[Wed Oct 26 21:31:51 2011] Detection parameters:
  Position = (163.6, 555.4) = 6 7 47.06 -6 23 33.8
  Extent = 0.5" x 0.5", rotation angle = 65 degrees
  Source counts = 29.2 +/- 5.7
  Background counts = 2.8
  Rate = 0.0003 +/- 6e-05

[Wed Oct 26 21:32:02 2011] Off-axis axis estimate = 1.14'
[Wed Oct 26 21:33:53 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:53 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct 26 21:33:53 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.385
[Wed Oct 26 21:33:53 2011] Giving source the simple spatial ID 69 for pass 0, mean size = 0.38"
[Wed Oct 26 21:33:58 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src69.ximg exists
[Wed Oct 26 21:33:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src69.csv
[Wed Oct 26 21:33:58 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src69_1.ximg exists
[Wed Oct 26 21:33:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src69.csv
[Wed Oct 26 21:33:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:34:01 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src69.ximg exists
[Wed Oct 26 21:34:01 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src69_1.ximg exists
[Wed Oct 26 21:34:01 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src69 appears to have run properly
[Wed Oct 26 21:34:53 2011] Spatial fit model total counts = 39.992500, observed total counts = 40.000000
[Wed Oct 26 21:34:53 2011] Offset between fit and detection position for source 38 = 0.818338 pixels
[Wed Oct 26 21:34:53 2011] 40.363300 total counts/ 10.435300 bgd. counts: snr = 9.264569
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.818338 pixels
  Position = (164.1, 556.0) = 6 7 47.06 -6 23 33.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 29.9 +/- 6.4
  Background counts = 10.4
  Rate = 0.0003 +/- 7e-05
[Wed Oct 26 21:34:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:53 2011] Source does appear to be extended
[Wed Oct 26 21:34:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:51 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct 26 21:35:51 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.623
[Wed Oct 26 21:35:51 2011] Giving source the simple spatial ID 69 for pass 1, mean size = 0.38"
[Wed Oct 26 21:35:57 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src69.ximg exists
[Wed Oct 26 21:35:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src69.csv
[Wed Oct 26 21:35:57 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src69_1.ximg exists
[Wed Oct 26 21:35:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src69.csv
[Wed Oct 26 21:35:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src69.ximg exists
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src69_1.ximg exists
[Wed Oct 26 21:35:59 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src69 appears to have run properly
[Wed Oct 26 21:36:49 2011] Spatial fit model total counts = 38.965600, observed total counts = 39.000000
[Wed Oct 26 21:36:49 2011] Offset between fit and detection position for source 38 = 0.009761 pixels
[Wed Oct 26 21:36:49 2011] 39.114410 total counts/ 8.879610 bgd. counts: snr = 10.146357
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.009761 pixels
  Position = (164.1, 556.0) = 6 7 47.06 -6 23 33.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 30.2 +/- 6.3
  Background counts = 8.9
  Rate = 0.0003 +/- 6e-05
[Wed Oct 26 21:36:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:49 2011] Source does appear to be extended
[Wed Oct 26 21:36:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:47:05 2011] Not overwriting source region fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_src.reg
[Wed Oct 26 21:47:05 2011] Extracting stamp from image fullrun_ccd3_acisf01882_pi14-548_cl_sm2.00.img.gz, (146, 538) - (182, 574)
[Wed Oct 26 21:47:05 2011] Writing fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38.gif
[Wed Oct 26 21:50:35 2011] ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_src.evt and ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_bgd.evt exist, delete to re-create
[Wed Oct 26 21:50:35 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_src.evt.gz[events] = 32 counts
[Wed Oct 26 21:50:35 2011] Mean chipx,y = (980.81, 856.78)
[Wed Oct 26 21:50:35 2011] Mean tdetx,y = (4275.22, 4041.81)
[Wed Oct 26 21:50:35 2011] chipx,y range = (963.00-996.00, 843.00-876.00)
[Wed Oct 26 21:50:35 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 9 counts
[Wed Oct 26 21:50:35 2011] ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_src.img and ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_bgd.img exist, delete to re-create
[Wed Oct 26 21:50:35 2011] ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_src.pi and ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_bgd.pi exist, delete to re-create
[Wed Oct 26 21:50:35 2011] Not generating rmf since there are only 30 counts
[Wed Oct 26 21:50:38 2011] ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_bgd.lc exist, delete to re-create
[Wed Oct 26 21:55:14 2011] 205.048
[Wed Oct 26 21:55:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:51 2011] Error reading totcts from fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38_src.pi.gz
[Wed Oct 26 21:55:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:53 2011] Using photon index=1.80, rate=0.000312, arf fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src38.arf
[Wed Oct 26 21:55:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:53 2011] Updating source flux to 3.4e-15
[Wed Oct 26 21:57:51 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting