[Mon Oct 10 06:25:05 2011] Detection parameters:
  Position = (963.7, 156.5) = 20 27 24.67 37 23 25.7
  Extent = 0.5" x 0.5", rotation angle = 18 degrees
  Source counts = 26.0 +/- 5.4
  Background counts = 3.0
  Rate = 0.0006 +/- 0.0001

[Mon Oct 10 06:25:09 2011] Off-axis axis estimate = 0.90'
[Mon Oct 10 06:26:00 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 06:26:00 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 10 06:26:00 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.387
[Mon Oct 10 06:26:00 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.38"
[Mon Oct 10 06:26:01 2011] fullrun_ccd3_acisf01893_pi14-548_cl_pass0_src21.ximg exists
[Mon Oct 10 06:26:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01893_pi14-548_cl_pass0_src21.csv
[Mon Oct 10 06:26:01 2011] fullrun_ccd3_acisf01893_pi14-548_cl_pass0_src21_1.ximg exists
[Mon Oct 10 06:26:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01893_pi14-548_cl_pass0_src21.csv
[Mon Oct 10 06:26:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01893_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01893_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 06:26:05 2011] fullrun_ccd3_acisf01893_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Mon Oct 10 06:26:05 2011] fullrun_ccd3_acisf01893_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Oct 10 06:26:05 2011] Fit fullrun_ccd3_acisf01893_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Oct 10 06:26:24 2011] Spatial fit model total counts = 30.953100, observed total counts = 31.000000
[Mon Oct 10 06:26:24 2011] Offset between fit and detection position for source 21 = 0.569251 pixels
[Mon Oct 10 06:26:24 2011] 30.053110 total counts/ 5.995810 bgd. counts: snr = 9.824783
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.569251 pixels
  Position = (964.1, 156.9) = 20 27 24.67 37 23 25.6
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 24.1 +/- 5.5
  Background counts = 6.0
  Rate = 0.0005 +/- 0.0001
[Mon Oct 10 06:26:24 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 06:26:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 06:26:24 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 06:26:24 2011] Source does appear to be extended
[Mon Oct 10 06:26:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 06:26:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 06:26:49 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Mon Oct 10 06:26:49 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.185
[Mon Oct 10 06:26:49 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.66"
[Mon Oct 10 06:26:51 2011] fullrun_ccd3_acisf01893_pi14-548_cl_pass1_src20.ximg exists
[Mon Oct 10 06:26:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01893_pi14-548_cl_pass1_src20.csv
[Mon Oct 10 06:26:51 2011] fullrun_ccd3_acisf01893_pi14-548_cl_pass1_src20_1.ximg exists
[Mon Oct 10 06:26:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01893_pi14-548_cl_pass1_src20.csv
[Mon Oct 10 06:26:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01893_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01893_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 06:26:52 2011] fullrun_ccd3_acisf01893_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Mon Oct 10 06:26:52 2011] fullrun_ccd3_acisf01893_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Oct 10 06:26:52 2011] Fit fullrun_ccd3_acisf01893_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Oct 10 06:27:11 2011] Spatial fit model total counts = 31.159300, observed total counts = 31.000000
[Mon Oct 10 06:27:11 2011] Offset between fit and detection position for source 21 = 0.020691 pixels
[Mon Oct 10 06:27:11 2011] 30.312080 total counts/ 5.833580 bgd. counts: snr = 10.134848
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.020691 pixels
  Position = (964.1, 156.9) = 20 27 24.67 37 23 25.6
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 24.5 +/- 5.5
  Background counts = 5.8
  Rate = 0.0006 +/- 0.0001
[Mon Oct 10 06:27:11 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 06:27:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 06:27:11 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 06:27:11 2011] Source does appear to be extended
[Mon Oct 10 06:27:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 06:30:59 2011] Not overwriting source region fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_src.reg
[Mon Oct 10 06:30:59 2011] Extracting stamp from image fullrun_ccd3_acisf01893_pi14-548_cl_sm2.00.img.gz, (934, 127) - (994, 187)
[Mon Oct 10 06:30:59 2011] Writing fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21.gif
[Mon Oct 10 06:32:06 2011] ../../acisf01893/products/events/fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_src.evt and ../../acisf01893/products/events/fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Mon Oct 10 06:32:06 2011] Size of ../../acisf01893/products/events/fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_src.evt.gz[events] = 26 counts
[Mon Oct 10 06:32:06 2011] Mean chipx,y = (957.92, 894.88)
[Mon Oct 10 06:32:06 2011] Mean tdetx,y = (4237.12, 4018.92)
[Mon Oct 10 06:32:06 2011] chipx,y range = (943.00-977.00, 873.00-911.00)
[Mon Oct 10 06:32:06 2011] Size of ../../acisf01893/products/events/fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 17 counts
[Mon Oct 10 06:32:06 2011] ../../acisf01893/products/images/fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_src.img and ../../acisf01893/products/images/fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Mon Oct 10 06:32:06 2011] ../../acisf01893/products/spectra/fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_src.pi and ../../acisf01893/products/spectra/fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Mon Oct 10 06:32:06 2011] Not generating rmf since there are only 24 counts
[Mon Oct 10 06:32:09 2011] ../../acisf01893/products/lightcurves/fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_src.lc and ../../acisf01893/products/lightcurves/fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Mon Oct 10 06:35:12 2011] 204.459
[Mon Oct 10 06:35:25 2011] Updating aperture counts using extracted products
[Mon Oct 10 06:35:25 2011] Error reading totcts from fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21_src.pi.gz
[Mon Oct 10 06:35:26 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 06:35:26 2011] Using photon index=1.80, rate=0.000552, arf fullrun_ccd3_acisf01893_pi14-548_pass1_cl_src21.arf
[Mon Oct 10 06:35:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 06:35:26 2011] Updating source flux to 7.7e-15
[Mon Oct 10 06:35:42 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting