[Wed Oct 26 21:32:03 2011] Detection parameters:
  Position = (190.6, 775.5) = 6 7 24.20 -6 11 57.5
  Extent = 3.8" x 3.0", rotation angle = 125 degrees
  Source counts = 212.7 +/- 23.6
  Background counts = 346.3
  Rate = 0.002 +/- 0.0002

[Wed Oct 26 21:32:03 2011] Off-axis axis estimate = 12.71'
[Wed Oct 26 21:34:02 2011] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:34:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 21:34:02 2011] Initial guess for spatial extent in simple fitting = 7.23"
[Wed Oct 26 21:34:02 2011] source mask rpix=14.7, npix_max = 923, mask sum = 961, frac = 1.040
[Wed Oct 26 21:34:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Wed Oct 26 21:34:02 2011] fullrun_ccd7_acisf01882_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 21:34:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01882_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 21:34:02 2011] fullrun_ccd7_acisf01882_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 21:34:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01882_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 21:34:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01882_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01882_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:34:04 2011] fullrun_ccd7_acisf01882_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 21:34:04 2011] fullrun_ccd7_acisf01882_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 21:34:04 2011] Fit fullrun_ccd7_acisf01882_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 21:34:54 2011] Spatial fit model total counts = 817.292000, observed total counts = 796.000000
[Wed Oct 26 21:34:54 2011] Offset between fit and detection position for source 1 = 3.334600 pixels
[Wed Oct 26 21:34:54 2011] 817.125000 total counts/ 514.484000 bgd. counts: snr = 13.342642
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.334600 pixels
  Position = (191.0, 778.9) = 6 7 24.20 -6 11 56.1
  Extent = 9.1 (7.7-11.3)", rotation angle = 0
  Source counts = 302.6 +/- 28.6
  Background counts = 514.5
  Rate = 0.003 +/- 0.0003
[Wed Oct 26 21:34:54 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:54 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:54 2011] Source does appear to be extended
[Wed Oct 26 21:34:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:36:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:36:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 21:36:01 2011] Initial guess for spatial extent in simple fitting = 9.15"
[Wed Oct 26 21:36:01 2011] source mask rpix=18.6, npix_max = 1458, mask sum = 1444, frac = 0.990
[Wed Oct 26 21:36:01 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.15"
[Wed Oct 26 21:36:01 2011] fullrun_ccd7_acisf01882_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 21:36:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01882_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 21:36:01 2011] fullrun_ccd7_acisf01882_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 21:36:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01882_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 21:36:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01882_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01882_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:36:01 2011] fullrun_ccd7_acisf01882_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 21:36:01 2011] fullrun_ccd7_acisf01882_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 21:36:01 2011] Fit fullrun_ccd7_acisf01882_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 21:36:51 2011] Spatial fit model total counts = 1188.480000, observed total counts = 1082.000000
[Wed Oct 26 21:36:51 2011] Offset between fit and detection position for source 1 = 1.806023 pixels
[Wed Oct 26 21:36:51 2011] 1188.760000 total counts/ 928.484000 bgd. counts: snr = 8.541751
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.806023 pixels
  Position = (191.3, 777.1) = 6 7 24.19 -6 11 57.0
  Extent = 8.4 (7.2-9.9)", rotation angle = 0
  Source counts = 260.3 +/- 34.5
  Background counts = 928.5
  Rate = 0.003 +/- 0.0004
[Wed Oct 26 21:36:51 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:51 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:51 2011] Source does appear to be extended
[Wed Oct 26 21:36:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:55:27 2011] Not overwriting source region fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 21:55:27 2011] Extracting stamp from image fullrun_ccd7_acisf01882_pi14-548_cl_sm2.00.img.gz, (0, 393) - (575, 1161)
[Wed Oct 26 21:55:27 2011] Writing fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 21:55:28 2011] ../../acisf01882/products/events/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_src.evt and ../../acisf01882/products/events/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 26 21:55:28 2011] Size of ../../acisf01882/products/events/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_src.evt.gz[events] = 817 counts
[Wed Oct 26 21:55:28 2011] Mean chipx,y = (55.76, 788.89)
[Wed Oct 26 21:55:28 2011] Mean tdetx,y = (3972.76, 2490.89)
[Wed Oct 26 21:55:28 2011] chipx,y range = (2.00-134.00, 708.00-863.00)
[Wed Oct 26 21:55:28 2011] Size of ../../acisf01882/products/events/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 4551 counts
[Wed Oct 26 21:55:28 2011] ../../acisf01882/products/images/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_src.img and ../../acisf01882/products/images/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 26 21:55:28 2011] ../../acisf01882/products/spectra/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_src.pi and ../../acisf01882/products/spectra/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 26 21:55:30 2011] ../../acisf01882/products/lightcurves/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 26 21:55:36 2011] Keeping rmf generated by specextract
[Wed Oct 26 21:55:36 2011] 172.719
[Wed Oct 26 21:55:54 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:54 2011] Error reading totcts from fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 21:55:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:54 2011] Using photon index=1.80, rate=0.0027, arf fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 21:55:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:54 2011] Updating source flux to 2.6e-14
[Wed Oct 26 21:58:52 2011] Reading fit data from acisf01882/analysis//spectral/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 26 21:58:52 2011] Spectral fit parameter nH value = 4.64009e+20
[Wed Oct 26 21:58:52 2011] Spectral fit parameter PhoIndex value = 2.25371
[Wed Oct 26 21:58:52 2011] Failed to get F(0.3-8.0) from acisf01882/analysis//spectral/fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 21:58:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:58:52 2011] Using Nh = 4.6e+20, photon index=2.25, rate=0.0027, arf fullrun_ccd7_acisf01882_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 21:58:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:58:52 2011] Updating source flux to 1.7e-14