[Wed Sep 28 13:24:14 2011] Detection parameters:
  Position = (929.1, 360.3) = 6 35 41.02 -62 34 48.1
  Extent = 0.8" x 0.5", rotation angle = 153 degrees
  Source counts = 28.4 +/- 5.7
  Background counts = 4.6
  Rate = 0.001 +/- 0.0002

[Wed Sep 28 13:24:16 2011] Off-axis axis estimate = 3.15'
[Wed Sep 28 13:25:16 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 13:25:16 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Wed Sep 28 13:25:16 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.989
[Wed Sep 28 13:25:16 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.61"
[Wed Sep 28 13:25:17 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src28.ximg exists
[Wed Sep 28 13:25:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src28.csv
[Wed Sep 28 13:25:17 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src28_1.ximg exists
[Wed Sep 28 13:25:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src28.csv
[Wed Sep 28 13:25:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01902_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:25:18 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Wed Sep 28 13:25:18 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Sep 28 13:25:18 2011] Fit fullrun_ccd6_acisf01902_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Wed Sep 28 13:25:37 2011] Spatial fit model total counts = 52.999800, observed total counts = 53.000000
[Wed Sep 28 13:25:37 2011] Offset between fit and detection position for source 21 = 0.573276 pixels
[Wed Sep 28 13:25:37 2011] 54.188500 total counts/ 33.241700 bgd. counts: snr = 3.633089
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.573276 pixels
  Position = (929.7, 360.4) = 6 35 41.01 -62 34 48.3
  Extent = 1.0 (0.6-1.5)", rotation angle = 0
  Source counts = 20.9 +/- 7.4
  Background counts = 33.2
  Rate = 0.0009 +/- 0.0003
[Wed Sep 28 13:25:37 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:25:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:25:37 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 13:25:37 2011] Source does appear to be extended
[Wed Sep 28 13:25:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 13:26:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 13:26:05 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Wed Sep 28 13:26:05 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.978
[Wed Sep 28 13:26:05 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 1.00"
[Wed Sep 28 13:26:06 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src28.ximg exists
[Wed Sep 28 13:26:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src28.csv
[Wed Sep 28 13:26:06 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src28_1.ximg exists
[Wed Sep 28 13:26:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src28.csv
[Wed Sep 28 13:26:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01902_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 13:26:08 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Wed Sep 28 13:26:08 2011] fullrun_ccd6_acisf01902_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Sep 28 13:26:08 2011] Fit fullrun_ccd6_acisf01902_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Sep 28 13:26:25 2011] Spatial fit model total counts = 52.999800, observed total counts = 53.000000
[Wed Sep 28 13:26:25 2011] Offset between fit and detection position for source 21 = 0.001000 pixels
[Wed Sep 28 13:26:25 2011] 54.186800 total counts/ 33.205500 bgd. counts: snr = 3.641056
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.001000 pixels
  Position = (929.6, 360.4) = 6 35 41.01 -62 34 48.3
  Extent = 1.0 (0.6-2.0)", rotation angle = 0
  Source counts = 21.0 +/- 7.4
  Background counts = 33.2
  Rate = 0.0009 +/- 0.0003
[Wed Sep 28 13:26:25 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 13:26:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 13:26:25 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 13:26:25 2011] Source does appear to be extended
[Wed Sep 28 13:26:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 13:29:17 2011] Not overwriting source region fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_src.reg
[Wed Sep 28 13:29:17 2011] Extracting stamp from image fullrun_ccd6_acisf01902_pi14-548_cl_sm2.00.img.gz, (884, 315) - (975, 406)
[Wed Sep 28 13:29:17 2011] Writing fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21.gif
[Wed Sep 28 13:30:24 2011] ../../acisf01902/products/events/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_src.evt and ../../acisf01902/products/events/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Wed Sep 28 13:30:24 2011] Size of ../../acisf01902/products/events/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_src.evt.gz[events] = 55 counts
[Wed Sep 28 13:30:24 2011] Mean chipx,y = (913.78, 353.16)
[Wed Sep 28 13:30:24 2011] Mean tdetx,y = (3788.78, 2055.16)
[Wed Sep 28 13:30:24 2011] chipx,y range = (900.00-928.00, 333.00-374.00)
[Wed Sep 28 13:30:24 2011] Size of ../../acisf01902/products/events/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 179 counts
[Wed Sep 28 13:30:24 2011] ../../acisf01902/products/images/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_src.img and ../../acisf01902/products/images/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Wed Sep 28 13:30:24 2011] ../../acisf01902/products/spectra/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_src.pi and ../../acisf01902/products/spectra/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Wed Sep 28 13:30:24 2011] Not generating rmf since there are only 20 counts
[Wed Sep 28 13:30:27 2011] ../../acisf01902/products/lightcurves/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_src.lc and ../../acisf01902/products/lightcurves/fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Wed Sep 28 13:31:09 2011] 212.051
[Wed Sep 28 13:32:03 2011] Updating aperture counts using extracted products
[Wed Sep 28 13:32:03 2011] Error reading totcts from fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21_src.pi.gz
[Wed Sep 28 13:32:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 13:32:04 2011] Using photon index=1.80, rate=0.000854, arf fullrun_ccd6_acisf01902_pi14-548_pass1_cl_src21.arf
[Wed Sep 28 13:32:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 13:32:04 2011] Updating source flux to 8.2e-15
[Wed Sep 28 13:33:55 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting