[Mon Oct 17 08:07:50 2011] Detection parameters:
  Position = (130.1, 425.4) = 5 35 50.39 -69 17 55.6
  Extent = 1.0" x 0.8", rotation angle = 145 degrees
  Source counts = 40.0 +/- 8.1
  Background counts = 25.0
  Rate = 0.0004 +/- 8e-05

[Mon Oct 17 08:07:51 2011] Off-axis axis estimate = 2.22'
[Mon Oct 17 08:09:22 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:09:22 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Oct 17 08:09:22 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.111
[Mon Oct 17 08:09:22 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 0.45"
[Mon Oct 17 08:09:23 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src25.ximg exists
[Mon Oct 17 08:09:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src25.csv
[Mon Oct 17 08:09:23 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src25_1.ximg exists
[Mon Oct 17 08:09:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src25.csv
[Mon Oct 17 08:09:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:09:24 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Mon Oct 17 08:09:24 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Oct 17 08:09:24 2011] Fit fullrun_ccd7_acisf01967_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Mon Oct 17 08:09:42 2011] Spatial fit model total counts = 102.999000, observed total counts = 103.000000
[Mon Oct 17 08:09:42 2011] Offset between fit and detection position for source 25 = 0.442929 pixels
[Mon Oct 17 08:09:42 2011] 100.936600 total counts/ 67.255100 bgd. counts: snr = 4.107039
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.442929 pixels
  Position = (129.9, 425.8) = 5 35 50.46 -69 17 55.6
  Extent = 1.1 (0.7-1.5)", rotation angle = 0
  Source counts = 33.7 +/- 10.0
  Background counts = 67.3
  Rate = 0.0004 +/- 0.0001
[Mon Oct 17 08:09:42 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:09:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:09:42 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:09:42 2011] Source does appear to be extended
[Mon Oct 17 08:09:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:10:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:10:02 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Mon Oct 17 08:10:02 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.059
[Mon Oct 17 08:10:02 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 1.06"
[Mon Oct 17 08:10:03 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src25.ximg exists
[Mon Oct 17 08:10:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src25.csv
[Mon Oct 17 08:10:03 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src25_1.ximg exists
[Mon Oct 17 08:10:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src25.csv
[Mon Oct 17 08:10:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:10:04 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Mon Oct 17 08:10:04 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Oct 17 08:10:04 2011] Fit fullrun_ccd7_acisf01967_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Oct 17 08:10:19 2011] Spatial fit model total counts = 100.999000, observed total counts = 101.000000
[Mon Oct 17 08:10:19 2011] Offset between fit and detection position for source 25 = 0.047020 pixels
[Mon Oct 17 08:10:19 2011] 98.923500 total counts/ 67.470700 bgd. counts: snr = 3.829144
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.047020 pixels
  Position = (129.9, 425.8) = 5 35 50.46 -69 17 55.6
  Extent = 1.0 (0.7-1.8)", rotation angle = 0
  Source counts = 31.5 +/- 9.9
  Background counts = 67.5
  Rate = 0.0004 +/- 0.0001
[Mon Oct 17 08:10:19 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:10:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:10:19 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:10:19 2011] Source does appear to be extended
[Mon Oct 17 08:10:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:12:06 2011] Not overwriting source region fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_src.reg
[Mon Oct 17 08:12:06 2011] Extracting stamp from image fullrun_ccd7_acisf01967_pi14-548_cl_sm2.00.img.gz, (84, 380) - (176, 472)
[Mon Oct 17 08:12:06 2011] Writing fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25.gif
[Mon Oct 17 08:13:16 2011] ../../acisf01967/products/events/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_src.evt and ../../acisf01967/products/events/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Mon Oct 17 08:13:16 2011] Size of ../../acisf01967/products/events/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_src.evt.gz[events] = 87 counts
[Mon Oct 17 08:13:16 2011] Mean chipx,y = (80.48, 753.00)
[Mon Oct 17 08:13:16 2011] Mean tdetx,y = (3997.48, 2455.00)
[Mon Oct 17 08:13:16 2011] chipx,y range = (59.00-100.00, 730.00-773.00)
[Mon Oct 17 08:13:16 2011] Size of ../../acisf01967/products/events/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 478 counts
[Mon Oct 17 08:13:16 2011] ../../acisf01967/products/images/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_src.img and ../../acisf01967/products/images/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Mon Oct 17 08:13:16 2011] ../../acisf01967/products/spectra/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_src.pi and ../../acisf01967/products/spectra/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Mon Oct 17 08:13:16 2011] Not generating rmf since there are only 31 counts
[Mon Oct 17 08:13:18 2011] ../../acisf01967/products/lightcurves/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_src.lc and ../../acisf01967/products/lightcurves/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Mon Oct 17 08:14:35 2011] 238.02
[Mon Oct 17 08:14:40 2011] Updating aperture counts using extracted products
[Mon Oct 17 08:14:40 2011] Error reading totcts from fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25_src.pi.gz
[Mon Oct 17 08:14:40 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 08:14:40 2011] Using photon index=1.80, rate=0.000358, arf fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src25.arf
[Mon Oct 17 08:14:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 08:14:41 2011] Updating source flux to 2.8e-15
[Mon Oct 17 08:15:22 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting