[Mon Oct 17 08:07:49 2011] Detection parameters:
  Position = (612.2, 571.7) = 5 35 5.68 -69 16 43.5
  Extent = 0.6" x 0.5", rotation angle = 145 degrees
  Source counts = 44.4 +/- 7.7
  Background counts = 14.6
  Rate = 0.0004 +/- 8e-05

[Mon Oct 17 08:07:51 2011] Off-axis axis estimate = 2.61'
[Mon Oct 17 08:09:22 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:09:22 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Mon Oct 17 08:09:22 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.952
[Mon Oct 17 08:09:22 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.51"
[Mon Oct 17 08:09:23 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src23.ximg exists
[Mon Oct 17 08:09:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src23.csv
[Mon Oct 17 08:09:23 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src23_1.ximg exists
[Mon Oct 17 08:09:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src23.csv
[Mon Oct 17 08:09:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01967_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:09:24 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Mon Oct 17 08:09:24 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Oct 17 08:09:24 2011] Fit fullrun_ccd7_acisf01967_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Oct 17 08:09:42 2011] Spatial fit model total counts = 63.999900, observed total counts = 64.000000
[Mon Oct 17 08:09:42 2011] Offset between fit and detection position for source 18 = 0.591231 pixels
[Mon Oct 17 08:09:42 2011] 62.988500 total counts/ 31.250600 bgd. counts: snr = 5.677394
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.591231 pixels
  Position = (612.3, 572.3) = 5 35 5.72 -69 16 43.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 31.7 +/- 7.9
  Background counts = 31.3
  Rate = 0.0004 +/- 9e-05
[Mon Oct 17 08:09:42 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:09:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:09:42 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:09:42 2011] Source does appear to be extended
[Mon Oct 17 08:09:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:10:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:10:02 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Mon Oct 17 08:10:02 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.017
[Mon Oct 17 08:10:02 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.49"
[Mon Oct 17 08:10:03 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src23.ximg exists
[Mon Oct 17 08:10:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src23.csv
[Mon Oct 17 08:10:03 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src23_1.ximg exists
[Mon Oct 17 08:10:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src23.csv
[Mon Oct 17 08:10:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01967_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:10:04 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Mon Oct 17 08:10:04 2011] fullrun_ccd7_acisf01967_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Oct 17 08:10:04 2011] Fit fullrun_ccd7_acisf01967_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Oct 17 08:10:19 2011] Spatial fit model total counts = 61.999900, observed total counts = 62.000000
[Mon Oct 17 08:10:19 2011] Offset between fit and detection position for source 18 = 0.005114 pixels
[Mon Oct 17 08:10:19 2011] 60.461500 total counts/ 28.589500 bgd. counts: snr = 5.960820
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.005114 pixels
  Position = (612.3, 572.3) = 5 35 5.72 -69 16 43.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 31.9 +/- 7.8
  Background counts = 28.6
  Rate = 0.0004 +/- 9e-05
[Mon Oct 17 08:10:19 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:10:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:10:19 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:10:19 2011] Source does appear to be extended
[Mon Oct 17 08:10:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:12:06 2011] Not overwriting source region fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_src.reg
[Mon Oct 17 08:12:06 2011] Extracting stamp from image fullrun_ccd7_acisf01967_pi14-548_cl_sm2.00.img.gz, (590, 550) - (635, 595)
[Mon Oct 17 08:12:06 2011] Writing fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18.gif
[Mon Oct 17 08:13:10 2011] ../../acisf01967/products/events/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_src.evt and ../../acisf01967/products/events/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Mon Oct 17 08:13:10 2011] Size of ../../acisf01967/products/events/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_src.evt.gz[events] = 38 counts
[Mon Oct 17 08:13:10 2011] Mean chipx,y = (535.50, 535.55)
[Mon Oct 17 08:13:10 2011] Mean tdetx,y = (4452.50, 2237.55)
[Mon Oct 17 08:13:10 2011] chipx,y range = (518.00-552.00, 518.00-554.00)
[Mon Oct 17 08:13:10 2011] Size of ../../acisf01967/products/events/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 52 counts
[Mon Oct 17 08:13:10 2011] ../../acisf01967/products/images/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_src.img and ../../acisf01967/products/images/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Mon Oct 17 08:13:10 2011] ../../acisf01967/products/spectra/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_src.pi and ../../acisf01967/products/spectra/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Mon Oct 17 08:13:10 2011] Not generating rmf since there are only 31 counts
[Mon Oct 17 08:13:13 2011] ../../acisf01967/products/lightcurves/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_src.lc and ../../acisf01967/products/lightcurves/fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Mon Oct 17 08:14:35 2011] 239.379
[Mon Oct 17 08:14:40 2011] Updating aperture counts using extracted products
[Mon Oct 17 08:14:40 2011] Error reading totcts from fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18_src.pi.gz
[Mon Oct 17 08:14:40 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 08:14:40 2011] Using photon index=1.80, rate=0.000363, arf fullrun_ccd7_acisf01967_pi14-548_pass1_cl_src18.arf
[Mon Oct 17 08:14:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 08:14:40 2011] Updating source flux to 2.8e-15
[Mon Oct 17 08:15:22 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting