[Fri Sep 23 06:43:34 2011] Detection parameters:
  Position = (673.6, 225.7) = 15 54 27.02 -55 1 23.6
  Extent = 0.5" x 0.5", rotation angle = 150 degrees
  Source counts = 43.2 +/- 6.8
  Background counts = 2.8
  Rate = 0.0009 +/- 0.0001

[Fri Sep 23 06:43:36 2011] Off-axis axis estimate = 1.36'
[Fri Sep 23 06:44:53 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:44:53 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Sep 23 06:44:53 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.361
[Fri Sep 23 06:44:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Fri Sep 23 06:44:54 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 06:44:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 06:44:54 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 06:44:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 06:44:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:44:55 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 06:44:55 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 06:44:55 2011] Fit fullrun_ccd3_acisf01955_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 06:45:10 2011] Spatial fit model total counts = 49.715000, observed total counts = 50.000000
[Fri Sep 23 06:45:10 2011] Offset between fit and detection position for source 33 = 0.558718 pixels
[Fri Sep 23 06:45:10 2011] 49.955400 total counts/ 9.850000 bgd. counts: snr = 12.778643
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.558718 pixels
  Position = (674.1, 225.9) = 15 54 27.02 -55 1 23.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 40.1 +/- 7.1
  Background counts = 9.8
  Rate = 0.0008 +/- 0.0001
[Fri Sep 23 06:45:11 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 06:45:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 06:45:11 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 06:45:11 2011] Source does appear to be extended
[Fri Sep 23 06:45:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:45:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:45:38 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Sep 23 06:45:38 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.057
[Fri Sep 23 06:45:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.47"
[Fri Sep 23 06:45:38 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 06:45:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 06:45:38 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 06:45:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 06:45:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:45:39 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 06:45:39 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 06:45:39 2011] Fit fullrun_ccd3_acisf01955_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 06:45:57 2011] Spatial fit model total counts = 48.636700, observed total counts = 49.000000
[Fri Sep 23 06:45:57 2011] Offset between fit and detection position for source 33 = 0.022229 pixels
[Fri Sep 23 06:45:57 2011] 48.557710 total counts/ 8.080210 bgd. counts: snr = 14.239750
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.022229 pixels
  Position = (674.2, 225.9) = 15 54 27.02 -55 1 23.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 40.5 +/- 7.0
  Background counts = 8.1
  Rate = 0.0008 +/- 0.0001
[Fri Sep 23 06:45:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 06:45:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 06:45:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 06:45:57 2011] Source does appear to be extended
[Fri Sep 23 06:45:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:50:09 2011] Not overwriting source region fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_src.reg
[Fri Sep 23 06:50:09 2011] Extracting stamp from image fullrun_ccd3_acisf01955_pi14-548_cl_sm2.00.img.gz, (652, 203) - (697, 248)
[Fri Sep 23 06:50:09 2011] Writing fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33.gif
[Fri Sep 23 06:50:11 2011] ../../acisf01955/products/events/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_src.evt and ../../acisf01955/products/events/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_bgd.evt exist, delete to re-create
[Fri Sep 23 06:50:11 2011] Size of ../../acisf01955/products/events/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_src.evt.gz[events] = 44 counts
[Fri Sep 23 06:50:11 2011] Mean chipx,y = (668.61, 901.27)
[Fri Sep 23 06:50:11 2011] Mean tdetx,y = (4230.73, 3729.61)
[Fri Sep 23 06:50:11 2011] chipx,y range = (648.00-684.00, 886.00-920.00)
[Fri Sep 23 06:50:11 2011] Size of ../../acisf01955/products/events/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 18 counts
[Fri Sep 23 06:50:11 2011] ../../acisf01955/products/images/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_src.img and ../../acisf01955/products/images/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_bgd.img exist, delete to re-create
[Fri Sep 23 06:50:11 2011] ../../acisf01955/products/spectra/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_src.pi and ../../acisf01955/products/spectra/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_bgd.pi exist, delete to re-create
[Fri Sep 23 06:50:11 2011] Not generating rmf since there are only 40 counts
[Fri Sep 23 06:50:14 2011] ../../acisf01955/products/lightcurves/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_src.lc and ../../acisf01955/products/lightcurves/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_bgd.lc exist, delete to re-create
[Fri Sep 23 06:52:50 2011] 201.841
[Fri Sep 23 06:53:15 2011] Updating aperture counts using extracted products
[Fri Sep 23 06:53:15 2011] Error reading totcts from fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_src.pi.gz
[Fri Sep 23 06:53:15 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 06:53:15 2011] Using photon index=1.80, rate=0.000821, arf fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33.arf
[Fri Sep 23 06:53:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 06:53:15 2011] Updating source flux to 1.3e-14
[Fri Sep 23 06:54:09 2011] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 06:54:10 2011] acisf01955/analysis//spectral/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete