[Thu Oct 27 00:34:56 2011] Detection parameters:
  Position = (435.3, 247.8) = 19 7 17.13 9 22 16.0
  Extent = 0.7" x 0.5", rotation angle = 121 degrees
  Source counts = 16.3 +/- 4.1
  Background counts = 0.7
  Rate = 0.0005 +/- 0.0001

[Thu Oct 27 00:34:57 2011] Off-axis axis estimate = 2.83'
[Thu Oct 27 00:35:50 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 00:35:50 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Thu Oct 27 00:35:50 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.864
[Thu Oct 27 00:35:50 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.55"
[Thu Oct 27 00:35:51 2011] fullrun_ccd0_acisf01954_pi14-548_cl_pass0_src5.ximg exists
[Thu Oct 27 00:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01954_pi14-548_cl_pass0_src5.csv
[Thu Oct 27 00:35:52 2011] fullrun_ccd0_acisf01954_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Oct 27 00:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01954_pi14-548_cl_pass0_src5.csv
[Thu Oct 27 00:35:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01954_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01954_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 00:35:52 2011] fullrun_ccd0_acisf01954_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Oct 27 00:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01954_pi14-548_cl_pass0_tfrozen_src5.csv
[Thu Oct 27 00:35:52 2011] fullrun_ccd0_acisf01954_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Oct 27 00:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01954_pi14-548_cl_pass0_tfrozen_src5.csv
[Thu Oct 27 00:35:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01954_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01954_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 00:35:59 2011] Spatial fit model total counts = 15.543400, observed total counts = 18.000000
[Thu Oct 27 00:35:59 2011] Offset between fit and detection position for source 5 = 0.773119 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.773119 pixels
  Position = (435.7, 248.5) = 19 7 17.13 9 22 16.1
  Extent = 0.9 (0.7-1.3)" x 0.4 (0.3-0.6)", rotation angle = 60 (41-78) degrees
  Source counts = 15.9 +/- 4.0
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Thu Oct 27 00:35:59 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 00:35:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 00:35:59 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 00:35:59 2011] Source does appear to be extended
[Thu Oct 27 00:35:59 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Thu Oct 27 00:36:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 00:36:20 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Thu Oct 27 00:36:20 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.867
[Thu Oct 27 00:36:20 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.67"
[Thu Oct 27 00:36:22 2011] fullrun_ccd0_acisf01954_pi14-548_cl_pass1_src5.ximg exists
[Thu Oct 27 00:36:22 2011] fullrun_ccd0_acisf01954_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Oct 27 00:36:22 2011] Fit fullrun_ccd0_acisf01954_pi14-548_cl_pass1_src5 appears to have run properly
[Thu Oct 27 00:36:22 2011] fullrun_ccd0_acisf01954_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Oct 27 00:36:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01954_pi14-548_cl_pass1_tfrozen_src5.csv
[Thu Oct 27 00:36:22 2011] fullrun_ccd0_acisf01954_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Oct 27 00:36:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01954_pi14-548_cl_pass1_tfrozen_src5.csv
[Thu Oct 27 00:36:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01954_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01954_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 00:36:28 2011] Spatial fit model total counts = 17.076300, observed total counts = 18.000000
[Thu Oct 27 00:36:28 2011] Offset between fit and detection position for source 5 = 0.374202 pixels
[Thu Oct 27 00:36:28 2011] 17.466802 total counts/ 0.005202 bgd. counts: snr = 242.110415
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.374202 pixels
  Position = (435.9, 248.1) = 19 7 17.12 9 22 15.9
  Extent = 0.9 (0.6-1.2)" x 0.4 (0.3-0.6)", rotation angle = 59 (40-76) degrees
  Source counts = 17.5 +/- 4.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Thu Oct 27 00:36:28 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 00:36:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 00:36:28 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 00:36:28 2011] Source does appear to be extended
[Thu Oct 27 00:36:28 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Thu Oct 27 00:36:48 2011] Not overwriting source region fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_src.reg
[Thu Oct 27 00:36:48 2011] Extracting stamp from image fullrun_ccd0_acisf01954_pi14-548_cl_sm2.00.img.gz, (396, 208) - (476, 288)
[Thu Oct 27 00:36:48 2011] Writing fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5.gif
[Thu Oct 27 00:37:16 2011] ../../acisf01954/products/events/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_src.evt and ../../acisf01954/products/events/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu Oct 27 00:37:16 2011] Size of ../../acisf01954/products/events/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_src.evt.gz[events] = 16 counts
[Thu Oct 27 00:37:16 2011] Mean chipx,y = (761.50, 987.38)
[Thu Oct 27 00:37:16 2011] Mean tdetx,y = (4048.38, 4370.50)
[Thu Oct 27 00:37:16 2011] chipx,y range = (747.00-779.00, 975.00-1008.00)
[Thu Oct 27 00:37:16 2011] Size of ../../acisf01954/products/events/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 17 counts
[Thu Oct 27 00:37:16 2011] ../../acisf01954/products/images/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_src.img and ../../acisf01954/products/images/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu Oct 27 00:37:16 2011] Not generating rmf since there are only 17 counts
[Thu Oct 27 00:37:16 2011] arf not found, will run specextract
[Thu Oct 27 00:37:18 2011] ../../acisf01954/products/spectra/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_bkg.pi not found
[Thu Oct 27 00:37:18 2011] ../../acisf01954/products/spectra/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5.warf not found
[Thu Oct 27 00:37:18 2011] ../../acisf01954/products/spectra/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5.wrmf not found
[Thu Oct 27 00:37:18 2011] Removal of ../../acisf01954/products/spectra/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5.soff failed
[Thu Oct 27 00:37:18 2011] Failed to rename ../../acisf01954/products/spectra/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_grp.pi to ../../acisf01954/products/spectra/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_src.pi
[Thu Oct 27 00:37:23 2011] ../../acisf01954/products/lightcurves/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_src.lc and ../../acisf01954/products/lightcurves/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu Oct 27 00:38:26 2011] No arf file found
[Thu Oct 27 00:41:17 2011] Updating aperture counts using extracted products
[Thu Oct 27 00:41:17 2011] Error reading totcts from fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_src.pi
[Thu Oct 27 00:41:17 2011] No arf file for this source, not re-computing flux
[Thu Oct 27 00:41:19 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 00:41:20 2011] acisf01954/analysis//spectral/fullrun_ccd0_acisf01954_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete