[Mon Oct 17 08:07:48 2011] Detection parameters:
  Position = (907.6, 911.9) = 5 36 13.85 -69 12 40.2
  Extent = 0.8" x 0.6", rotation angle = 151 degrees
  Source counts = 11.1 +/- 4.1
  Background counts = 5.9
  Rate = 0.0001 +/- 4e-05

[Mon Oct 17 08:07:48 2011] Off-axis axis estimate = 4.95'
[Mon Oct 17 08:09:20 2011] Using EEF radius (= 1.16 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:09:20 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Mon Oct 17 08:09:20 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.916
[Mon Oct 17 08:09:20 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 1.16"
[Mon Oct 17 08:09:21 2011] fullrun_ccd6_acisf01967_pi14-548_cl_pass0_src21.ximg exists
[Mon Oct 17 08:09:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01967_pi14-548_cl_pass0_src21.csv
[Mon Oct 17 08:09:21 2011] fullrun_ccd6_acisf01967_pi14-548_cl_pass0_src21_1.ximg exists
[Mon Oct 17 08:09:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01967_pi14-548_cl_pass0_src21.csv
[Mon Oct 17 08:09:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01967_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01967_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:09:22 2011] fullrun_ccd6_acisf01967_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Mon Oct 17 08:09:22 2011] fullrun_ccd6_acisf01967_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Oct 17 08:09:22 2011] Fit fullrun_ccd6_acisf01967_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Oct 17 08:09:34 2011] Spatial fit model total counts = 47.382300, observed total counts = 49.000000
[Mon Oct 17 08:09:34 2011] Offset between fit and detection position for source 24 = 0.454815 pixels
[Mon Oct 17 08:09:34 2011] 50.026050 total counts/ 46.028400 bgd. counts: snr = 0.589239
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.454815 pixels
  Position = (907.6, 911.4) = 5 36 13.90 -69 12 40.7
  Extent = 0.3 (0.3-0.6)", rotation angle = 0
  Source counts = 4.0 +/- 7.1
  Background counts = 46.0
  Rate = 4e-05 +/- 7e-05
  Deleting source due to low Poisson probability