[Fri Sep 23 06:43:23 2011] Detection parameters:
  Position = (161.5, 690.1) = 15 53 59.57 -54 59 50.8
  Extent = 0.9" x 0.5", rotation angle = 27 degrees
  Source counts = 11.5 +/- 3.6
  Background counts = 1.5
  Rate = 0.0002 +/- 7e-05

[Fri Sep 23 06:43:24 2011] Off-axis axis estimate = 4.02'
[Fri Sep 23 06:44:51 2011] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:44:51 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Fri Sep 23 06:44:51 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.032
[Fri Sep 23 06:44:51 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.84"
[Fri Sep 23 06:44:52 2011] fullrun_ccd1_acisf01955_pi14-548_cl_pass0_src10.ximg exists
[Fri Sep 23 06:44:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01955_pi14-548_cl_pass0_src10.csv
[Fri Sep 23 06:44:52 2011] fullrun_ccd1_acisf01955_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Sep 23 06:44:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01955_pi14-548_cl_pass0_src10.csv
[Fri Sep 23 06:44:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf01955_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf01955_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:44:52 2011] fullrun_ccd1_acisf01955_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Sep 23 06:44:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01955_pi14-548_cl_pass0_tfrozen_src10.csv
[Fri Sep 23 06:44:52 2011] fullrun_ccd1_acisf01955_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Sep 23 06:44:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01955_pi14-548_cl_pass0_tfrozen_src10.csv
[Fri Sep 23 06:44:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf01955_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf01955_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 06:45:04 2011] Spatial fit model total counts = 12.488900, observed total counts = 14.000000
[Fri Sep 23 06:45:04 2011] Offset between fit and detection position for source 10 = 1.193154 pixels
[Fri Sep 23 06:45:04 2011] 12.259708 total counts/ 0.000508 bgd. counts: snr = 543.927430
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.193154 pixels
  Position = (162.5, 690.8) = 15 53 59.55 -54 59 50.7
  Extent = 0.8 (0.4-1.1)", rotation angle = 0
  Source counts = 12.3 +/- 3.5
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Fri Sep 23 06:45:04 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 06:45:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 06:45:04 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 06:45:04 2011] Source does appear to be extended
[Fri Sep 23 06:45:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:45:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 06:45:35 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Fri Sep 23 06:45:35 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.036
[Fri Sep 23 06:45:35 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.83"
[Fri Sep 23 06:45:36 2011] fullrun_ccd1_acisf01955_pi14-548_cl_pass1_src10.ximg exists
[Fri Sep 23 06:45:36 2011] fullrun_ccd1_acisf01955_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Sep 23 06:45:36 2011] Fit fullrun_ccd1_acisf01955_pi14-548_cl_pass1_src10 appears to have run properly
[Fri Sep 23 06:45:36 2011] fullrun_ccd1_acisf01955_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep 23 06:45:36 2011] fullrun_ccd1_acisf01955_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep 23 06:45:36 2011] Fit fullrun_ccd1_acisf01955_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Sep 23 06:45:50 2011] Spatial fit model total counts = 14.998500, observed total counts = 15.000000
[Fri Sep 23 06:45:50 2011] Offset between fit and detection position for source 10 = 0.089670 pixels
[Fri Sep 23 06:45:50 2011] 15.159880 total counts/ 4.222780 bgd. counts: snr = 5.322344
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.089670 pixels
  Position = (162.4, 690.9) = 15 53 59.55 -54 59 50.7
  Extent = 0.7 (0.3-1.2)", rotation angle = 0
  Source counts = 10.9 +/- 3.9
  Background counts = 4.2
  Rate = 0.0002 +/- 8e-05
[Fri Sep 23 06:45:50 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 06:45:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 06:45:50 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 06:45:50 2011] Source does appear to be extended
[Fri Sep 23 06:45:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:47:30 2011] Not overwriting source region fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_src.reg
[Fri Sep 23 06:47:30 2011] Extracting stamp from image fullrun_ccd1_acisf01955_pi14-548_cl_sm2.00.img.gz, (128, 657) - (196, 725)
[Fri Sep 23 06:47:30 2011] Writing fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10.gif
[Fri Sep 23 06:48:03 2011] ../../acisf01955/products/events/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_src.evt and ../../acisf01955/products/events/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Sep 23 06:48:03 2011] Size of ../../acisf01955/products/events/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_src.evt.gz[events] = 13 counts
[Fri Sep 23 06:48:03 2011] Mean chipx,y = (32.46, 596.23)
[Fri Sep 23 06:48:03 2011] Mean tdetx,y = (4535.77, 4139.46)
[Fri Sep 23 06:48:03 2011] chipx,y range = (17.00-50.00, 580.00-609.00)
[Fri Sep 23 06:48:04 2011] Size of ../../acisf01955/products/events/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 18 counts
[Fri Sep 23 06:48:04 2011] ../../acisf01955/products/images/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_src.img and ../../acisf01955/products/images/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Sep 23 06:48:04 2011] ../../acisf01955/products/spectra/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_src.pi and ../../acisf01955/products/spectra/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Sep 23 06:48:04 2011] Not generating rmf since there are only 10 counts
[Fri Sep 23 06:48:07 2011] ../../acisf01955/products/lightcurves/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_src.lc and ../../acisf01955/products/lightcurves/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Sep 23 06:48:46 2011] 195.899
[Fri Sep 23 06:53:14 2011] Updating aperture counts using extracted products
[Fri Sep 23 06:53:14 2011] Error reading totcts from fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Sep 23 06:53:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 06:53:14 2011] Using photon index=1.80, rate=0.000222, arf fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10.arf
[Fri Sep 23 06:53:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 06:53:14 2011] Updating source flux to 3.7e-15
[Fri Sep 23 06:53:28 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 06:53:29 2011] acisf01955/analysis//spectral/fullrun_ccd1_acisf01955_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete