[Sat Oct 8 00:44:38 2011] Detection parameters: Position = (684.3, 502.4) = 15 2 14.63 -41 50 2.7 Extent = 0.6" x 0.5", rotation angle = 38 degrees Source counts = 23.3 +/- 7.2 Background counts = 28.7 Rate = 0.0003 +/- 8e-05 [Sat Oct 8 00:44:58 2011] Off-axis axis estimate = 3.49' [Sat Oct 8 00:50:51 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting [Sat Oct 8 00:50:51 2011] Initial guess for spatial extent in simple fitting = 0.69" [Sat Oct 8 00:50:51 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.104 [Sat Oct 8 00:50:51 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 0.69" [Sat Oct 8 00:50:54 2011] fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src43.ximg exists [Sat Oct 8 00:50:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src43.csv [Sat Oct 8 00:50:54 2011] fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src43_1.ximg exists [Sat Oct 8 00:50:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src43.csv [Sat Oct 8 00:50:54 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src43_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf01959_pi14-548_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 8 00:50:56 2011] fullrun_ccd7_acisf01959_pi14-548_cl_pass0_tfrozen_src43.ximg exists [Sat Oct 8 00:50:56 2011] fullrun_ccd7_acisf01959_pi14-548_cl_pass0_tfrozen_src43_1.ximg exists [Sat Oct 8 00:50:56 2011] Fit fullrun_ccd7_acisf01959_pi14-548_cl_pass0_tfrozen_src43 appears to have run properly [Sat Oct 8 00:51:34 2011] Spatial fit model total counts = 149.922000, observed total counts = 149.000000 [Sat Oct 8 00:51:34 2011] Offset between fit and detection position for source 11 = 0.462311 pixels [Sat Oct 8 00:51:34 2011] 150.158200 total counts/ 135.922000 bgd. counts: snr = 1.221094 Spatial fit parameters: Offset between fit and detection position for source 11 = 0.462311 pixels Position = (683.8, 502.2) = 15 2 14.67 -41 50 3.0 Extent = 0.3 (0.2-0.7)", rotation angle = 0 Source counts = 14.2 +/- 12.3 Background counts = 135.9 Rate = 0.0002 +/- 0.0001 Deleting source due to low Poisson probability