[Fri Sep 23 06:43:36 2011] Detection parameters:
  Position = (1046.7, 273.2) = 15 55 40.34 -55 7 34.2
  Extent = 3.2" x 2.4", rotation angle = 60 degrees
  Source counts = 50.7 +/- 11.2
  Background counts = 74.3
  Rate = 0.001 +/- 0.0002

[Fri Sep 23 06:43:36 2011] Off-axis axis estimate = 12.46'
[Fri Sep 23 06:44:55 2011] Using EEF radius (= 6.94 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:44:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 06:44:55 2011] Initial guess for spatial extent in simple fitting = 6.94"
[Fri Sep 23 06:44:55 2011] source mask rpix=14.1, npix_max = 853, mask sum = 841, frac = 0.985
[Fri Sep 23 06:44:55 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 6.94"
[Fri Sep 23 06:44:56 2011] fullrun_ccd6_acisf01955_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 06:44:56 2011] fullrun_ccd6_acisf01955_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 06:44:56 2011] Fit fullrun_ccd6_acisf01955_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Sep 23 06:44:56 2011] fullrun_ccd6_acisf01955_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 06:44:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01955_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri Sep 23 06:44:56 2011] fullrun_ccd6_acisf01955_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 06:44:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01955_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri Sep 23 06:44:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01955_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01955_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:45:11 2011] Spatial fit model total counts = 250.841000, observed total counts = 235.000000
[Fri Sep 23 06:45:11 2011] Offset between fit and detection position for source 2 = 2.993354 pixels
[Fri Sep 23 06:45:11 2011] 250.495000 total counts/ 139.093000 bgd. counts: snr = 9.445835
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.993354 pixels
  Position = (1049.7, 273.3) = 15 55 40.20 -55 7 34.5
  Extent = 10.3 (5.0-13.9)" x 7.2 (4.3-11.2)", rotation angle = 89 (87-90) degrees
  Source counts = 111.4 +/- 15.8
  Background counts = 139.1
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 06:45:11 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 06:45:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 06:45:11 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 06:45:11 2011] Source does appear to be extended
[Fri Sep 23 06:45:11 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.44
[Fri Sep 23 06:45:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:45:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 06:45:39 2011] Initial guess for spatial extent in simple fitting = 8.79"
[Fri Sep 23 06:45:39 2011] source mask rpix=17.9, npix_max = 1347, mask sum = 1355, frac = 1.005
[Fri Sep 23 06:45:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.79"
[Fri Sep 23 06:45:40 2011] fullrun_ccd6_acisf01955_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 06:45:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01955_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 06:45:40 2011] fullrun_ccd6_acisf01955_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 06:45:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01955_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 06:45:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01955_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01955_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:45:40 2011] fullrun_ccd6_acisf01955_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 06:45:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01955_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Sep 23 06:45:40 2011] fullrun_ccd6_acisf01955_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 06:45:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01955_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Sep 23 06:45:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01955_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01955_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:45:57 2011] Spatial fit model total counts = 352.014000, observed total counts = 293.000000
[Fri Sep 23 06:45:57 2011] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep 23 06:45:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 06:45:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 06:45:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 06:45:57 2011] Source does appear to be extended
[Fri Sep 23 06:45:57 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.44
[Fri Sep 23 06:52:53 2011] Not overwriting source region fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 23 06:52:53 2011] Extracting stamp from image fullrun_ccd6_acisf01955_pi14-548_cl_sm2.00.img.gz, (577, 0) - (1269, 746)
[Fri Sep 23 06:52:53 2011] Writing fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2.gif
[Fri Sep 23 06:52:54 2011] ../../acisf01955/products/events/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_src.evt and ../../acisf01955/products/events/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 23 06:52:55 2011] Size of ../../acisf01955/products/events/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_src.evt.gz[events] = 251 counts
[Fri Sep 23 06:52:55 2011] Mean chipx,y = (287.73, 991.20)
[Fri Sep 23 06:52:55 2011] Mean tdetx,y = (3162.73, 2693.20)
[Fri Sep 23 06:52:55 2011] chipx,y range = (188.00-376.00, 927.00-1023.00)
[Fri Sep 23 06:52:55 2011] Size of ../../acisf01955/products/events/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 1937 counts
[Fri Sep 23 06:52:55 2011] ../../acisf01955/products/images/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_src.img and ../../acisf01955/products/images/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 23 06:52:55 2011] ../../acisf01955/products/spectra/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_src.pi and ../../acisf01955/products/spectra/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 23 06:52:58 2011] ../../acisf01955/products/lightcurves/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_src.lc and ../../acisf01955/products/lightcurves/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 23 06:52:58 2011] Keeping rmf generated by specextract
[Fri Sep 23 06:52:58 2011] 150.968
[Fri Sep 23 06:53:15 2011] Updating aperture counts using extracted products
[Fri Sep 23 06:53:15 2011] Error reading totcts from fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 23 06:53:15 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 06:53:15 2011] Using photon index=1.80, rate=0.00226, arf fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2.arf
[Fri Sep 23 06:53:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 06:53:15 2011] Updating source flux to 4.5e-14
[Fri Sep 23 06:54:10 2011] Flag p found in src. 2 procflags, skipping spectral fitting
[Fri Sep 23 06:54:17 2011] Reading fit data from acisf01955/analysis//spectral/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_pl.csv
[Fri Sep 23 06:54:17 2011] Spectral fit parameter nH value = 1.24983e+22
[Fri Sep 23 06:54:17 2011] Spectral fit parameter PhoIndex value = 2.37914
[Fri Sep 23 06:54:17 2011] Failed to get F(0.3-8.0) from acisf01955/analysis//spectral/fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 06:54:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 06:54:17 2011] Using Nh = 1.2e+22, photon index=2.38, rate=0.00226, arf fullrun_ccd6_acisf01955_pi14-548_pass1_cl_src2.arf
[Fri Sep 23 06:54:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 06:54:17 2011] Updating source flux to 3.5e-14