[Mon Oct 10 03:33:32 2011] Detection parameters:
  Position = (447.7, 128.2) = 19 35 7.39 -52 52 15.2
  Extent = 1.2" x 0.7", rotation angle = 110 degrees
  Source counts = 30.1 +/- 6.2
  Background counts = 8.9
  Rate = 0.0006 +/- 0.0001

[Mon Oct 10 03:33:33 2011] Off-axis axis estimate = 1.17'
[Mon Oct 10 03:35:00 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 03:35:00 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 10 03:35:00 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.383
[Mon Oct 10 03:35:00 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.38"
[Mon Oct 10 03:35:00 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src10.ximg exists
[Mon Oct 10 03:35:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src10.csv
[Mon Oct 10 03:35:00 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src10_1.ximg exists
[Mon Oct 10 03:35:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src10.csv
[Mon Oct 10 03:35:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 03:35:01 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Mon Oct 10 03:35:01 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Oct 10 03:35:01 2011] Fit fullrun_ccd7_acisf01956_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Oct 10 03:35:13 2011] Spatial fit model total counts = 49.861200, observed total counts = 50.000000
[Mon Oct 10 03:35:13 2011] Offset between fit and detection position for source 4 = 0.711496 pixels
[Mon Oct 10 03:35:13 2011] 48.472600 total counts/ 28.979600 bgd. counts: snr = 3.621033
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.711496 pixels
  Position = (448.2, 128.7) = 19 35 7.39 -52 52 15.2
  Extent = 0.6 (0.3-1.4)", rotation angle = 0
  Source counts = 19.5 +/- 7.0
  Background counts = 29.0
  Rate = 0.0004 +/- 0.0001
[Mon Oct 10 03:35:13 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 03:35:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 03:35:13 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 03:35:13 2011] Source does appear to be extended
[Mon Oct 10 03:35:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 03:35:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 03:35:32 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Mon Oct 10 03:35:32 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.210
[Mon Oct 10 03:35:32 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.65"
[Mon Oct 10 03:35:32 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src10.ximg exists
[Mon Oct 10 03:35:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src10.csv
[Mon Oct 10 03:35:32 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src10_1.ximg exists
[Mon Oct 10 03:35:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src10.csv
[Mon Oct 10 03:35:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 03:35:33 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Mon Oct 10 03:35:33 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Oct 10 03:35:33 2011] Fit fullrun_ccd7_acisf01956_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Oct 10 03:35:42 2011] Spatial fit model total counts = 49.857000, observed total counts = 50.000000
[Mon Oct 10 03:35:42 2011] Offset between fit and detection position for source 4 = 0.034379 pixels
[Mon Oct 10 03:35:42 2011] 48.500600 total counts/ 28.839200 bgd. counts: snr = 3.661195
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.034379 pixels
  Position = (448.3, 128.7) = 19 35 7.39 -52 52 15.2
  Extent = 0.7 (0.3-1.4)", rotation angle = 0
  Source counts = 19.7 +/- 7.0
  Background counts = 28.8
  Rate = 0.0004 +/- 0.0001
[Mon Oct 10 03:35:42 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 03:35:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 03:35:42 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 03:35:42 2011] Source does appear to be extended
[Mon Oct 10 03:35:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 03:37:19 2011] Not overwriting source region fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_src.reg
[Mon Oct 10 03:37:19 2011] Extracting stamp from image fullrun_ccd7_acisf01956_pi14-548_cl_sm2.00.img.gz, (418, 98) - (479, 159)
[Mon Oct 10 03:37:19 2011] Writing fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4.gif
[Mon Oct 10 03:37:45 2011] ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_src.evt and ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Mon Oct 10 03:37:45 2011] Size of ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_src.evt.gz[events] = 32 counts
[Mon Oct 10 03:37:45 2011] Mean chipx,y = (98.09, 434.22)
[Mon Oct 10 03:37:45 2011] Mean tdetx,y = (4015.09, 2136.22)
[Mon Oct 10 03:37:45 2011] chipx,y range = (80.00-115.00, 415.00-453.00)
[Mon Oct 10 03:37:45 2011] Size of ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 83 counts
[Mon Oct 10 03:37:45 2011] ../../acisf01956/products/images/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_src.img and ../../acisf01956/products/images/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Mon Oct 10 03:37:45 2011] ../../acisf01956/products/spectra/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_src.pi and ../../acisf01956/products/spectra/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Mon Oct 10 03:37:45 2011] Not generating rmf since there are only 19 counts
[Mon Oct 10 03:37:48 2011] ../../acisf01956/products/lightcurves/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_src.lc and ../../acisf01956/products/lightcurves/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Mon Oct 10 03:38:34 2011] 241.941
[Mon Oct 10 03:38:38 2011] Updating aperture counts using extracted products
[Mon Oct 10 03:38:38 2011] Error reading totcts from fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4_src.pi.gz
[Mon Oct 10 03:38:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 03:38:38 2011] Using photon index=1.80, rate=0.000414, arf fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src4.arf
[Mon Oct 10 03:38:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 03:38:38 2011] Updating source flux to 2.6e-15
[Mon Oct 10 03:39:05 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting