[Wed Oct 26 21:31:59 2011] Detection parameters:
  Position = (704.1, 231.3) = 6 7 29.22 -6 26 13.2
  Extent = 1.9" x 0.9", rotation angle = 96 degrees
  Source counts = 55.4 +/- 8.0
  Background counts = 8.6
  Rate = 0.0006 +/- 8e-05

[Wed Oct 26 21:32:02 2011] Off-axis axis estimate = 6.30'
[Wed Oct 26 21:33:53 2011] Using EEF radius (= 1.78 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:53 2011] Initial guess for spatial extent in simple fitting = 1.78"
[Wed Oct 26 21:33:53 2011] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.939
[Wed Oct 26 21:33:53 2011] Giving source the simple spatial ID 42 for pass 0, mean size = 1.78"
[Wed Oct 26 21:33:55 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src42.ximg exists
[Wed Oct 26 21:33:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src42.csv
[Wed Oct 26 21:33:55 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src42_1.ximg exists
[Wed Oct 26 21:33:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src42.csv
[Wed Oct 26 21:33:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:34:00 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src42.ximg exists
[Wed Oct 26 21:34:00 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src42_1.ximg exists
[Wed Oct 26 21:34:00 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src42 appears to have run properly
[Wed Oct 26 21:34:53 2011] Spatial fit model total counts = 59.420800, observed total counts = 63.000000
[Wed Oct 26 21:34:53 2011] Offset between fit and detection position for source 144 = 0.912911 pixels
[Wed Oct 26 21:34:53 2011] 58.735180 total counts/ 2.922980 bgd. counts: snr = 32.644966
Spatial fit parameters:
  Offset between fit and detection position for source 144 = 0.912911 pixels
  Position = (704.3, 232.1) = 6 7 29.23 -6 26 13.1
  Extent = 1.5 (1.2-1.8)", rotation angle = 0
  Source counts = 55.8 +/- 7.7
  Background counts = 2.9
  Rate = 0.0006 +/- 8e-05
[Wed Oct 26 21:34:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:53 2011] Source does appear to be extended
[Wed Oct 26 21:34:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:51 2011] Initial guess for spatial extent in simple fitting = 1.45"
[Wed Oct 26 21:35:51 2011] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.028
[Wed Oct 26 21:35:51 2011] Giving source the simple spatial ID 42 for pass 1, mean size = 1.45"
[Wed Oct 26 21:35:56 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src42.ximg exists
[Wed Oct 26 21:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src42.csv
[Wed Oct 26 21:35:56 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src42_1.ximg exists
[Wed Oct 26 21:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src42.csv
[Wed Oct 26 21:35:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src42.ximg exists
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src42_1.ximg exists
[Wed Oct 26 21:35:59 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src42 appears to have run properly
[Wed Oct 26 21:36:49 2011] Spatial fit model total counts = 54.014700, observed total counts = 57.000000
[Wed Oct 26 21:36:49 2011] Offset between fit and detection position for source 144 = 0.173902 pixels
[Wed Oct 26 21:36:49 2011] 53.348538 total counts/ 0.022538 bgd. counts: snr = 355.206053
Spatial fit parameters:
  Offset between fit and detection position for source 144 = 0.173902 pixels
  Position = (704.2, 232.3) = 6 7 29.23 -6 26 13.0
  Extent = 1.4 (1.1-1.7)", rotation angle = 0
  Source counts = 53.3 +/- 7.3
  Background counts = 0.0
  Rate = 0.0006 +/- 8e-05
[Wed Oct 26 21:36:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:49 2011] Source does appear to be extended
[Wed Oct 26 21:36:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:47:04 2011] Not overwriting source region fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_src.reg
[Wed Oct 26 21:47:04 2011] Extracting stamp from image fullrun_ccd3_acisf01882_pi14-548_cl_sm2.00.img.gz, (638, 166) - (770, 298)
[Wed Oct 26 21:47:04 2011] Writing fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144.gif
[Wed Oct 26 21:49:13 2011] ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_src.evt and ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_bgd.evt exist, delete to re-create
[Wed Oct 26 21:49:13 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_src.evt.gz[events] = 62 counts
[Wed Oct 26 21:49:13 2011] Mean chipx,y = (908.77, 230.76)
[Wed Oct 26 21:49:13 2011] Mean tdetx,y = (4901.24, 3969.77)
[Wed Oct 26 21:49:13 2011] chipx,y range = (889.00-931.00, 205.00-253.00)
[Wed Oct 26 21:49:13 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_bgd.evt.gz[events] = 91 counts
[Wed Oct 26 21:49:13 2011] ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_src.img and ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_bgd.img exist, delete to re-create
[Wed Oct 26 21:49:13 2011] ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_src.pi and ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_bgd.pi exist, delete to re-create
[Wed Oct 26 21:49:13 2011] Not generating rmf since there are only 53 counts
[Wed Oct 26 21:49:16 2011] ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_bgd.lc exist, delete to re-create
[Wed Oct 26 21:55:14 2011] 182.65
[Wed Oct 26 21:55:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:51 2011] Error reading totcts from fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144_src.pi.gz
[Wed Oct 26 21:55:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:53 2011] Using photon index=1.80, rate=0.000551, arf fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src144.arf
[Wed Oct 26 21:55:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:53 2011] Updating source flux to 6.6e-15
[Wed Oct 26 21:57:51 2011] Source 144 has fewer than 100.000000 counts, skipping spectral fitting