[Mon Oct 10 03:33:32 2011] Detection parameters:
  Position = (598.5, 309.7) = 19 35 0.93 -52 59 18.1
  Extent = 2.6" x 2.1", rotation angle = 136 degrees
  Source counts = 486.1 +/- 23.3
  Background counts = 58.9
  Rate = 0.01 +/- 0.0005

[Mon Oct 10 03:33:32 2011] Off-axis axis estimate = 7.99'
[Mon Oct 10 03:34:59 2011] Using EEF radius (= 2.82 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 03:34:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 03:34:59 2011] Initial guess for spatial extent in simple fitting = 2.82"
[Mon Oct 10 03:34:59 2011] source mask rpix=5.7, npix_max = 155, mask sum = 169, frac = 1.088
[Mon Oct 10 03:34:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.82"
[Mon Oct 10 03:34:59 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 10 03:34:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 03:34:59 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 10 03:34:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 03:34:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 03:34:59 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 10 03:34:59 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 10 03:34:59 2011] Fit fullrun_ccd6_acisf01956_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 10 03:35:09 2011] Spatial fit model total counts = 554.695000, observed total counts = 554.000000
[Mon Oct 10 03:35:09 2011] Offset between fit and detection position for source 27 = 0.840731 pixels
[Mon Oct 10 03:35:09 2011] 554.887800 total counts/ 25.236800 bgd. counts: snr = 105.432051
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.840731 pixels
  Position = (598.9, 310.5) = 19 35 0.94 -52 59 17.9
  Extent = 3.5 (3.3-3.7)", rotation angle = 0
  Source counts = 529.7 +/- 23.6
  Background counts = 25.2
  Rate = 0.01 +/- 0.0005
[Mon Oct 10 03:35:09 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 03:35:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 03:35:09 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 03:35:09 2011] Source does appear to be extended
[Mon Oct 10 03:35:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 03:35:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 03:35:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 03:35:29 2011] Initial guess for spatial extent in simple fitting = 3.52"
[Mon Oct 10 03:35:29 2011] source mask rpix=7.1, npix_max = 233, mask sum = 240, frac = 1.027
[Mon Oct 10 03:35:29 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.52"
[Mon Oct 10 03:35:29 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 10 03:35:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 03:35:29 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 10 03:35:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 03:35:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 03:35:30 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 10 03:35:30 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 10 03:35:30 2011] Fit fullrun_ccd6_acisf01956_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 10 03:35:39 2011] Spatial fit model total counts = 585.397000, observed total counts = 585.000000
[Mon Oct 10 03:35:39 2011] Offset between fit and detection position for source 27 = 0.071075 pixels
[Mon Oct 10 03:35:39 2011] 585.614900 total counts/ 68.680900 bgd. counts: snr = 62.375941
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.071075 pixels
  Position = (598.8, 310.5) = 19 35 0.94 -52 59 17.9
  Extent = 3.4 (3.2-3.6)", rotation angle = 0
  Source counts = 516.9 +/- 24.2
  Background counts = 68.7
  Rate = 0.01 +/- 0.0005
[Mon Oct 10 03:35:39 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 03:35:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 03:35:39 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 03:35:39 2011] Source does appear to be extended
[Mon Oct 10 03:35:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 03:36:18 2011] Not overwriting source region fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_src.reg
[Mon Oct 10 03:36:18 2011] Extracting stamp from image fullrun_ccd6_acisf01956_pi14-548_cl_sm2.00.img.gz, (441, 153) - (756, 468)
[Mon Oct 10 03:36:18 2011] Writing fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27.gif
[Mon Oct 10 03:36:19 2011] ../../acisf01956/products/events/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_src.evt and ../../acisf01956/products/events/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Mon Oct 10 03:36:19 2011] Size of ../../acisf01956/products/events/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_src.evt.gz[events] = 564 counts
[Mon Oct 10 03:36:19 2011] Mean chipx,y = (286.66, 578.47)
[Mon Oct 10 03:36:19 2011] Mean tdetx,y = (3161.66, 2280.47)
[Mon Oct 10 03:36:19 2011] chipx,y range = (252.00-321.00, 546.00-620.00)
[Mon Oct 10 03:36:19 2011] Size of ../../acisf01956/products/events/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 503 counts
[Mon Oct 10 03:36:19 2011] ../../acisf01956/products/images/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_src.img and ../../acisf01956/products/images/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Mon Oct 10 03:36:19 2011] ../../acisf01956/products/spectra/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_src.pi and ../../acisf01956/products/spectra/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Mon Oct 10 03:36:22 2011] ../../acisf01956/products/lightcurves/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_src.lc and ../../acisf01956/products/lightcurves/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Mon Oct 10 03:37:18 2011] Keeping rmf generated by specextract
[Mon Oct 10 03:37:18 2011] 184.937
[Mon Oct 10 03:38:37 2011] Updating aperture counts using extracted products
[Mon Oct 10 03:38:37 2011] Error reading totcts from fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_src.pi.gz
[Mon Oct 10 03:38:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 03:38:38 2011] Using photon index=1.80, rate=0.0108, arf fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27.arf
[Mon Oct 10 03:38:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 03:38:38 2011] Updating source flux to 1.1e-13
[Mon Oct 10 03:39:05 2011] Reading fit data from acisf01956/analysis//spectral/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_pl.csv
[Mon Oct 10 03:39:05 2011] Spectral fit parameter nH value = 6.43386e+13
[Mon Oct 10 03:39:05 2011] Spectral fit parameter PhoIndex value = 1.73282
[Mon Oct 10 03:39:05 2011] Failed to get F(0.3-8.0) from acisf01956/analysis//spectral/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27_pl.csv, possibly due to different flux energy range selected
[Mon Oct 10 03:39:05 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 03:39:05 2011] Using Nh = 6.4e+13, photon index=1.73, rate=0.0108, arf fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src27.arf
[Mon Oct 10 03:39:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 03:39:05 2011] Updating source flux to 1.2e-13