[Sat Feb 25 22:16:39 2012] Detection parameters:
  Position = (1002.6, 654.3) = 16 15 27.50 -50 41 54.1
  Extent = 0.7" x 0.5", rotation angle = 144 degrees
  Source counts = 12.1 +/- 3.6
  Background counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Sat Feb 25 22:16:41 2012] Off-axis axis estimate = 3.07'
[Sat Feb 25 23:01:24 2012] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 23:01:24 2012] Initial guess for spatial extent in simple fitting = 0.59"
[Sat Feb 25 23:01:24 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.773
[Sat Feb 25 23:01:24 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 0.59"
[Sat Feb 25 23:17:09 2012] fullrun_ccd3_acisf01960_pi14-548_cl_pass0_src12.ximg exists
[Sat Feb 25 23:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01960_pi14-548_cl_pass0_src12.csv
[Sat Feb 25 23:17:09 2012] fullrun_ccd3_acisf01960_pi14-548_cl_pass0_src12_1.ximg exists
[Sat Feb 25 23:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01960_pi14-548_cl_pass0_src12.csv
[Sat Feb 25 23:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01960_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01960_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 23:17:09 2012] fullrun_ccd3_acisf01960_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sat Feb 25 23:17:09 2012] fullrun_ccd3_acisf01960_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Feb 25 23:17:09 2012] Fit fullrun_ccd3_acisf01960_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Feb 25 23:49:02 2012] Spatial fit model total counts = 14.799500, observed total counts = 15.000000
[Sat Feb 25 23:49:02 2012] Offset between fit and detection position for source 15 = 0.785826 pixels
[Sat Feb 25 23:49:02 2012] 15.510420 total counts/ 5.712930 bgd. counts: snr = 4.099070
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.785826 pixels
  Position = (1003.2, 654.8) = 16 15 27.49 -50 41 54.0
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 9.8 +/- 3.9
  Background counts = 5.7
  Rate = 0.0003 +/- 0.0001
[Sat Feb 25 23:49:02 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 23:49:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 23:49:02 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 23:49:02 2012] Source does appear to be extended
[Sat Feb 25 23:49:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 00:23:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:23:36 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Feb 26 00:23:36 2012] Spatial fitting skipped for pass 1: source                                 has 9.8 net counts, is at off-axis angle 3.1'
[Sun Feb 26 00:37:00 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 00:37:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 00:37:00 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 00:37:00 2012] Source does appear to be extended
[Sun Feb 26 00:37:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 01:00:42 2012] Writing source region out to fullrun_ccd3_acisf01960_pi14-548_pass1_cl_src15_src.reg
[Sun Feb 26 01:00:42 2012] Extracting stamp from image fullrun_ccd3_acisf01960_pi14-548_cl_sm2.00.img.gz, (985, 637) - (1021, 673)
[Sun Feb 26 01:00:42 2012] Writing fullrun_ccd3_acisf01960_pi14-548_pass1_cl_src15.gif
[Sun Feb 26 01:07:12 2012] Size of ../../acisf01960/products/events/fullrun_ccd3_acisf01960_pi14-548_pass1_cl_src15_src.evt.gz[events] = 11 counts
[Sun Feb 26 01:07:12 2012] Mean chipx,y = (693.82, 734.64)
[Sun Feb 26 01:07:12 2012] Mean tdetx,y = (4397.36, 3754.82)
[Sun Feb 26 01:07:12 2012] chipx,y range = (679.00-709.00, 722.00-756.00)
[Sun Feb 26 01:07:12 2012] Size of ../../acisf01960/products/events/fullrun_ccd3_acisf01960_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 3 counts
[Sun Feb 26 01:07:13 2012] Not generating rmf since there are only 9 counts
[Sun Feb 26 01:07:13 2012] arf not found, will run specextract
[Sun Feb 26 01:07:39 2012] ../../acisf01960/products/spectra/fullrun_ccd3_acisf01960_pi14-548_pass1_cl_src15.warf not found
[Sun Feb 26 01:07:39 2012] ../../acisf01960/products/spectra/fullrun_ccd3_acisf01960_pi14-548_pass1_cl_src15.wrmf not found
[Sun Feb 26 01:07:39 2012] Removal of ../../acisf01960/products/spectra/fullrun_ccd3_acisf01960_pi14-548_pass1_cl_src15.soff failed
[Sun Feb 26 01:19:21 2012] Spectrum 15 has only 10 counts, deleting rmf
[Sun Feb 26 01:19:21 2012] 198.52
[Sun Feb 26 01:19:26 2012] Updating aperture counts using extracted products
[Sun Feb 26 01:19:26 2012] Error reading totcts from fullrun_ccd3_acisf01960_pi14-548_pass1_cl_src15_src.pi.gz
[Sun Feb 26 01:19:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 01:19:26 2012] Using photon index=1.80, rate=0.000331, arf fullrun_ccd3_acisf01960_pi14-548_pass1_cl_src15.arf
[Sun Feb 26 01:19:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 26 01:19:26 2012] Updating source flux to 6.1e-15
[Sun Feb 26 01:19:32 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting