[Wed Oct 26 21:31:50 2011] Detection parameters:
  Position = (388.3, 530.2) = 6 7 39.65 -6 23 46.2
  Extent = 0.6" x 0.6", rotation angle = 84 degrees
  Source counts = 64.2 +/- 8.2
  Background counts = 3.8
  Rate = 0.0007 +/- 9e-05

[Wed Oct 26 21:32:02 2011] Off-axis axis estimate = 2.88'
[Wed Oct 26 21:33:53 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:53 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Wed Oct 26 21:33:53 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.845
[Wed Oct 26 21:33:53 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 0.56"
[Wed Oct 26 21:33:55 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src38.ximg exists
[Wed Oct 26 21:33:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src38.csv
[Wed Oct 26 21:33:55 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src38_1.ximg exists
[Wed Oct 26 21:33:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src38.csv
[Wed Oct 26 21:33:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:34:00 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src38.ximg exists
[Wed Oct 26 21:34:00 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Oct 26 21:34:00 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src38 appears to have run properly
[Wed Oct 26 21:34:53 2011] Spatial fit model total counts = 73.949700, observed total counts = 74.000000
[Wed Oct 26 21:34:53 2011] Offset between fit and detection position for source 31 = 0.927450 pixels
[Wed Oct 26 21:34:53 2011] 72.835200 total counts/ 12.445900 bgd. counts: snr = 17.117756
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.927450 pixels
  Position = (389.1, 530.7) = 6 7 39.64 -6 23 46.2
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 60.4 +/- 8.5
  Background counts = 12.4
  Rate = 0.0006 +/- 9e-05
[Wed Oct 26 21:34:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:53 2011] Source does appear to be extended
[Wed Oct 26 21:34:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:51 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Wed Oct 26 21:35:51 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.987
[Wed Oct 26 21:35:51 2011] Giving source the simple spatial ID 38 for pass 1, mean size = 0.61"
[Wed Oct 26 21:35:56 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src38.ximg exists
[Wed Oct 26 21:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src38.csv
[Wed Oct 26 21:35:56 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src38_1.ximg exists
[Wed Oct 26 21:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src38.csv
[Wed Oct 26 21:35:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src38.ximg exists
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src38_1.ximg exists
[Wed Oct 26 21:35:59 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src38 appears to have run properly
[Wed Oct 26 21:36:49 2011] Spatial fit model total counts = 75.901900, observed total counts = 75.000000
[Wed Oct 26 21:36:49 2011] Offset between fit and detection position for source 31 = 0.048449 pixels
[Wed Oct 26 21:36:49 2011] 75.475400 total counts/ 15.268500 bgd. counts: snr = 15.408064
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.048449 pixels
  Position = (389.0, 530.7) = 6 7 39.64 -6 23 46.2
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 60.2 +/- 8.7
  Background counts = 15.3
  Rate = 0.0006 +/- 9e-05
[Wed Oct 26 21:36:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:49 2011] Source does appear to be extended
[Wed Oct 26 21:36:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:47:04 2011] Not overwriting source region fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_src.reg
[Wed Oct 26 21:47:04 2011] Extracting stamp from image fullrun_ccd3_acisf01882_pi14-548_cl_sm2.00.img.gz, (361, 503) - (417, 558)
[Wed Oct 26 21:47:04 2011] Writing fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31.gif
[Wed Oct 26 21:49:01 2011] ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_src.evt and ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Wed Oct 26 21:49:01 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_src.evt.gz[events] = 65 counts
[Wed Oct 26 21:49:01 2011] Mean chipx,y = (862.46, 662.57)
[Wed Oct 26 21:49:01 2011] Mean tdetx,y = (4469.43, 3923.46)
[Wed Oct 26 21:49:01 2011] chipx,y range = (843.00-880.00, 646.00-681.00)
[Wed Oct 26 21:49:01 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 38 counts
[Wed Oct 26 21:49:01 2011] ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_src.img and ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Wed Oct 26 21:49:01 2011] ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_src.pi and ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Wed Oct 26 21:49:01 2011] Not generating rmf since there are only 60 counts
[Wed Oct 26 21:49:04 2011] ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Wed Oct 26 21:55:14 2011] 199.033
[Wed Oct 26 21:55:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:51 2011] Error reading totcts from fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31_src.pi.gz
[Wed Oct 26 21:55:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:53 2011] Using photon index=1.80, rate=0.000622, arf fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src31.arf
[Wed Oct 26 21:55:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:53 2011] Updating source flux to 6.9e-15
[Wed Oct 26 21:57:51 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting