[Wed Sep 28 13:24:15 2011] Detection parameters:
  Position = (660.5, 413.0) = 6 36 0.14 -62 34 22.1
  Extent = 0.9" x 0.6", rotation angle = 71 degrees
  Source counts = 19.9 +/- 4.7
  Background counts = 2.1
  Rate = 0.0008 +/- 0.0002

[Wed Sep 28 13:24:16 2011] Off-axis axis estimate = 4.31'
[Wed Sep 28 13:25:16 2011] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 13:25:16 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Wed Sep 28 13:25:16 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.878
[Wed Sep 28 13:25:16 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.93"
[Wed Sep 28 13:25:17 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src37.ximg exists
[Wed Sep 28 13:25:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src37.csv
[Wed Sep 28 13:25:17 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src37_1.ximg exists
[Wed Sep 28 13:25:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src37.csv
[Wed Sep 28 13:25:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:25:19 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Wed Sep 28 13:25:19 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Wed Sep 28 13:25:19 2011] Fit fullrun_ccd6_acisf01902_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Wed Sep 28 13:25:37 2011] Source 36 is offset by -6.997415 and 6.588235 pixels which is larger than
2 X fitted extent = 0.942854 x 0.942854, not incorporating fit results
[Wed Sep 28 13:25:37 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:25:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:25:37 2011] Assessing source extent using major
[Wed Sep 28 13:25:37 2011] Source does appear to be extended
[Wed Sep 28 13:25:37 2011] Computing asymmetry using major and minor axis, asym = 1.49
[Wed Sep 28 13:26:05 2011] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 13:26:05 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Wed Sep 28 13:26:05 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.878
[Wed Sep 28 13:26:05 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 0.93"
[Wed Sep 28 13:26:06 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src37.ximg exists
[Wed Sep 28 13:26:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src37.csv
[Wed Sep 28 13:26:06 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src37_1.ximg exists
[Wed Sep 28 13:26:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src37.csv
[Wed Sep 28 13:26:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:26:08 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Wed Sep 28 13:26:08 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Wed Sep 28 13:26:08 2011] Fit fullrun_ccd6_acisf01902_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Wed Sep 28 13:26:25 2011] Spatial fit model total counts = 43.727000, observed total counts = 44.000000
[Wed Sep 28 13:26:25 2011] Offset between fit and detection position for source 36 = 3.117177 pixels
[Wed Sep 28 13:26:25 2011] 40.042760 total counts/ 3.259360 bgd. counts: snr = 20.374441
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 3.117177 pixels
  Position = (662.4, 415.5) = 6 36 0.04 -62 34 21.1
  Extent = 1.9 (1.8-3.7)", rotation angle = 0
  Source counts = 36.8 +/- 6.3
  Background counts = 3.3
  Rate = 0.001 +/- 0.0003
[Wed Sep 28 13:26:25 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:26:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:26:25 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 13:26:25 2011] Source does appear to be extended
[Wed Sep 28 13:26:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 13:29:17 2011] Not overwriting source region fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_src.reg
[Wed Sep 28 13:29:17 2011] Extracting stamp from image fullrun_ccd6_acisf01902_pi14-548_cl_sm2.00.img.gz, (578, 331) - (747, 500)
[Wed Sep 28 13:29:17 2011] Writing fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36.gif
[Wed Sep 28 13:30:50 2011] ../../acisf01902/products/events/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_src.evt and ../../acisf01902/products/events/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Wed Sep 28 13:30:50 2011] Size of ../../acisf01902/products/events/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_src.evt.gz[events] = 90 counts
[Wed Sep 28 13:30:50 2011] Mean chipx,y = (747.80, 561.71)
[Wed Sep 28 13:30:50 2011] Mean tdetx,y = (3622.80, 2263.71)
[Wed Sep 28 13:30:50 2011] chipx,y range = (742.00-756.00, 550.00-573.00)
[Wed Sep 28 13:30:50 2011] Size of ../../acisf01902/products/events/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 88 counts
[Wed Sep 28 13:30:50 2011] ../../acisf01902/products/images/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_src.img and ../../acisf01902/products/images/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Wed Sep 28 13:30:50 2011] ../../acisf01902/products/spectra/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_src.pi and ../../acisf01902/products/spectra/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Wed Sep 28 13:30:50 2011] Not generating rmf since there are only 36 counts
[Wed Sep 28 13:30:53 2011] ../../acisf01902/products/lightcurves/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_src.lc and ../../acisf01902/products/lightcurves/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Wed Sep 28 13:31:09 2011] 206.64
[Wed Sep 28 13:32:03 2011] Updating aperture counts using extracted products
[Wed Sep 28 13:32:03 2011] Error reading totcts from fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36_src.pi.gz
[Wed Sep 28 13:32:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 13:32:04 2011] Using photon index=1.80, rate=0.0015, arf fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src36.arf
[Wed Sep 28 13:32:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 13:32:04 2011] Updating source flux to 1.5e-14
[Wed Sep 28 13:33:55 2011] Flag b found in src. 36 procflags, skipping spectral fitting
[Wed Sep 28 13:33:55 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting