[Wed Oct 26 21:31:57 2011] Detection parameters:
  Position = (643.5, 723.8) = 6 7 31.22 -6 22 10.9
  Extent = 0.9" x 0.6", rotation angle = 125 degrees
  Source counts = 60.2 +/- 7.9
  Background counts = 2.8
  Rate = 0.0006 +/- 8e-05

[Wed Oct 26 21:32:02 2011] Off-axis axis estimate = 4.86'
[Wed Oct 26 21:33:53 2011] Using EEF radius (= 1.13 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:53 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Wed Oct 26 21:33:53 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.965
[Wed Oct 26 21:33:53 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 1.13"
[Wed Oct 26 21:33:55 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src41.ximg exists
[Wed Oct 26 21:33:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src41.csv
[Wed Oct 26 21:33:55 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src41_1.ximg exists
[Wed Oct 26 21:33:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src41.csv
[Wed Oct 26 21:33:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:34:00 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src41.ximg exists
[Wed Oct 26 21:34:00 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists
[Wed Oct 26 21:34:00 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass0_tfrozen_src41 appears to have run properly
[Wed Oct 26 21:34:53 2011] Spatial fit model total counts = 67.228200, observed total counts = 67.000000
[Wed Oct 26 21:34:53 2011] Offset between fit and detection position for source 108 = 0.821589 pixels
[Wed Oct 26 21:34:53 2011] 66.440600 total counts/ 9.179200 bgd. counts: snr = 18.899902
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 0.821589 pixels
  Position = (643.7, 724.6) = 6 7 31.23 -6 22 10.8
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 57.3 +/- 8.2
  Background counts = 9.2
  Rate = 0.0006 +/- 8e-05
[Wed Oct 26 21:34:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:53 2011] Source does appear to be extended
[Wed Oct 26 21:34:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:51 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Wed Oct 26 21:35:51 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.202
[Wed Oct 26 21:35:51 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 0.88"
[Wed Oct 26 21:35:56 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src41.ximg exists
[Wed Oct 26 21:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src41.csv
[Wed Oct 26 21:35:56 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src41_1.ximg exists
[Wed Oct 26 21:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src41.csv
[Wed Oct 26 21:35:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01882_pi14-548_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src41.ximg exists
[Wed Oct 26 21:35:59 2011] fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Oct 26 21:35:59 2011] Fit fullrun_ccd3_acisf01882_pi14-548_cl_pass1_tfrozen_src41 appears to have run properly
[Wed Oct 26 21:36:49 2011] Spatial fit model total counts = 66.844200, observed total counts = 66.000000
[Wed Oct 26 21:36:49 2011] Offset between fit and detection position for source 108 = 0.056247 pixels
[Wed Oct 26 21:36:49 2011] 65.702620 total counts/ 8.087920 bgd. counts: snr = 20.258854
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 0.056247 pixels
  Position = (643.7, 724.7) = 6 7 31.23 -6 22 10.7
  Extent = 0.8 (0.7-1.1)", rotation angle = 0
  Source counts = 57.6 +/- 8.1
  Background counts = 8.1
  Rate = 0.0006 +/- 8e-05
[Wed Oct 26 21:36:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:49 2011] Source does appear to be extended
[Wed Oct 26 21:36:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:47:04 2011] Not overwriting source region fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_src.reg
[Wed Oct 26 21:47:04 2011] Extracting stamp from image fullrun_ccd3_acisf01882_pi14-548_cl_sm2.00.img.gz, (606, 687) - (681, 762)
[Wed Oct 26 21:47:04 2011] Writing fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108.gif
[Wed Oct 26 21:49:10 2011] ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_src.evt and ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_bgd.evt exist, delete to re-create
[Wed Oct 26 21:49:10 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_src.evt.gz[events] = 64 counts
[Wed Oct 26 21:49:10 2011] Mean chipx,y = (552.09, 575.72)
[Wed Oct 26 21:49:10 2011] Mean tdetx,y = (4556.28, 3613.09)
[Wed Oct 26 21:49:10 2011] chipx,y range = (534.00-571.00, 555.00-597.00)
[Wed Oct 26 21:49:10 2011] Size of ../../acisf01882/products/events/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_bgd.evt.gz[events] = 28 counts
[Wed Oct 26 21:49:10 2011] ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_src.img and ../../acisf01882/products/images/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_bgd.img exist, delete to re-create
[Wed Oct 26 21:49:10 2011] ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_src.pi and ../../acisf01882/products/spectra/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_bgd.pi exist, delete to re-create
[Wed Oct 26 21:49:10 2011] Not generating rmf since there are only 57 counts
[Wed Oct 26 21:49:13 2011] ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_bgd.lc exist, delete to re-create
[Wed Oct 26 21:55:14 2011] 187.381
[Wed Oct 26 21:55:51 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:51 2011] Error reading totcts from fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108_src.pi.gz
[Wed Oct 26 21:55:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:53 2011] Using photon index=1.80, rate=0.000595, arf fullrun_ccd3_acisf01882_pi14-548_pass1_cl_src108.arf
[Wed Oct 26 21:55:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:53 2011] Updating source flux to 6.9e-15
[Wed Oct 26 21:57:51 2011] Source 108 has fewer than 100.000000 counts, skipping spectral fitting