[Mon Oct 10 03:33:31 2011] Detection parameters:
  Position = (670.0, 772.4) = 19 34 57.04 -52 55 30.4
  Extent = 0.8" x 0.6", rotation angle = 153 degrees
  Source counts = 10.9 +/- 3.6
  Background counts = 2.1
  Rate = 0.0002 +/- 8e-05

[Mon Oct 10 03:33:32 2011] Off-axis axis estimate = 4.27'
[Mon Oct 10 03:34:59 2011] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 03:34:59 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Mon Oct 10 03:34:59 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897
[Mon Oct 10 03:34:59 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.92"
[Mon Oct 10 03:34:59 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src15.ximg exists
[Mon Oct 10 03:34:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src15.csv
[Mon Oct 10 03:34:59 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Oct 10 03:34:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src15.csv
[Mon Oct 10 03:34:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01956_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 03:35:00 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Oct 10 03:35:00 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Oct 10 03:35:00 2011] Fit fullrun_ccd6_acisf01956_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Oct 10 03:35:09 2011] Spatial fit model total counts = 23.734900, observed total counts = 24.000000
[Mon Oct 10 03:35:09 2011] Offset between fit and detection position for source 23 = 3.081750 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 3.081750 pixels
  Position = (673.0, 773.2) = 19 34 56.90 -52 55 30.3
  Extent = 1.6 (1.0-1.8)", rotation angle = 0
  Source counts = 22.5 +/- 4.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Mon Oct 10 03:35:09 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 03:35:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 03:35:09 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 03:35:09 2011] Source does appear to be extended
[Mon Oct 10 03:35:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 03:35:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 03:35:29 2011] Initial guess for spatial extent in simple fitting = 1.55"
[Mon Oct 10 03:35:29 2011] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.048
[Mon Oct 10 03:35:29 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 1.55"
[Mon Oct 10 03:35:30 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src15.ximg exists
[Mon Oct 10 03:35:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src15.csv
[Mon Oct 10 03:35:30 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Oct 10 03:35:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src15.csv
[Mon Oct 10 03:35:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01956_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 03:35:31 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Oct 10 03:35:31 2011] fullrun_ccd6_acisf01956_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Oct 10 03:35:32 2011] Fit fullrun_ccd6_acisf01956_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Oct 10 03:35:39 2011] Spatial fit model total counts = 27.496600, observed total counts = 29.000000
[Mon Oct 10 03:35:39 2011] Offset between fit and detection position for source 23 = 5.034050 pixels
[Mon Oct 10 03:35:39 2011] 29.932240 total counts/ 1.598440 bgd. counts: snr = 22.410764
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 5.034050 pixels
  Position = (668.0, 772.6) = 19 34 57.18 -52 55 30.6
  Extent = 2.0 (0.7-2.8)", rotation angle = 0
  Source counts = 28.3 +/- 5.5
  Background counts = 1.6
  Rate = 0.0006 +/- 0.0001
[Mon Oct 10 03:35:39 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 03:35:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 03:35:39 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 03:35:39 2011] Source does appear to be extended
[Mon Oct 10 03:35:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 03:36:18 2011] Not overwriting source region fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_src.reg
[Mon Oct 10 03:36:18 2011] Extracting stamp from image fullrun_ccd6_acisf01956_pi14-548_cl_sm2.00.img.gz, (577, 682) - (759, 863)
[Mon Oct 10 03:36:18 2011] Writing fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23.gif
[Mon Oct 10 03:36:57 2011] ../../acisf01956/products/events/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_src.evt and ../../acisf01956/products/events/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Mon Oct 10 03:36:57 2011] Size of ../../acisf01956/products/events/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_src.evt.gz[events] = 57 counts
[Mon Oct 10 03:36:57 2011] Mean chipx,y = (752.49, 634.95)
[Mon Oct 10 03:36:57 2011] Mean tdetx,y = (3627.49, 2336.95)
[Mon Oct 10 03:36:57 2011] chipx,y range = (724.00-776.00, 609.00-664.00)
[Mon Oct 10 03:36:57 2011] Size of ../../acisf01956/products/events/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 199 counts
[Mon Oct 10 03:36:57 2011] ../../acisf01956/products/images/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_src.img and ../../acisf01956/products/images/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Mon Oct 10 03:36:57 2011] ../../acisf01956/products/spectra/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_src.pi and ../../acisf01956/products/spectra/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Mon Oct 10 03:36:57 2011] Not generating rmf since there are only 28 counts
[Mon Oct 10 03:37:00 2011] ../../acisf01956/products/lightcurves/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_src.lc and ../../acisf01956/products/lightcurves/fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Mon Oct 10 03:37:18 2011] 206.217
[Mon Oct 10 03:38:38 2011] Updating aperture counts using extracted products
[Mon Oct 10 03:38:38 2011] Error reading totcts from fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23_src.pi.gz
[Mon Oct 10 03:38:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 03:38:38 2011] Using photon index=1.80, rate=0.000595, arf fullrun_ccd6_acisf01956_pi14-548_pass1_cl_src23.arf
[Mon Oct 10 03:38:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 03:38:38 2011] Updating source flux to 5.8e-15
[Mon Oct 10 03:38:56 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting