[Mon Oct 10 03:33:33 2011] Detection parameters:
  Position = (943.6, 971.8) = 19 34 40.50 -52 45 20.0
  Extent = 1.6" x 1.1", rotation angle = 77 degrees
  Source counts = 19.9 +/- 5.7
  Background counts = 13.1
  Rate = 0.0004 +/- 0.0001

[Mon Oct 10 03:33:33 2011] Off-axis axis estimate = 6.86'
[Mon Oct 10 03:35:00 2011] Using EEF radius (= 2.10 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 03:35:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 03:35:00 2011] Initial guess for spatial extent in simple fitting = 2.10"
[Mon Oct 10 03:35:00 2011] source mask rpix=4.3, npix_max = 90, mask sum = 90, frac = 0.991
[Mon Oct 10 03:35:00 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 2.10"
[Mon Oct 10 03:35:00 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src16.ximg exists
[Mon Oct 10 03:35:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src16.csv
[Mon Oct 10 03:35:00 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src16_1.ximg exists
[Mon Oct 10 03:35:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src16.csv
[Mon Oct 10 03:35:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 03:35:01 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Mon Oct 10 03:35:01 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Oct 10 03:35:01 2011] Fit fullrun_ccd7_acisf01956_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Oct 10 03:35:13 2011] Spatial fit model total counts = 67.998000, observed total counts = 68.000000
[Mon Oct 10 03:35:13 2011] Offset between fit and detection position for source 26 = 1.993845 pixels
[Mon Oct 10 03:35:13 2011] 67.665300 total counts/ 44.194200 bgd. counts: snr = 3.530619
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.993845 pixels
  Position = (945.6, 972.3) = 19 34 40.42 -52 45 20.0
  Extent = 1.6 (0.5-2.6)", rotation angle = 0
  Source counts = 23.5 +/- 8.2
  Background counts = 44.2
  Rate = 0.0005 +/- 0.0002
[Mon Oct 10 03:35:13 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 03:35:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 03:35:13 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 03:35:13 2011] Source does appear to be extended
[Mon Oct 10 03:35:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 03:35:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 03:35:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 03:35:32 2011] Initial guess for spatial extent in simple fitting = 1.59"
[Mon Oct 10 03:35:32 2011] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.879
[Mon Oct 10 03:35:32 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 1.59"
[Mon Oct 10 03:35:32 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src16.ximg exists
[Mon Oct 10 03:35:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src16.csv
[Mon Oct 10 03:35:33 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src16_1.ximg exists
[Mon Oct 10 03:35:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src16.csv
[Mon Oct 10 03:35:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 03:35:33 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Mon Oct 10 03:35:33 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Oct 10 03:35:33 2011] Fit fullrun_ccd7_acisf01956_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Oct 10 03:35:42 2011] Spatial fit model total counts = 49.996500, observed total counts = 50.000000
[Mon Oct 10 03:35:42 2011] Offset between fit and detection position for source 26 = 1.021850 pixels
[Mon Oct 10 03:35:42 2011] 49.643700 total counts/ 13.247700 bgd. counts: snr = 9.999618
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.021850 pixels
  Position = (946.6, 972.3) = 19 34 40.37 -52 45 20.0
  Extent = 2.2 (1.3-2.7)", rotation angle = 0
  Source counts = 36.4 +/- 7.0
  Background counts = 13.2
  Rate = 0.0008 +/- 0.0001
[Mon Oct 10 03:35:42 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 03:35:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 03:35:42 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 03:35:42 2011] Source does appear to be extended
[Mon Oct 10 03:35:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 03:37:19 2011] Not overwriting source region fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_src.reg
[Mon Oct 10 03:37:19 2011] Extracting stamp from image fullrun_ccd7_acisf01956_pi14-548_cl_sm2.00.img.gz, (845, 871) - (1048, 1074)
[Mon Oct 10 03:37:19 2011] Writing fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26.gif
[Mon Oct 10 03:38:01 2011] ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_src.evt and ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Mon Oct 10 03:38:01 2011] Size of ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_src.evt.gz[events] = 100 counts
[Mon Oct 10 03:38:01 2011] Mean chipx,y = (955.19, 907.78)
[Mon Oct 10 03:38:01 2011] Mean tdetx,y = (4872.19, 2609.78)
[Mon Oct 10 03:38:01 2011] chipx,y range = (925.00-988.00, 880.00-942.00)
[Mon Oct 10 03:38:01 2011] Size of ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 750 counts
[Mon Oct 10 03:38:01 2011] ../../acisf01956/products/images/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_src.img and ../../acisf01956/products/images/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Mon Oct 10 03:38:01 2011] ../../acisf01956/products/spectra/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_src.pi and ../../acisf01956/products/spectra/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Mon Oct 10 03:38:01 2011] Not generating rmf since there are only 36 counts
[Mon Oct 10 03:38:04 2011] ../../acisf01956/products/lightcurves/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_src.lc and ../../acisf01956/products/lightcurves/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Mon Oct 10 03:38:34 2011] 201.999
[Mon Oct 10 03:38:38 2011] Updating aperture counts using extracted products
[Mon Oct 10 03:38:38 2011] Error reading totcts from fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26_src.pi.gz
[Mon Oct 10 03:38:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 03:38:38 2011] Using photon index=1.80, rate=0.000766, arf fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src26.arf
[Mon Oct 10 03:38:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 03:38:38 2011] Updating source flux to 5.8e-15
[Mon Oct 10 03:39:05 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting