[Sat Feb 25 22:16:36 2012] Detection parameters:
  Position = (840.7, 1242.9) = 16 15 2.63 -50 43 44.5
  Extent = 0.7" x 0.5", rotation angle = 147 degrees
  Source counts = 14.0 +/- 3.9
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Sat Feb 25 22:16:37 2012] Off-axis axis estimate = 1.79'
[Sat Feb 25 22:54:13 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 22:54:13 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Feb 25 22:54:13 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.840
[Sat Feb 25 22:54:13 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 0.41"
[Sat Feb 25 23:01:24 2012] fullrun_ccd2_acisf01960_pi14-548_cl_pass0_src4.ximg exists
[Sat Feb 25 23:01:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01960_pi14-548_cl_pass0_src4.csv
[Sat Feb 25 23:01:24 2012] fullrun_ccd2_acisf01960_pi14-548_cl_pass0_src4_1.ximg exists
[Sat Feb 25 23:01:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01960_pi14-548_cl_pass0_src4.csv
[Sat Feb 25 23:01:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01960_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01960_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 23:01:24 2012] fullrun_ccd2_acisf01960_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sat Feb 25 23:01:24 2012] fullrun_ccd2_acisf01960_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Feb 25 23:01:24 2012] Fit fullrun_ccd2_acisf01960_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Feb 25 23:49:00 2012] Spatial fit model total counts = 14.192100, observed total counts = 16.000000
[Sat Feb 25 23:49:00 2012] Offset between fit and detection position for source 2 = 0.699595 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.699595 pixels
  Position = (841.0, 1243.5) = 16 15 2.64 -50 43 44.5
  Extent = 0.9 (0.7-1.4)" x 0.2 (0.2-0.3)", rotation angle = 33 (24-40) degrees
  Source counts = 14.4 +/- 3.8
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sat Feb 25 23:49:00 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 23:49:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 23:49:00 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 23:49:00 2012] Source does appear to be extended
[Sat Feb 25 23:49:00 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.42
[Sat Feb 25 23:49:00 2012] Source is asymmetric
[Sun Feb 26 00:17:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:17:10 2012] Initial guess for spatial extent in simple fitting = 0.57"
[Sun Feb 26 00:17:10 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.083
[Sun Feb 26 00:17:10 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 0.57"
[Sun Feb 26 00:23:36 2012] fullrun_ccd2_acisf01960_pi14-548_cl_pass1_src4.ximg exists
[Sun Feb 26 00:23:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01960_pi14-548_cl_pass1_src4.csv
[Sun Feb 26 00:23:36 2012] fullrun_ccd2_acisf01960_pi14-548_cl_pass1_src4_1.ximg exists
[Sun Feb 26 00:23:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01960_pi14-548_cl_pass1_src4.csv
[Sun Feb 26 00:23:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01960_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01960_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 00:23:36 2012] fullrun_ccd2_acisf01960_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun Feb 26 00:23:36 2012] fullrun_ccd2_acisf01960_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Feb 26 00:23:36 2012] Fit fullrun_ccd2_acisf01960_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Feb 26 00:36:58 2012] Spatial fit model total counts = 15.853300, observed total counts = 16.000000
[Sun Feb 26 00:36:58 2012] Offset between fit and detection position for source 2 = 0.221807 pixels
[Sun Feb 26 00:36:58 2012] 15.757810 total counts/ 3.053710 bgd. counts: snr = 7.269926
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.221807 pixels
  Position = (841.2, 1243.4) = 16 15 2.63 -50 43 44.5
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 12.7 +/- 4.0
  Background counts = 3.1
  Rate = 0.0004 +/- 0.0001
[Sun Feb 26 00:36:58 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 00:36:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 00:36:58 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 00:36:58 2012] Source does appear to be extended
[Sun Feb 26 00:36:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 00:51:24 2012] Writing source region out to fullrun_ccd2_acisf01960_pi14-548_pass1_cl_src2_src.reg
[Sun Feb 26 00:51:24 2012] Extracting stamp from image fullrun_ccd2_acisf01960_pi14-548_cl_sm2.00.img.gz, (826, 1228) - (857, 1259)
[Sun Feb 26 00:51:24 2012] Writing fullrun_ccd2_acisf01960_pi14-548_pass1_cl_src2.gif
[Sun Feb 26 00:53:06 2012] Size of ../../acisf01960/products/events/fullrun_ccd2_acisf01960_pi14-548_pass1_cl_src2_src.evt.gz[events] = 13 counts
[Sun Feb 26 00:53:06 2012] Mean chipx,y = (88.77, 865.69)
[Sun Feb 26 00:53:06 2012] Mean tdetx,y = (3926.69, 3997.23)
[Sun Feb 26 00:53:06 2012] chipx,y range = (74.00-105.00, 842.00-875.00)
[Sun Feb 26 00:53:06 2012] Size of ../../acisf01960/products/events/fullrun_ccd2_acisf01960_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 3 counts
[Sun Feb 26 00:53:07 2012] Not generating rmf since there are only 12 counts
[Sun Feb 26 00:53:07 2012] arf not found, will run specextract
[Sun Feb 26 00:53:42 2012] ../../acisf01960/products/spectra/fullrun_ccd2_acisf01960_pi14-548_pass1_cl_src2.warf not found
[Sun Feb 26 00:53:42 2012] ../../acisf01960/products/spectra/fullrun_ccd2_acisf01960_pi14-548_pass1_cl_src2.wrmf not found
[Sun Feb 26 00:53:42 2012] Removal of ../../acisf01960/products/spectra/fullrun_ccd2_acisf01960_pi14-548_pass1_cl_src2.soff failed
[Sun Feb 26 01:00:41 2012] Spectrum 2 has only 13 counts, deleting rmf
[Sun Feb 26 01:00:41 2012] 205.235
[Sun Feb 26 01:19:26 2012] Updating aperture counts using extracted products
[Sun Feb 26 01:19:26 2012] Error reading totcts from fullrun_ccd2_acisf01960_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Feb 26 01:19:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 01:19:26 2012] Using photon index=1.80, rate=0.00043, arf fullrun_ccd2_acisf01960_pi14-548_pass1_cl_src2.arf
[Sun Feb 26 01:19:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 26 01:19:26 2012] Updating source flux to 7.7e-15
[Sun Feb 26 01:19:31 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 26 01:19:32 2012] acisf01960/analysis//spectral/fullrun_ccd2_acisf01960_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete