[Thu Oct 27 00:35:00 2011] Detection parameters:
  Position = (866.5, 1112.6) = 19 7 13.89 9 17 36.5
  Extent = 0.6" x 0.5", rotation angle = 110 degrees
  Source counts = 10.3 +/- 3.3
  Background counts = 0.7
  Rate = 0.0003 +/- 0.0001

[Thu Oct 27 00:35:01 2011] Off-axis axis estimate = 1.96'
[Thu Oct 27 00:35:54 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 00:35:54 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Thu Oct 27 00:35:54 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.204
[Thu Oct 27 00:35:54 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.43"
[Thu Oct 27 00:35:54 2011] fullrun_ccd3_acisf01954_pi14-548_cl_pass0_src8.ximg exists
[Thu Oct 27 00:35:54 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01954_pi14-548_cl_pass0_src8.csv
[Thu Oct 27 00:35:54 2011] fullrun_ccd3_acisf01954_pi14-548_cl_pass0_src8_1.ximg exists
[Thu Oct 27 00:35:54 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01954_pi14-548_cl_pass0_src8.csv
[Thu Oct 27 00:35:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01954_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01954_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 00:35:55 2011] fullrun_ccd3_acisf01954_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Thu Oct 27 00:35:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01954_pi14-548_cl_pass0_tfrozen_src8.csv
[Thu Oct 27 00:35:55 2011] fullrun_ccd3_acisf01954_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Oct 27 00:35:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01954_pi14-548_cl_pass0_tfrozen_src8.csv
[Thu Oct 27 00:35:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01954_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01954_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 00:36:02 2011] Spatial fit model total counts = 10.512300, observed total counts = 13.000000
[Thu Oct 27 00:36:02 2011] Offset between fit and detection position for source 15 = 0.709909 pixels
[Thu Oct 27 00:36:02 2011] 10.582700 total counts/ 1.128290 bgd. counts: snr = 8.900698
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.709909 pixels
  Position = (867.2, 1112.7) = 19 7 13.89 9 17 36.3
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 9.5 +/- 3.3
  Background counts = 1.1
  Rate = 0.0003 +/- 0.0001
[Thu Oct 27 00:36:02 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 00:36:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 00:36:02 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 00:36:02 2011] Source does appear to be extended
[Thu Oct 27 00:36:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 00:36:02 2011] Deleting source due to low Poisson probability 0.8