[Wed Oct 26 21:31:55 2011] Detection parameters:
  Position = (178.3, 638.9) = 6 7 46.58 -6 22 52.7
  Extent = 0.5" x 0.5", rotation angle = 13 degrees
  Source counts = 38.1 +/- 6.6
  Background counts = 5.9
  Rate = 0.0004 +/- 7e-05

[Wed Oct 26 21:32:02 2011] Off-axis axis estimate = 1.00'
[Wed Oct 26 21:33:53 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:53 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct 26 21:33:53 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.927
[Wed Oct 26 21:33:53 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 0.38"
[Wed Oct 26 21:33:57 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src55.ximg exists
[Wed Oct 26 21:33:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src55.csv
[Wed Oct 26 21:33:57 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src55_1.ximg exists
[Wed Oct 26 21:33:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src55.csv
[Wed Oct 26 21:33:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:34:01 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Wed Oct 26 21:34:01 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Wed Oct 26 21:34:01 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Wed Oct 26 21:34:53 2011] Spatial fit model total counts = 45.827400, observed total counts = 50.000000
[Wed Oct 26 21:34:53 2011] Offset between fit and detection position for source 81 = 0.669132 pixels
[Wed Oct 26 21:34:53 2011] 44.572260 total counts/ 1.338860 bgd. counts: snr = 37.363866
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 0.669132 pixels
  Position = (178.8, 639.4) = 6 7 46.58 -6 22 52.7
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 43.2 +/- 6.7
  Background counts = 1.3
  Rate = 0.0004 +/- 7e-05
[Wed Oct 26 21:34:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:53 2011] Source does appear to be extended
[Wed Oct 26 21:34:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:51 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Wed Oct 26 21:35:51 2011] source mask rpix=1.2, npix_max = 10, mask sum = 9, frac = 0.823
[Wed Oct 26 21:35:51 2011] Giving source the simple spatial ID 55 for pass 1, mean size = 0.57"
[Wed Oct 26 21:35:56 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src55.ximg exists
[Wed Oct 26 21:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src55.csv
[Wed Oct 26 21:35:56 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src55_1.ximg exists
[Wed Oct 26 21:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src55.csv
[Wed Oct 26 21:35:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Wed Oct 26 21:35:59 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Wed Oct 26 21:36:49 2011] Spatial fit model total counts = 47.653900, observed total counts = 48.000000
[Wed Oct 26 21:36:49 2011] Offset between fit and detection position for source 81 = 0.036961 pixels
[Wed Oct 26 21:36:49 2011] 46.883850 total counts/ 3.865850 bgd. counts: snr = 21.879012
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 0.036961 pixels
  Position = (178.7, 639.4) = 6 7 46.58 -6 22 52.7
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 43.0 +/- 6.8
  Background counts = 3.9
  Rate = 0.0004 +/- 7e-05
[Wed Oct 26 21:36:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:49 2011] Source does appear to be extended
[Wed Oct 26 21:36:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:47:04 2011] Not overwriting source region fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_src.reg
[Wed Oct 26 21:47:04 2011] Extracting stamp from image fullrun_ccd3_acisf01882_pi14-548_cl_sm2.00.img.gz, (154, 615) - (203, 664)
[Wed Oct 26 21:47:04 2011] Writing fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81.gif
[Wed Oct 26 21:49:52 2011] ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_src.evt and ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_bgd.evt exist, delete to re-create
[Wed Oct 26 21:49:52 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_src.evt.gz[events] = 43 counts
[Wed Oct 26 21:49:52 2011] Mean chipx,y = (904.65, 897.23)
[Wed Oct 26 21:49:52 2011] Mean tdetx,y = (4234.77, 3965.65)
[Wed Oct 26 21:49:52 2011] chipx,y range = (885.00-921.00, 882.00-915.00)
[Wed Oct 26 21:49:52 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_bgd.evt.gz[events] = 29 counts
[Wed Oct 26 21:49:52 2011] ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_src.img and ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_bgd.img exist, delete to re-create
[Wed Oct 26 21:49:52 2011] ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_src.pi and ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_bgd.pi exist, delete to re-create
[Wed Oct 26 21:49:52 2011] Not generating rmf since there are only 43 counts
[Wed Oct 26 21:49:55 2011] ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_bgd.lc exist, delete to re-create
[Wed Oct 26 21:55:14 2011] 204.787
[Wed Oct 26 21:55:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:51 2011] Error reading totcts from fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81_src.pi.gz
[Wed Oct 26 21:55:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:53 2011] Using photon index=1.80, rate=0.000444, arf fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src81.arf
[Wed Oct 26 21:55:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:53 2011] Updating source flux to 4.8e-15
[Wed Oct 26 21:57:51 2011] Source 81 has fewer than 100.000000 counts, skipping spectral fitting