825815 pixels
  Position = (925.2, 466.2) = 4 41 31.16 -2 47 26.7
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 12.5 +/- 3.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri Oct 28 22:03:47 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 22:03:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 22:03:47 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 22:03:47 2011] Source does appear to be extended
[Fri Oct 28 22:03:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 22:04:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 22:04:08 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Fri Oct 28 22:04:08 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.914
[Fri Oct 28 22:04:08 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.78"
[Fri Oct 28 22:04:08 2011] fullrun_ccd6_acisf01968_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct 28 22:04:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01968_pi14-548_cl_pass1_src10.csv
[Fri Oct 28 22:04:08 2011] fullrun_ccd6_acisf01968_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct 28 22:04:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01968_pi14-548_cl_pass1_src10.csv
[Fri Oct 28 22:04:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01968_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01968_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 22:04:09 2011] fullrun_ccd6_acisf01968_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct 28 22:04:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01968_pi14-548_cl_pass1_tfrozen_src10.csv
[Fri Oct 28 22:04:09 2011] fullrun_ccd6_acisf01968_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct 28 22:04:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01968_pi14-548_cl_pass1_tfrozen_src10.csv
[Fri Oct 28 22:04:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01968_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01968_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 22:04:16 2011] Spatial fit model total counts = 12.875000, observed total counts = 14.000000
[Fri Oct 28 22:04:16 2011] Offset between fit and detection position for source 11 = 0.104739 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.104739 pixels
  Position = (925.2, 466.3) = 4 41 31.16 -2 47 26.7
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 12.4 +/- 3.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri Oct 28 22:04:16 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 22:04:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 22:04:16 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 22:04:16 2011] Source does appear to be extended
[Fri Oct 28 22:04:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 22:05:26 2011] Not overwriting source region fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_src.reg
[Fri Oct 28 22:05:26 2011] Extracting stamp from image fullrun_ccd6_acisf01968_pi14-548_cl_sm2.00.img.gz, (889, 431) - (961, 502)
[Fri Oct 28 22:05:26 2011] Writing fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11.gif
[Fri Oct 28 22:05:52 2011] ../../acisf01968/products/events/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_src.evt and ../../acisf01968/products/events/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct 28 22:05:52 2011] Size of ../../acisf01968/products/events/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_src.evt.gz[events] = 12 counts
[Fri Oct 28 22:05:52 2011] Mean chipx,y = (809.50, 386.83)
[Fri Oct 28 22:05:52 2011] Mean tdetx,y = (3684.50, 2088.83)
[Fri Oct 28 22:05:52 2011] chipx,y range = (794.00-821.00, 370.00-403.00)
[Fri Oct 28 22:05:52 2011] Size of ../../acisf01968/products/events/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 12 counts
[Fri Oct 28 22:05:52 2011] ../../acisf01968/products/images/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_src.img and ../../acisf01968/products/images/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct 28 22:05:52 2011] ../../acisf01968/products/spectra/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_src.pi and ../../acisf01968/products/spectra/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct 28 22:05:52 2011] Not generating rmf since there are only 12 counts
[Fri Oct 28 22:05:55 2011] ../../acisf01968/products/lightcurves/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_src.lc and ../../acisf01968/products/lightcurves/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct 28 22:06:19 2011] 210.502
[Fri Oct 28 22:07:17 2011] Updating aperture counts using extracted products
[Fri Oct 28 22:07:17 2011] Error reading totcts from fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct 28 22:07:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 22:07:18 2011] Using photon index=1.80, rate=0.000469, arf fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11.arf
[Fri Oct 28 22:07:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 22:07:18 2011] Updating source flux to 4.4e-15
[Fri Oct 28 22:07:39 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 22:07:40 2011] acisf01968/analysis//spectral/fullrun_ccd6_acisf01968_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete