[Sat Feb 25 22:16:31 2012] Detection parameters:
  Position = (850.8, 901.0) = 16 14 18.83 -50 41 26.6
  Extent = 1.9" x 1.4", rotation angle = 20 degrees
  Source counts = 62.1 +/- 8.2
  Background counts = 5.9
  Rate = 0.002 +/- 0.0003

[Sat Feb 25 22:16:31 2012] Off-axis axis estimate = 7.85'
[Sat Feb 25 22:19:16 2012] Using EEF radius (= 2.73 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 22:19:16 2012] Initial guess for spatial extent in simple fitting = 2.73"
[Sat Feb 25 22:19:16 2012] source mask rpix=5.5, npix_max = 146, mask sum = 143, frac = 0.977
[Sat Feb 25 22:19:16 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 2.73"
[Sat Feb 25 22:40:28 2012] fullrun_ccd0_acisf01960_pi14-548_cl_pass0_src10.ximg exists
[Sat Feb 25 22:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01960_pi14-548_cl_pass0_src10.csv
[Sat Feb 25 22:40:28 2012] fullrun_ccd0_acisf01960_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Feb 25 22:40:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01960_pi14-548_cl_pass0_src10.csv
[Sat Feb 25 22:40:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01960_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01960_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 22:40:28 2012] fullrun_ccd0_acisf01960_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Feb 25 22:40:28 2012] fullrun_ccd0_acisf01960_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Feb 25 22:40:28 2012] Fit fullrun_ccd0_acisf01960_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Feb 25 23:48:58 2012] Spatial fit model total counts = 79.998000, observed total counts = 80.000000
[Sat Feb 25 23:48:58 2012] Offset between fit and detection position for source 10 = 0.573855 pixels
[Sat Feb 25 23:48:58 2012] 80.144600 total counts/ 20.076600 bgd. counts: snr = 13.405965
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.573855 pixels
  Position = (850.3, 900.6) = 16 14 18.88 -50 41 27.0
  Extent = 1.9 (1.4-2.5)", rotation angle = 0
  Source counts = 60.1 +/- 9.0
  Background counts = 20.1
  Rate = 0.002 +/- 0.0003
[Sat Feb 25 23:48:58 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 23:48:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 23:48:58 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 23:48:58 2012] Source does appear to be extended
[Sat Feb 25 23:48:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 23:49:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 23:49:21 2012] Initial guess for spatial extent in simple fitting = 1.90"
[Sat Feb 25 23:49:21 2012] source mask rpix=3.9, npix_max = 75, mask sum = 81, frac = 1.067
[Sat Feb 25 23:49:21 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 1.90"
[Sun Feb 26 00:04:31 2012] fullrun_ccd0_acisf01960_pi14-548_cl_pass1_src8.ximg exists
[Sun Feb 26 00:04:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01960_pi14-548_cl_pass1_src8.csv
[Sun Feb 26 00:04:31 2012] fullrun_ccd0_acisf01960_pi14-548_cl_pass1_src8_1.ximg exists
[Sun Feb 26 00:04:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01960_pi14-548_cl_pass1_src8.csv
[Sun Feb 26 00:04:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01960_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01960_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 00:04:31 2012] fullrun_ccd0_acisf01960_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sun Feb 26 00:04:31 2012] fullrun_ccd0_acisf01960_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Feb 26 00:04:31 2012] Fit fullrun_ccd0_acisf01960_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Feb 26 00:36:56 2012] Spatial fit model total counts = 73.325700, observed total counts = 73.000000
[Sun Feb 26 00:36:56 2012] Offset between fit and detection position for source 10 = 0.769629 pixels
[Sun Feb 26 00:36:56 2012] 74.553400 total counts/ 28.203300 bgd. counts: snr = 8.727718
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.769629 pixels
  Position = (849.7, 900.2) = 16 14 18.91 -50 41 27.2
  Extent = 1.4 (1.1-1.9)", rotation angle = 0
  Source counts = 46.4 +/- 8.6
  Background counts = 28.2
  Rate = 0.002 +/- 0.0003
[Sun Feb 26 00:36:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 00:36:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 00:36:56 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 00:36:56 2012] Source does appear to be extended
[Sun Feb 26 00:36:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 00:37:18 2012] Writing source region out to fullrun_ccd0_acisf01960_pi14-548_pass1_cl_src10_src.reg
[Sun Feb 26 00:37:18 2012] Extracting stamp from image fullrun_ccd0_acisf01960_pi14-548_cl_sm2.00.img.gz, (786, 837) - (913, 964)
[Sun Feb 26 00:37:18 2012] Writing fullrun_ccd0_acisf01960_pi14-548_pass1_cl_src10.gif
[Sun Feb 26 00:42:02 2012] Size of ../../acisf01960/products/events/fullrun_ccd0_acisf01960_pi14-548_pass1_cl_src10_src.evt.gz[events] = 63 counts
[Sun Feb 26 00:42:02 2012] Mean chipx,y = (296.87, 555.21)
[Sun Feb 26 00:42:02 2012] Mean tdetx,y = (3616.21, 4835.13)
[Sun Feb 26 00:42:02 2012] chipx,y range = (271.00-320.00, 533.00-580.00)
[Sun Feb 26 00:42:02 2012] Size of ../../acisf01960/products/events/fullrun_ccd0_acisf01960_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 41 counts
[Sun Feb 26 00:42:03 2012] Not generating rmf since there are only 46 counts
[Sun Feb 26 00:42:03 2012] arf not found, will run specextract
[Sun Feb 26 00:42:27 2012] ../../acisf01960/products/spectra/fullrun_ccd0_acisf01960_pi14-548_pass1_cl_src10.warf not found
[Sun Feb 26 00:42:27 2012] ../../acisf01960/products/spectra/fullrun_ccd0_acisf01960_pi14-548_pass1_cl_src10.wrmf not found
[Sun Feb 26 00:42:27 2012] Removal of ../../acisf01960/products/spectra/fullrun_ccd0_acisf01960_pi14-548_pass1_cl_src10.soff failed
[Sun Feb 26 00:45:12 2012] Spectrum 10 has only 46 counts, deleting rmf
[Sun Feb 26 00:45:12 2012] 159.368
[Sun Feb 26 01:19:25 2012] Updating aperture counts using extracted products
[Sun Feb 26 01:19:25 2012] Error reading totcts from fullrun_ccd0_acisf01960_pi14-548_pass1_cl_src10_src.pi.gz
[Sun Feb 26 01:19:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 01:19:25 2012] Using photon index=1.80, rate=0.00157, arf fullrun_ccd0_acisf01960_pi14-548_pass1_cl_src10.arf
[Sun Feb 26 01:19:25 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 26 01:19:25 2012] Updating source flux to 3.5e-14
[Sun Feb 26 01:19:29 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 26 01:19:30 2012] acisf01960/analysis//spectral/fullrun_ccd0_acisf01960_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete