[Sat Oct 8 00:44:20 2011] Detection parameters: Position = (593.5, 1049.8) = 15 2 41.19 -41 55 56.2 Extent = 3.2" x 2.0", rotation angle = 133 degrees Source counts = 37.6 +/- 10.7 Background counts = 76.4 Rate = 0.0004 +/- 0.0001 [Sat Oct 8 00:44:21 2011] Off-axis axis estimate = 9.31' [Sat Oct 8 00:50:44 2011] Using EEF radius (= 3.83 ")to estimate initial spatial extent for simple fitting [Sat Oct 8 00:50:44 2011] Initial guess for spatial extent in simple fitting = 3.83" [Sat Oct 8 00:50:44 2011] source mask rpix=7.8, npix_max = 275, mask sum = 289, frac = 1.050 [Sat Oct 8 00:50:44 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 3.83" [Sat Oct 8 00:50:44 2011] fullrun_ccd3_acisf01959_pi14-548_cl_pass0_src7.ximg exists [Sat Oct 8 00:50:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01959_pi14-548_cl_pass0_src7.csv [Sat Oct 8 00:50:44 2011] fullrun_ccd3_acisf01959_pi14-548_cl_pass0_src7_1.ximg exists [Sat Oct 8 00:50:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01959_pi14-548_cl_pass0_src7.csv [Sat Oct 8 00:50:44 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf01959_pi14-548_cl_pass0_src7_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf01959_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 8 00:50:45 2011] fullrun_ccd3_acisf01959_pi14-548_cl_pass0_tfrozen_src7.ximg exists [Sat Oct 8 00:50:45 2011] fullrun_ccd3_acisf01959_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists [Sat Oct 8 00:50:45 2011] Fit fullrun_ccd3_acisf01959_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly [Sat Oct 8 00:51:12 2011] Spatial fit model total counts = 337.917000, observed total counts = 338.000000 [Sat Oct 8 00:51:12 2011] Offset between fit and detection position for source 7 = 3.979037 pixels [Sat Oct 8 00:51:12 2011] 337.499000 total counts/ 322.142000 bgd. counts: snr = 0.855624 Spatial fit parameters: Offset between fit and detection position for source 7 = 3.979037 pixels Position = (596.4, 1047.0) = 15 2 41.08 -41 55 57.8 Extent = 1.0" x 1.0", rotation angle = 0 Source counts = 15.4 +/- 18.4 Background counts = 322.1 Rate = 0.0002 +/- 0.0002 Deleting source due to low Poisson probability