[Wed Oct 19 04:36:38 2011] Detection parameters:
  Position = (635.7, 344.8) = 18 27 50.56 -3 51 59.7
  Extent = 0.7" x 0.6", rotation angle = 82 degrees
  Source counts = 33.7 +/- 5.9
  Background counts = 1.3
  Rate = 0.0009 +/- 0.0002

[Wed Oct 19 04:36:39 2011] Off-axis axis estimate = 3.41'
[Wed Oct 19 04:37:12 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 04:37:12 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Wed Oct 19 04:37:12 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.154
[Wed Oct 19 04:37:12 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.67"
[Wed Oct 19 04:37:12 2011] fullrun_ccd2_acisf01883_pi14-548_cl_pass0_src4.ximg exists
[Wed Oct 19 04:37:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01883_pi14-548_cl_pass0_src4.csv
[Wed Oct 19 04:37:12 2011] fullrun_ccd2_acisf01883_pi14-548_cl_pass0_src4_1.ximg exists
[Wed Oct 19 04:37:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01883_pi14-548_cl_pass0_src4.csv
[Wed Oct 19 04:37:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01883_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01883_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:37:12 2011] fullrun_ccd2_acisf01883_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed Oct 19 04:37:12 2011] fullrun_ccd2_acisf01883_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Oct 19 04:37:12 2011] Fit fullrun_ccd2_acisf01883_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Oct 19 04:37:18 2011] Spatial fit model total counts = 32.750100, observed total counts = 35.000000
[Wed Oct 19 04:37:18 2011] Offset between fit and detection position for source 5 = 0.662259 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.662259 pixels
  Position = (636.0, 345.4) = 18 27 50.57 -3 51 59.7
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 33.1 +/- 5.8
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Wed Oct 19 04:37:18 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 04:37:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 04:37:18 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 04:37:18 2011] Source does appear to be extended
[Wed Oct 19 04:37:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 04:37:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 04:37:31 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Wed Oct 19 04:37:31 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Wed Oct 19 04:37:31 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.85"
[Wed Oct 19 04:37:33 2011] fullrun_ccd2_acisf01883_pi14-548_cl_pass1_src4.ximg exists
[Wed Oct 19 04:37:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01883_pi14-548_cl_pass1_src4.csv
[Wed Oct 19 04:37:33 2011] fullrun_ccd2_acisf01883_pi14-548_cl_pass1_src4_1.ximg exists
[Wed Oct 19 04:37:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01883_pi14-548_cl_pass1_src4.csv
[Wed Oct 19 04:37:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01883_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01883_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:37:33 2011] fullrun_ccd2_acisf01883_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Wed Oct 19 04:37:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01883_pi14-548_cl_pass1_tfrozen_src4.csv
[Wed Oct 19 04:37:33 2011] fullrun_ccd2_acisf01883_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Oct 19 04:37:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01883_pi14-548_cl_pass1_tfrozen_src4.csv
[Wed Oct 19 04:37:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01883_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01883_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:37:38 2011] Spatial fit model total counts = 32.210200, observed total counts = 36.000000
[Wed Oct 19 04:37:38 2011] Offset between fit and detection position for source 5 = 0.089799 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.089799 pixels
  Position = (635.9, 345.3) = 18 27 50.57 -3 51 59.7
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 33.1 +/- 5.8
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Wed Oct 19 04:37:38 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 04:37:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 04:37:38 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 04:37:38 2011] Source does appear to be extended
[Wed Oct 19 04:37:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 04:38:39 2011] Not overwriting source region fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_src.reg
[Wed Oct 19 04:38:39 2011] Extracting stamp from image fullrun_ccd2_acisf01883_pi14-548_cl_sm2.00.img.gz, (596, 306) - (675, 385)
[Wed Oct 19 04:38:39 2011] Writing fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5.gif
[Wed Oct 19 04:39:00 2011] ../../acisf01883/products/events/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_src.evt and ../../acisf01883/products/events/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Wed Oct 19 04:39:00 2011] Size of ../../acisf01883/products/events/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_src.evt.gz[events] = 35 counts
[Wed Oct 19 04:39:00 2011] Mean chipx,y = (402.06, 842.54)
[Wed Oct 19 04:39:00 2011] Mean tdetx,y = (3903.54, 3683.94)
[Wed Oct 19 04:39:00 2011] chipx,y range = (387.00-419.00, 826.00-860.00)
[Wed Oct 19 04:39:00 2011] Size of ../../acisf01883/products/events/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 15 counts
[Wed Oct 19 04:39:00 2011] ../../acisf01883/products/images/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_src.img and ../../acisf01883/products/images/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Wed Oct 19 04:39:00 2011] Not generating rmf since there are only 33 counts
[Wed Oct 19 04:39:00 2011] arf not found, will run specextract
[Wed Oct 19 04:39:02 2011] ../../acisf01883/products/spectra/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_bkg.pi not found
[Wed Oct 19 04:39:02 2011] ../../acisf01883/products/spectra/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5.warf not found
[Wed Oct 19 04:39:02 2011] ../../acisf01883/products/spectra/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5.wrmf not found
[Wed Oct 19 04:39:02 2011] Removal of ../../acisf01883/products/spectra/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5.soff failed
[Wed Oct 19 04:39:02 2011] Failed to rename ../../acisf01883/products/spectra/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_grp.pi to ../../acisf01883/products/spectra/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_src.pi
[Wed Oct 19 04:39:08 2011] ../../acisf01883/products/lightcurves/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_src.lc and ../../acisf01883/products/lightcurves/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Wed Oct 19 04:40:23 2011] No arf file found
[Wed Oct 19 04:42:05 2011] Updating aperture counts using extracted products
[Wed Oct 19 04:42:05 2011] Error reading totcts from fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_src.pi
[Wed Oct 19 04:42:05 2011] No arf file for this source, not re-computing flux
[Wed Oct 19 04:42:09 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 04:42:10 2011] acisf01883/analysis//spectral/fullrun_ccd2_acisf01883_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete