[Wed Oct 26 21:31:52 2011] Detection parameters:
  Position = (213.7, 606.3) = 6 7 45.41 -6 23 8.8
  Extent = 0.6" x 0.5", rotation angle = 17 degrees
  Source counts = 35.9 +/- 6.5
  Background counts = 6.1
  Rate = 0.0004 +/- 7e-05

[Wed Oct 26 21:32:02 2011] Off-axis axis estimate = 1.33'
[Wed Oct 26 21:33:53 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:53 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Oct 26 21:33:53 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.366
[Wed Oct 26 21:33:53 2011] Giving source the simple spatial ID 57 for pass 0, mean size = 0.39"
[Wed Oct 26 21:33:57 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src57.ximg exists
[Wed Oct 26 21:33:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src57.csv
[Wed Oct 26 21:33:57 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src57_1.ximg exists
[Wed Oct 26 21:33:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src57.csv
[Wed Oct 26 21:33:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:34:01 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src57.ximg exists
[Wed Oct 26 21:34:01 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src57_1.ximg exists
[Wed Oct 26 21:34:01 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src57 appears to have run properly
[Wed Oct 26 21:34:53 2011] Spatial fit model total counts = 47.947300, observed total counts = 48.000000
[Wed Oct 26 21:34:53 2011] Offset between fit and detection position for source 63 = 0.991988 pixels
[Wed Oct 26 21:34:53 2011] 48.445700 total counts/ 12.845900 bgd. counts: snr = 9.932654
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.991988 pixels
  Position = (214.3, 607.0) = 6 7 45.40 -6 23 8.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 35.6 +/- 7.0
  Background counts = 12.8
  Rate = 0.0004 +/- 7e-05
[Wed Oct 26 21:34:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:53 2011] Source does appear to be extended
[Wed Oct 26 21:34:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:51 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Oct 26 21:35:51 2011] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.710
[Wed Oct 26 21:35:51 2011] Giving source the simple spatial ID 57 for pass 1, mean size = 0.47"
[Wed Oct 26 21:35:56 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src57.ximg exists
[Wed Oct 26 21:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src57.csv
[Wed Oct 26 21:35:56 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src57_1.ximg exists
[Wed Oct 26 21:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src57.csv
[Wed Oct 26 21:35:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src57.ximg exists
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src57_1.ximg exists
[Wed Oct 26 21:35:59 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src57 appears to have run properly
[Wed Oct 26 21:36:49 2011] Spatial fit model total counts = 48.999700, observed total counts = 49.000000
[Wed Oct 26 21:36:49 2011] Offset between fit and detection position for source 63 = 0.003883 pixels
[Wed Oct 26 21:36:49 2011] 49.238500 total counts/ 13.605500 bgd. counts: snr = 9.660401
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.003883 pixels
  Position = (214.3, 607.0) = 6 7 45.40 -6 23 8.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 35.6 +/- 7.0
  Background counts = 13.6
  Rate = 0.0004 +/- 7e-05
[Wed Oct 26 21:36:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:49 2011] Source does appear to be extended
[Wed Oct 26 21:36:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:47:04 2011] Not overwriting source region fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_src.reg
[Wed Oct 26 21:47:04 2011] Extracting stamp from image fullrun_ccd3_acisf01882_pi14-548_cl_sm2.00.img.gz, (193, 585) - (236, 629)
[Wed Oct 26 21:47:04 2011] Writing fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63.gif
[Wed Oct 26 21:49:57 2011] ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_src.evt and ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_bgd.evt exist, delete to re-create
[Wed Oct 26 21:49:58 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_src.evt.gz[events] = 38 counts
[Wed Oct 26 21:49:58 2011] Mean chipx,y = (907.42, 846.58)
[Wed Oct 26 21:49:58 2011] Mean tdetx,y = (4285.42, 3968.42)
[Wed Oct 26 21:49:58 2011] chipx,y range = (890.00-924.00, 833.00-867.00)
[Wed Oct 26 21:49:58 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_bgd.evt.gz[events] = 33 counts
[Wed Oct 26 21:49:58 2011] ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_src.img and ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_bgd.img exist, delete to re-create
[Wed Oct 26 21:49:58 2011] ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_src.pi and ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_bgd.pi exist, delete to re-create
[Wed Oct 26 21:49:58 2011] Not generating rmf since there are only 35 counts
[Wed Oct 26 21:50:01 2011] ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_bgd.lc exist, delete to re-create
[Wed Oct 26 21:55:14 2011] 204.064
[Wed Oct 26 21:55:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:51 2011] Error reading totcts from fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63_src.pi.gz
[Wed Oct 26 21:55:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:53 2011] Using photon index=1.80, rate=0.000368, arf fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src63.arf
[Wed Oct 26 21:55:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:53 2011] Updating source flux to 4e-15
[Wed Oct 26 21:57:51 2011] Source 63 has fewer than 100.000000 counts, skipping spectral fitting