[Fri Sep 23 06:43:25 2011] Detection parameters:
  Position = (828.6, 716.3) = 15 54 34.71 -55 5 33.7
  Extent = 0.8" x 0.5", rotation angle = 85 degrees
  Source counts = 33.0 +/- 6.3
  Background counts = 7.0
  Rate = 0.0007 +/- 0.0001

[Fri Sep 23 06:43:29 2011] Off-axis axis estimate = 3.68'
[Fri Sep 23 06:44:52 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:44:52 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Sep 23 06:44:52 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Fri Sep 23 06:44:52 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.74"
[Fri Sep 23 06:44:52 2011] fullrun_ccd2_acisf01955_pi14-548_cl_pass0_src12.ximg exists
[Fri Sep 23 06:44:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01955_pi14-548_cl_pass0_src12.csv
[Fri Sep 23 06:44:52 2011] fullrun_ccd2_acisf01955_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Sep 23 06:44:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01955_pi14-548_cl_pass0_src12.csv
[Fri Sep 23 06:44:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01955_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01955_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:44:53 2011] fullrun_ccd2_acisf01955_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Sep 23 06:44:53 2011] fullrun_ccd2_acisf01955_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Sep 23 06:44:53 2011] Fit fullrun_ccd2_acisf01955_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Sep 23 06:45:07 2011] Source 10 is offset by 5.660146 and 5.310293 pixels which is larger than
2 X fitted extent = 0.751281 x 0.751281, not incorporating fit results
[Fri Sep 23 06:45:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 06:45:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 06:45:07 2011] Assessing source extent using major
[Fri Sep 23 06:45:07 2011] Source does appear to be extended
[Fri Sep 23 06:45:07 2011] Computing asymmetry using major and minor axis, asym = 1.57
[Fri Sep 23 06:45:07 2011] Source is asymmetric
[Fri Sep 23 06:45:36 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:45:36 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Sep 23 06:45:36 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Fri Sep 23 06:45:36 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.74"
[Fri Sep 23 06:45:37 2011] fullrun_ccd2_acisf01955_pi14-548_cl_pass1_src12.ximg exists
[Fri Sep 23 06:45:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01955_pi14-548_cl_pass1_src12.csv
[Fri Sep 23 06:45:37 2011] fullrun_ccd2_acisf01955_pi14-548_cl_pass1_src12_1.ximg exists
[Fri Sep 23 06:45:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01955_pi14-548_cl_pass1_src12.csv
[Fri Sep 23 06:45:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01955_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01955_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:45:37 2011] fullrun_ccd2_acisf01955_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri Sep 23 06:45:37 2011] fullrun_ccd2_acisf01955_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Sep 23 06:45:37 2011] Fit fullrun_ccd2_acisf01955_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Sep 23 06:45:52 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 62.728643 pixels away
[Fri Sep 23 06:45:52 2011] Source 10 is offset by 3.983683 and -6.710195 pixels which is larger than
2 X fitted extent = 0.751281 x 0.751281, not incorporating fit results
[Fri Sep 23 06:45:52 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 169.919256 pixels away
[Fri Sep 23 06:45:52 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 06:45:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 06:45:52 2011] Assessing source extent using major
[Fri Sep 23 06:45:52 2011] Source does appear to be extended
[Fri Sep 23 06:45:52 2011] Computing asymmetry using major and minor axis, asym = 1.57
[Fri Sep 23 06:45:52 2011] Source is asymmetric
[Fri Sep 23 06:48:47 2011] Not overwriting source region fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_src.reg
[Fri Sep 23 06:48:47 2011] Extracting stamp from image fullrun_ccd2_acisf01955_pi14-548_cl_sm2.00.img.gz, (793, 681) - (864, 752)
[Fri Sep 23 06:48:47 2011] Writing fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10.gif
[Fri Sep 23 06:49:32 2011] ../../acisf01955/products/events/fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_src.evt and ../../acisf01955/products/events/fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Sep 23 06:49:32 2011] Size of ../../acisf01955/products/events/fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_src.evt.gz[events] = 43 counts
[Fri Sep 23 06:49:32 2011] Mean chipx,y = (350.65, 639.88)
[Fri Sep 23 06:49:32 2011] Mean tdetx,y = (3700.88, 3735.35)
[Fri Sep 23 06:49:32 2011] chipx,y range = (331.00-367.00, 618.00-661.00)
[Fri Sep 23 06:49:32 2011] Size of ../../acisf01955/products/events/fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 122 counts
[Fri Sep 23 06:49:32 2011] ../../acisf01955/products/images/fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_src.img and ../../acisf01955/products/images/fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Sep 23 06:49:32 2011] ../../acisf01955/products/spectra/fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_src.pi and ../../acisf01955/products/spectra/fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Sep 23 06:49:32 2011] Not generating rmf since there are only 33 counts
[Fri Sep 23 06:49:35 2011] ../../acisf01955/products/lightcurves/fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_src.lc and ../../acisf01955/products/lightcurves/fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Sep 23 06:50:08 2011] 197.436
[Fri Sep 23 06:53:14 2011] Updating aperture counts using extracted products
[Fri Sep 23 06:53:14 2011] Error reading totcts from fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Sep 23 06:53:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 06:53:14 2011] Using photon index=1.80, rate=0.00067, arf fullrun_ccd2_acisf01955_pi14-548_pass1_cl_src10.arf
[Fri Sep 23 06:53:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 06:53:14 2011] Updating source flux to 1.1e-14
[Fri Sep 23 06:53:30 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting