[Fri Sep 23 06:43:30 2011] Detection parameters:
  Position = (789.5, 898.4) = 15 54 20.39 -54 55 52.7
  Extent = 1.3" x 1.1", rotation angle = 173 degrees
  Source counts = 35.0 +/- 6.3
  Background counts = 5.0
  Rate = 0.0007 +/- 0.0001

[Fri Sep 23 06:43:36 2011] Off-axis axis estimate = 6.57'
[Fri Sep 23 06:44:53 2011] Using EEF radius (= 1.93 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:44:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 06:44:53 2011] Initial guess for spatial extent in simple fitting = 1.93"
[Fri Sep 23 06:44:53 2011] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.033
[Fri Sep 23 06:44:53 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.93"
[Fri Sep 23 06:44:54 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 23 06:44:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 06:44:54 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 23 06:44:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 06:44:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01955_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:44:55 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 23 06:44:55 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 23 06:44:55 2011] Fit fullrun_ccd3_acisf01955_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 23 06:45:10 2011] Spatial fit model total counts = 41.626800, observed total counts = 42.000000
[Fri Sep 23 06:45:10 2011] Offset between fit and detection position for source 15 = 0.895827 pixels
[Fri Sep 23 06:45:10 2011] 41.833310 total counts/ 5.945610 bgd. counts: snr = 14.717953
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.895827 pixels
  Position = (789.6, 899.3) = 15 54 20.41 -54 55 52.5
  Extent = 1.5 (1.0-1.8)", rotation angle = 0
  Source counts = 35.9 +/- 6.5
  Background counts = 5.9
  Rate = 0.0007 +/- 0.0001
[Fri Sep 23 06:45:11 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 06:45:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 06:45:11 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 06:45:11 2011] Source does appear to be extended
[Fri Sep 23 06:45:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:45:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:45:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 06:45:38 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Fri Sep 23 06:45:38 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Fri Sep 23 06:45:38 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.47"
[Fri Sep 23 06:45:38 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 23 06:45:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src3.csv
[Fri Sep 23 06:45:38 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 23 06:45:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src3.csv
[Fri Sep 23 06:45:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01955_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:45:39 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 23 06:45:39 2011] fullrun_ccd3_acisf01955_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 23 06:45:39 2011] Fit fullrun_ccd3_acisf01955_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 23 06:45:57 2011] Spatial fit model total counts = 38.774800, observed total counts = 39.000000
[Fri Sep 23 06:45:57 2011] Offset between fit and detection position for source 15 = 0.227547 pixels
[Fri Sep 23 06:45:57 2011] 39.227860 total counts/ 8.089360 bgd. counts: snr = 10.948147
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.227547 pixels
  Position = (789.4, 899.2) = 15 54 20.42 -54 55 52.5
  Extent = 1.3 (0.7-1.6)", rotation angle = 0
  Source counts = 31.1 +/- 6.3
  Background counts = 8.1
  Rate = 0.0006 +/- 0.0001
[Fri Sep 23 06:45:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 06:45:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 06:45:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 06:45:57 2011] Source does appear to be extended
[Fri Sep 23 06:45:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:50:09 2011] Not overwriting source region fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_src.reg
[Fri Sep 23 06:50:09 2011] Extracting stamp from image fullrun_ccd3_acisf01955_pi14-548_cl_sm2.00.img.gz, (730, 840) - (848, 958)
[Fri Sep 23 06:50:09 2011] Writing fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15.gif
[Fri Sep 23 06:50:19 2011] ../../acisf01955/products/events/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_src.evt and ../../acisf01955/products/events/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Fri Sep 23 06:50:19 2011] Size of ../../acisf01955/products/events/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_src.evt.gz[events] = 39 counts
[Fri Sep 23 06:50:19 2011] Mean chipx,y = (595.13, 224.08)
[Fri Sep 23 06:50:19 2011] Mean tdetx,y = (4907.92, 3656.13)
[Fri Sep 23 06:50:19 2011] chipx,y range = (575.00-615.00, 199.00-241.00)
[Fri Sep 23 06:50:19 2011] Size of ../../acisf01955/products/events/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 54 counts
[Fri Sep 23 06:50:19 2011] ../../acisf01955/products/images/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_src.img and ../../acisf01955/products/images/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Fri Sep 23 06:50:19 2011] ../../acisf01955/products/spectra/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_src.pi and ../../acisf01955/products/spectra/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Fri Sep 23 06:50:19 2011] Not generating rmf since there are only 31 counts
[Fri Sep 23 06:50:22 2011] ../../acisf01955/products/lightcurves/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_src.lc and ../../acisf01955/products/lightcurves/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Fri Sep 23 06:52:51 2011] 178.649
[Fri Sep 23 06:53:15 2011] Updating aperture counts using extracted products
[Fri Sep 23 06:53:15 2011] Error reading totcts from fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_src.pi.gz
[Fri Sep 23 06:53:15 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 06:53:15 2011] Using photon index=1.80, rate=0.000631, arf fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15.arf
[Fri Sep 23 06:53:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 06:53:15 2011] Updating source flux to 1.1e-14
[Fri Sep 23 06:54:09 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 06:54:10 2011] acisf01955/analysis//spectral/fullrun_ccd3_acisf01955_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete