[Wed Oct 26 21:31:49 2011] Detection parameters:
  Position = (277.7, 440.8) = 6 7 43.29 -6 24 30.2
  Extent = 0.8" x 0.5", rotation angle = 66 degrees
  Source counts = 30.6 +/- 5.8
  Background counts = 3.4
  Rate = 0.0003 +/- 6e-05

[Wed Oct 26 21:32:02 2011] Off-axis axis estimate = 2.47'
[Wed Oct 26 21:33:53 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:53 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Wed Oct 26 21:33:53 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.012
[Wed Oct 26 21:33:53 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 0.49"
[Wed Oct 26 21:33:57 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src65.ximg exists
[Wed Oct 26 21:33:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src65.csv
[Wed Oct 26 21:33:58 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src65_1.ximg exists
[Wed Oct 26 21:33:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src65.csv
[Wed Oct 26 21:33:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:34:01 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src65.ximg exists
[Wed Oct 26 21:34:01 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src65_1.ximg exists
[Wed Oct 26 21:34:01 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src65 appears to have run properly
[Wed Oct 26 21:34:53 2011] Spatial fit model total counts = 35.997300, observed total counts = 36.000000
[Wed Oct 26 21:34:53 2011] Offset between fit and detection position for source 17 = 1.052038 pixels
[Wed Oct 26 21:34:53 2011] 35.615080 total counts/ 8.208380 bgd. counts: snr = 9.565948
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.052038 pixels
  Position = (278.3, 441.7) = 6 7 43.29 -6 24 30.0
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 27.4 +/- 6.0
  Background counts = 8.2
  Rate = 0.0003 +/- 6e-05
[Wed Oct 26 21:34:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:53 2011] Source does appear to be extended
[Wed Oct 26 21:34:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:51 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Oct 26 21:35:51 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.069
[Wed Oct 26 21:35:51 2011] Giving source the simple spatial ID 65 for pass 1, mean size = 0.47"
[Wed Oct 26 21:35:57 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src65.ximg exists
[Wed Oct 26 21:35:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src65.csv
[Wed Oct 26 21:35:57 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src65_1.ximg exists
[Wed Oct 26 21:35:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src65.csv
[Wed Oct 26 21:35:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src65.ximg exists
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src65_1.ximg exists
[Wed Oct 26 21:35:59 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src65 appears to have run properly
[Wed Oct 26 21:36:49 2011] Spatial fit model total counts = 39.996200, observed total counts = 40.000000
[Wed Oct 26 21:36:49 2011] Offset between fit and detection position for source 17 = 0.059558 pixels
[Wed Oct 26 21:36:49 2011] 40.456000 total counts/ 14.247100 bgd. counts: snr = 6.943614
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.059558 pixels
  Position = (278.3, 441.7) = 6 7 43.29 -6 24 30.0
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 26.2 +/- 6.4
  Background counts = 14.2
  Rate = 0.0003 +/- 7e-05
[Wed Oct 26 21:36:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:49 2011] Source does appear to be extended
[Wed Oct 26 21:36:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:47:05 2011] Not overwriting source region fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_src.reg
[Wed Oct 26 21:47:05 2011] Extracting stamp from image fullrun_ccd3_acisf01882_pi14-548_cl_sm2.00.img.gz, (258, 421) - (299, 462)
[Wed Oct 26 21:47:05 2011] Writing fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17.gif
[Wed Oct 26 21:50:23 2011] ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_src.evt and ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Wed Oct 26 21:50:23 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_src.evt.gz[events] = 29 counts
[Wed Oct 26 21:50:23 2011] Mean chipx,y = (998.86, 701.55)
[Wed Oct 26 21:50:23 2011] Mean tdetx,y = (4430.45, 4059.86)
[Wed Oct 26 21:50:23 2011] chipx,y range = (984.00-1016.00, 685.00-715.00)
[Wed Oct 26 21:50:23 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 21 counts
[Wed Oct 26 21:50:23 2011] ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_src.img and ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Wed Oct 26 21:50:23 2011] ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_src.pi and ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Wed Oct 26 21:50:23 2011] Not generating rmf since there are only 26 counts
[Wed Oct 26 21:50:26 2011] ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Wed Oct 26 21:55:14 2011] 202.431
[Wed Oct 26 21:55:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:51 2011] Error reading totcts from fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17_src.pi.gz
[Wed Oct 26 21:55:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:53 2011] Using photon index=1.80, rate=0.000271, arf fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src17.arf
[Wed Oct 26 21:55:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:53 2011] Updating source flux to 3e-15
[Wed Oct 26 21:57:51 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting