[Sat Oct 8 00:44:40 2011] Detection parameters: Position = (418.1, 1130.2) = 15 2 26.34 -41 44 53.8 Extent = 0.5" x 0.5", rotation angle = 30 degrees Source counts = 28.5 +/- 8.7 Background counts = 47.5 Rate = 0.0003 +/- 0.0001 [Sat Oct 8 00:44:58 2011] Off-axis axis estimate = 2.25' [Sat Oct 8 00:50:51 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting [Sat Oct 8 00:50:51 2011] Initial guess for spatial extent in simple fitting = 0.46" [Sat Oct 8 00:50:51 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.100 [Sat Oct 8 00:50:51 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.46" [Sat Oct 8 00:50:54 2011] fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src37.ximg exists [Sat Oct 8 00:50:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src37.csv [Sat Oct 8 00:50:54 2011] fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src37_1.ximg exists [Sat Oct 8 00:50:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src37.csv [Sat Oct 8 00:50:54 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src37_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 8 00:50:55 2011] fullrun_ccd7_acisf01959_pi14-548_cl_pass0_tfrozen_src37.ximg exists [Sat Oct 8 00:50:55 2011] fullrun_ccd7_acisf01959_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists [Sat Oct 8 00:50:55 2011] Fit fullrun_ccd7_acisf01959_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly [Sat Oct 8 00:51:34 2011] Spatial fit model total counts = 212.480000, observed total counts = 213.000000 [Sat Oct 8 00:51:34 2011] Offset between fit and detection position for source 23 = 0.278986 pixels [Sat Oct 8 00:51:34 2011] 213.502500 total counts/ 191.500000 bgd. counts: snr = 1.589965 Spatial fit parameters: Offset between fit and detection position for source 23 = 0.278986 pixels Position = (417.9, 1130.4) = 15 2 26.37 -41 44 54.0 Extent = 0.3 (0.2-0.5)", rotation angle = 0 Source counts = 22.0 +/- 14.6 Background counts = 191.5 Rate = 0.0002 +/- 0.0002 Deleting source due to low Poisson probability