[Mon Oct 10 03:33:32 2011] Detection parameters:
  Position = (750.1, 359.1) = 19 34 50.97 -52 50 21.6
  Extent = 0.7" x 0.6", rotation angle = 43 degrees
  Source counts = 40.7 +/- 6.9
  Background counts = 6.3
  Rate = 0.0009 +/- 0.0001

[Mon Oct 10 03:33:33 2011] Off-axis axis estimate = 2.02'
[Mon Oct 10 03:35:00 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 03:35:00 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Mon Oct 10 03:35:00 2011] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.527
[Mon Oct 10 03:35:00 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.43"
[Mon Oct 10 03:35:00 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src8.ximg exists
[Mon Oct 10 03:35:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src8.csv
[Mon Oct 10 03:35:00 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src8_1.ximg exists
[Mon Oct 10 03:35:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src8.csv
[Mon Oct 10 03:35:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01956_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 03:35:01 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Mon Oct 10 03:35:01 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Oct 10 03:35:01 2011] Fit fullrun_ccd7_acisf01956_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Oct 10 03:35:13 2011] Spatial fit model total counts = 55.133000, observed total counts = 54.000000
[Mon Oct 10 03:35:13 2011] Offset between fit and detection position for source 10 = 1.010839 pixels
[Mon Oct 10 03:35:13 2011] 54.554600 total counts/ 16.793800 bgd. counts: snr = 9.214392
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.010839 pixels
  Position = (750.7, 359.8) = 19 34 50.96 -52 50 21.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 37.8 +/- 7.4
  Background counts = 16.8
  Rate = 0.0008 +/- 0.0002
[Mon Oct 10 03:35:13 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 03:35:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 03:35:13 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 03:35:13 2011] Source does appear to be extended
[Mon Oct 10 03:35:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 03:35:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 03:35:32 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Mon Oct 10 03:35:32 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.978
[Mon Oct 10 03:35:32 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.50"
[Mon Oct 10 03:35:32 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src8.ximg exists
[Mon Oct 10 03:35:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src8.csv
[Mon Oct 10 03:35:32 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src8_1.ximg exists
[Mon Oct 10 03:35:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src8.csv
[Mon Oct 10 03:35:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01956_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 03:35:33 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Mon Oct 10 03:35:33 2011] fullrun_ccd7_acisf01956_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Oct 10 03:35:33 2011] Fit fullrun_ccd7_acisf01956_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Oct 10 03:35:42 2011] Spatial fit model total counts = 55.092600, observed total counts = 54.000000
[Mon Oct 10 03:35:42 2011] Offset between fit and detection position for source 10 = 0.009508 pixels
[Mon Oct 10 03:35:42 2011] 54.521000 total counts/ 16.622000 bgd. counts: snr = 9.295786
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.009508 pixels
  Position = (750.7, 359.8) = 19 34 50.96 -52 50 21.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 37.9 +/- 7.4
  Background counts = 16.6
  Rate = 0.0008 +/- 0.0002
[Mon Oct 10 03:35:42 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 03:35:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 03:35:42 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 03:35:42 2011] Source does appear to be extended
[Mon Oct 10 03:35:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 03:37:19 2011] Not overwriting source region fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_src.reg
[Mon Oct 10 03:37:19 2011] Extracting stamp from image fullrun_ccd7_acisf01956_pi14-548_cl_sm2.00.img.gz, (727, 336) - (774, 383)
[Mon Oct 10 03:37:19 2011] Writing fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10.gif
[Mon Oct 10 03:37:39 2011] ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_src.evt and ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Oct 10 03:37:39 2011] Size of ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_src.evt.gz[events] = 41 counts
[Mon Oct 10 03:37:39 2011] Mean chipx,y = (338.24, 727.20)
[Mon Oct 10 03:37:39 2011] Mean tdetx,y = (4255.24, 2429.20)
[Mon Oct 10 03:37:39 2011] chipx,y range = (322.00-355.00, 711.00-747.00)
[Mon Oct 10 03:37:39 2011] Size of ../../acisf01956/products/events/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 45 counts
[Mon Oct 10 03:37:39 2011] ../../acisf01956/products/images/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_src.img and ../../acisf01956/products/images/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Oct 10 03:37:39 2011] ../../acisf01956/products/spectra/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_src.pi and ../../acisf01956/products/spectra/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Oct 10 03:37:39 2011] Not generating rmf since there are only 37 counts
[Mon Oct 10 03:37:42 2011] ../../acisf01956/products/lightcurves/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_src.lc and ../../acisf01956/products/lightcurves/fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Oct 10 03:38:34 2011] 242.324
[Mon Oct 10 03:38:38 2011] Updating aperture counts using extracted products
[Mon Oct 10 03:38:38 2011] Error reading totcts from fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Oct 10 03:38:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 03:38:38 2011] Using photon index=1.80, rate=0.000797, arf fullrun_ccd7_acisf01956_pi14-548_pass1_cl_src10.arf
[Mon Oct 10 03:38:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 03:38:38 2011] Updating source flux to 5.1e-15
[Mon Oct 10 03:39:05 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting