[Mon Oct 17 08:07:46 2011] Detection parameters:
  Position = (266.5, 1108.0) = 5 35 38.59 -69 23 29.9
  Extent = 1.7" x 1.1", rotation angle = 90 degrees
  Source counts = 22.4 +/- 5.7
  Background counts = 9.6
  Rate = 0.0002 +/- 6e-05

[Mon Oct 17 08:07:46 2011] Off-axis axis estimate = 7.31'
[Mon Oct 17 08:09:19 2011] Using EEF radius (= 2.37 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:09:19 2011] Initial guess for spatial extent in simple fitting = 2.37"
[Mon Oct 17 08:09:19 2011] source mask rpix=4.8, npix_max = 112, mask sum = 110, frac = 0.974
[Mon Oct 17 08:09:19 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 2.37"
[Mon Oct 17 08:09:20 2011] fullrun_ccd3_acisf01967_pi14-548_cl_pass0_src5.ximg exists
[Mon Oct 17 08:09:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01967_pi14-548_cl_pass0_src5.csv
[Mon Oct 17 08:09:20 2011] fullrun_ccd3_acisf01967_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Oct 17 08:09:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01967_pi14-548_cl_pass0_src5.csv
[Mon Oct 17 08:09:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01967_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01967_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:09:20 2011] fullrun_ccd3_acisf01967_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Oct 17 08:09:20 2011] fullrun_ccd3_acisf01967_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Oct 17 08:09:20 2011] Fit fullrun_ccd3_acisf01967_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Oct 17 08:09:30 2011] Spatial fit model total counts = 60.985300, observed total counts = 61.000000
[Mon Oct 17 08:09:30 2011] Offset between fit and detection position for source 3 = 0.829453 pixels
[Mon Oct 17 08:09:30 2011] 59.606200 total counts/ 41.761600 bgd. counts: snr = 2.761330
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.829453 pixels
  Position = (267.3, 1108.1) = 5 35 38.56 -69 23 30.1
  Extent = 1.1 (0.7-1.7)", rotation angle = 0
  Source counts = 17.8 +/- 7.7
  Background counts = 41.8
  Rate = 0.0002 +/- 8e-05
[Mon Oct 17 08:09:30 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:09:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:09:30 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:09:30 2011] Source does appear to be extended
[Mon Oct 17 08:09:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:09:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 08:09:59 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Mon Oct 17 08:09:59 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.979
[Mon Oct 17 08:09:59 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.12"
[Mon Oct 17 08:10:00 2011] fullrun_ccd3_acisf01967_pi14-548_cl_pass1_src5.ximg exists
[Mon Oct 17 08:10:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01967_pi14-548_cl_pass1_src5.csv
[Mon Oct 17 08:10:00 2011] fullrun_ccd3_acisf01967_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Oct 17 08:10:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01967_pi14-548_cl_pass1_src5.csv
[Mon Oct 17 08:10:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01967_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01967_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 08:10:00 2011] fullrun_ccd3_acisf01967_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Oct 17 08:10:00 2011] fullrun_ccd3_acisf01967_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Oct 17 08:10:00 2011] Fit fullrun_ccd3_acisf01967_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Oct 17 08:10:10 2011] Spatial fit model total counts = 30.998700, observed total counts = 31.000000
[Mon Oct 17 08:10:10 2011] Offset between fit and detection position for source 3 = 0.170173 pixels
[Mon Oct 17 08:10:10 2011] 30.694700 total counts/ 14.272000 bgd. counts: snr = 4.347125
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.170173 pixels
  Position = (267.2, 1108.0) = 5 35 38.57 -69 23 30.1
  Extent = 1.0 (0.6-2.2)", rotation angle = 0
  Source counts = 16.4 +/- 5.5
  Background counts = 14.3
  Rate = 0.0002 +/- 6e-05
[Mon Oct 17 08:10:10 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 08:10:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 08:10:10 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 08:10:10 2011] Source does appear to be extended
[Mon Oct 17 08:10:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 08:10:39 2011] Not overwriting source region fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 17 08:10:39 2011] Extracting stamp from image fullrun_ccd3_acisf01967_pi14-548_cl_sm2.00.img.gz, (220, 1061) - (314, 1155)
[Mon Oct 17 08:10:39 2011] Writing fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3.gif
[Mon Oct 17 08:10:51 2011] ../../acisf01967/products/events/fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_src.evt and ../../acisf01967/products/events/fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct 17 08:10:51 2011] Size of ../../acisf01967/products/events/fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_src.evt.gz[events] = 29 counts
[Mon Oct 17 08:10:51 2011] Mean chipx,y = (47.45, 907.86)
[Mon Oct 17 08:10:51 2011] Mean tdetx,y = (4224.14, 3108.45)
[Mon Oct 17 08:10:51 2011] chipx,y range = (28.00-64.00, 882.00-927.00)
[Mon Oct 17 08:10:51 2011] Size of ../../acisf01967/products/events/fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 100 counts
[Mon Oct 17 08:10:51 2011] ../../acisf01967/products/images/fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_src.img and ../../acisf01967/products/images/fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct 17 08:10:51 2011] ../../acisf01967/products/spectra/fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_src.pi and ../../acisf01967/products/spectra/fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Oct 17 08:10:51 2011] Not generating rmf since there are only 16 counts
[Mon Oct 17 08:10:54 2011] ../../acisf01967/products/lightcurves/fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_src.lc and ../../acisf01967/products/lightcurves/fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct 17 08:11:05 2011] 181.227
[Mon Oct 17 08:14:39 2011] Updating aperture counts using extracted products
[Mon Oct 17 08:14:39 2011] Error reading totcts from fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct 17 08:14:39 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 08:14:39 2011] Using photon index=1.80, rate=0.000166, arf fullrun_ccd3_acisf01967_pi14-548_pass1_cl_src3.arf
[Mon Oct 17 08:14:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 08:14:39 2011] Updating source flux to 2e-15
[Mon Oct 17 08:14:49 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting